The research efforts on GaN-based light-emitting diodes (LEDs) keep increasing due to their significant impact on the illumination industry. Surface mount technology (SMT) is widely used to mount the LED packages for practical application. In surface mount soldering both the device body and leads are intentionally heated by a reflow process. We studied on the effects of multiple reflows on microstructural variation and joint strength of the solder joints between the LED package and the substrate. In this study, Pb-free Sn-3.0Ag-0.5Cu solder and a finished pad with organic solderability preservatives (OSP) were employed. A $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed during the multiple reflows, and the thickness of the IMC layerincreased with an increasing number of reflows. The shear force decreased after three reflows. From the observation of the fracture surface after a shear test, partially brittle fractures were observed after five reflows.
Microstructure and mechanical property of In48Sn solder on electrolytic Au/Ni/Cu BGA substrate were investigated with the number of reflows. AuIn and AuIn$_2$ IMCs were formed at the interface solder and pad after 1reflow. An increase of the number of reflows changed AuIn into AuIn$_2$. AuIn$_2$ IMC layer at the interface broke and spalled away into the solder after 3reflows. Shear force decreased with the number of reflows because the weakness of the interface by the spalling of AuIn$_2$ IMC layer.
The microstructural evolutions and shear properties of the pure Sn solder bumps with Ni UBMs were investigated during multiple reflows and high temperature storage(HTS) tests. Only a $Ni_3Sn_4$ IMC was found at the bump/Ni UBM interface after 1 reflow. The layer thickness of these IMCs increased with increasing reflow number and testing time. The solder bumps showed a good reliability during multiple reflows and HTS tests.
The interfacial reactions and shear strength of pure Sn solder bump were investigated with different under bump metallizations (UBMs) and reflow numbers. Two different UBMs were employed in this study: Cu and Ni. Cu6Sn5 and Cu3Sn intermetallic compounds (IMCs) were formed at the bump/Cu UBM interface, whereas only a Ni3Sn4 IMC was formed at the bump/Ni UBM interface. These IMCs grew with increasing reflow number. The growth of the Cu-Sn IMCs was faster than that of the Ni-Sn IMC. These interfacial reactions greatly affected the shear properties of the bumps.
본 논문에서는 유기 기판 위에 $100{\mu}m$ 피치를 갖는 플립칩 구조인 Cu(60 um)/SnAg(20 um) 더블 범프 플립칩 어셈블리를 구현하여 이의 리플로우, 고온 유지 신뢰성, 열주기 신뢰성, Electromigration 신뢰성을 평가하였다. 먼저, 리플로우의 경우 횟수와 온도에 상관없이 범프 접속 저항의 변화는 거의 나타나지 않음을 알 수 있었다. 125도 고온 유지 시험에서는 2000시간까지 접속 저항 변화가 관찰되지 않았던 반면, 150도에서는 Kirkendall void의 형성으로 인한 접속 저항의 증가가 관찰되었다 또한 Electromigration 시험에서는 600시간까지 불량이 발생하지 않았는데 이는 Al금속 배선에서 유발되는 높은 전류 밀도가 Cu 칼럼의 높은 두께로 인해 솔더 영역에서는 낮아지기 때문으로 해석되었다. 열주기 시험의 경우, 400 cycle 이후부터 접속 저항의 증가가 발견되었으며, 이는 열주기 시험 동안 실리콘 칩과 Cu 칼럼 사이에 작용하는 압축 변형에 의해 그 사이에 있는 Al 및 Ti 층이 바깥쪽으로 밀려나감으로 인해 발생하는 것으로 확인되었다.
본 논문에서는 다양한 조성의 주석-은-구리 합금계 솔더볼과 ENIG 및 Cu-OSP 패드와의 계면 반응에 대해 연구하였다. ENIG 패드와 미량의 Sb이 첨가된 합금 솔더와의 계면 반응 시 다른 솔더에 비해 매우 얇은 100 nm 내외의 두께를 가진 P-rich Ni layer가 형성되었다. 미량의 Ni이 첨가된 합금 솔더와 Cu-OSP 금속 패드와의 계면 반응 시에는 다른 솔더와는 달리 균일한 두께의 $Cu_6Sn_5$ 금속간화합물이 형성되었으며 추가 리플로우 시에 금속간화합물 입자가 거의 성장하지 않았다. 또한 $150^{\circ}C$의 장시간 열처리 시에 다른 솔더에 비해 매우 얇은 두께의 $Cu_3Sn$ 금속간화합물이 형성되었다.
본 연구에서는 electroless nickel / immersion gold (ENIG) 처리된 printed circuit board (PCB)를 무연 솔더인 Sn-3.5(wt%)Ag로 접합하였다. 리플로우 횟수를 1회부터 10회까지 다양하게 하여 리플로우 횟수가 증가함에 따른 솔더 접합부의 기계적, 전기적 특성의 변화에 대해 연구하였다. 접합부의 미세 조직 관찰을 위해 접합부 단면을 폴리싱 하여 금속간 화합물의 두께를 측정하고 종류를 분석하였다. 접합부의 기계적 특성을 평가하기 위해서 die 전단 시험을 하였는데, 리플로우 횟수가 4-5회일 때까지 전단 강도 값이 증가하다가 5회 이후로 감소하였다. 전기적 특성을 알아보기 위해 전기 저항 값을 측정하였는데, 리플로우 횟수가 증가할수록 접합부의 전기 저항 값은 점점 증가하였다.
솔더 범프를 사용하는 플립 칩 접속기술에서 범프와 칩 사이에 위치하는 금속 충들의 조합을 UBM(Under Bump Metallurgy)라고 부르며 이 UBM을 어떤 조합으로 사용하는 가에 따라 접속의 안정성이 크게 좌우된다. 본 연구에서는 UBM중에서 솔더 접착 층으로 사용되는 구리 층의 두께를 $1\mu\textrm{m}와 5\mu\textrm{m}$로 하는 한편 barrier 층으로 사용되는 금속 층을 Ti, Ni, Pd으로 변화시키면서 이들 UBM과 공정 납-주석 사이의 계면반응을 살펴보았다. 이를 위해 $100\mu\textrm{m}$ 크기의 솔더 범프를 전해도금법을 사용하여 제작하고 리플로 횟수와 시효시간에 따른 각 UBM에서의 금속간 화합물의 성장을 관찰하였다. $Cu_6Sn_5 \eta'$-상 금속간 화합물이 모든 조건에서 형성되었고 Cu층의 두께가 $5\mu\textrm{m}$로 두꺼운 경우에는 $Cu_3Sn \varepsilon$-상도 관찰되었다. Pd을 사용한 UBM 구조에서는 시효 처리시에 $Cu_6Sn_5$ 상 아래쪽에 $PdSn_4$상이 형성되었다. 또한 이들 계면에서의 금속간 화합물의 성장은 솔더 범프의 접속강도 값과 밀접한 관계를 가진다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.