• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.317-327
• /
• 2019

High-speed railway bridge piers in seismically active area may be subjected to multiple earthquakes and then produce cumulative residual deformation. To study the cumulative residual deformation of high-speed railway bridge piers under multiple earthquakes, a nonlinear numerical analytical model with multi-DOF (MDOF) system is presented and validated against two shaking table tests in this paper. Based on the presented model, a simple supported beam bridge pier model of high-speed railway is established and used to investigate the cumulative residual deformation of high-speed railway bridge pier under mainshock-aftershock sequences and swarm type seismic sequences. The results show that the cumulative residual deformation of the bridge pier increases with earthquake number, and the increasing rates are different under different earthquake number. The residual deformation of bridge pier subjected to multiple earthquakes is accumulated and may exceed the limit of code.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2800-2811
• /
• 1996

The deformation of a structure shall be called homologous, if a given geometrical relation holds, for a given number of structural points, before, during, and after the deformation. Some researchers have utilized the idea on structural design with finite element method. The approaches use the decomposition of the FEM equation or equality of eqality equations to obtain homologous deformation. However, weight reduction and response constraints such as stress, displacement or natural frequency cannot be considered by those theories. An optimization method solving the above problems is suggested to gain homologous deformation. Homology constraints can be considered under multiple loadindg conditions as well as a single loading condition. Homology index is defined for the multiple loading conditions Examples are solved to present the performances of the method.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.527-535
• /
• 2017

In this study, an aging deformation statistical model for a unique high and steep rock slope was proposed, and the aging characteristic of the slope deformation was better reflected. The slope displacement was affected by multiple-environmental factors in multiple scales and displayed the same tendency with a rising water level. The statistical model of the high and steep rock including non-aging factors was set up based on previous analyses and the study of the deformation and residual tendency. The rule and importance of the water level factor as a non-aging unit was analyzed. A partitioned statistical model and mutation model were established for the comprehensive cumulative displacement velocity with the monitoring study under multiple factors and multiple parameters. A spatial model was also developed to reflect and predict the whole and sectional deformation character by combining aging, deformation and space coordinates. A neural network model was built to fit and predict the deformation with a high degree of precision by mastering its feature of complexity and randomness. A three-dimensional finite element model of the slope was applied to approach the structure character using numerical simulations. Further, a three-dimensional finite element model of the slope and dam was developed, and the whole deformation state was analyzed. This study is expected to provide a powerful and systematic method to analyze very high, important and dangerous slopes.

• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.57-64
• /
• 2007

In the recent years, development of machine tool with high speed feeding system have brought a rapid increase in productivity. Practically, thermal deformation problem due to high speed is, however, become a large obstacle to realize high precision machining. In this study, therefore, the construction of automatic error compensation system to control thermal deformation in high speed feeding system with real time is proposed. To attain this purpose, high speed feeding system with feeding speed 60mm/min is developed and experimental equation for relationship between thermal deformation and temperature of ball screw shaft using multiple regression analysis is established. Furthermore, in order to analyze thermal deformation error, compensation coefficient is determined and thermal deformation experiments is carried out. From obtained results, it is confirmed that automatic error compensation system constructed in this study is able to control thermal deformation error within $15{\sim}20{\mu}m$.

• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.1-14
• /
• 2007

Because of complexity, the literature regarding the free vibration analysis of a Timoshenko beam carrying "multiple" spring-mass systems is rare, particular that regarding the "exact" solutions. As to the "exact" solutions by further considering the joint terms of shear deformation and rotary inertia in the differential equation of motion of a Timoshenko beam carrying multiple concentrated attachments, the information concerned is not found yet. This is the reason why this paper aims at studying the natural frequencies and mode shapes of a uniform Timoshenko beam carrying multiple intermediate spring-mass systems using an exact as well as a numerical assembly method. Since the shear deformation and rotary inertia terms are dependent on the slenderness ratio of the beam, the shear coefficient of the cross-section, the total number of attachments and the support conditions of the beam, the individual and/or combined effects of these factors on the result are investigated in details. Numerical results reveal that the effect of the shear deformation and rotary inertia joint terms on the lowest five natural frequencies of the combined vibrating system is somehow complicated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.834-839
• /
• 2007

This paper investigates the distortion of magnetic field of a brushless DC (BLDC) motor due to deformed rubber magnet. Global or local deformation of rubber magnet in the BLDC motor is mathematically modeled by using the Fourier series. Distorted magnetic field is calculated by using the finite element method, and unbalanced magnetic force are calculated by using the Maxwell stress tensor. The first harmonic deformation in the global deformation of rubber magnet generates the first harmonic driving frequency of the unbalanced magnetic force, and the rest harmonic deformations of rubber magnet except the harmonic deformation with multiple of common divisor of pole and slot introduces the driving frequencies with multiple of slot number ${\pm}1$ to the unbalanced magnetic force. However, the harmonic deformation with multiple of common divisor of pole and slot does not generate unbalanced magnetic force due to the rotational symmetry. When the rubber magnet is locally deformed, the unbalanced magnetic force has the first harmonic driving frequency and the driving frequencies with multiples of slot number ${\pm}1$.

• Advances in aircraft and spacecraft science
• /
• 제10권2호
• /
• pp.127-140
• /
• 2023

The present article focuses on the thermoelastic deformation behavior of inhomogeneous functionally graded metal/ceramic cylindrical shell structure with multiple perforations using 2D finite element approximation. Here, cylindrical shell structure is considered with single (1×1) and multiple (2×2, 3×3 and 4×4) perforations. The temperature-dependent elastic and thermal properties of functionally graded material are evaluated using Voigt's micromechanical material scheme via power-law function. The kinematics of the proposed model is based on the equivalent single-layer first-order shear deformation mid-plane theory with five degrees-of-freedom. Here, 2D isoparametric finite element solutions are obtained using eight-node quadrilateral elements. The mesh refinement of present finite element model is performed to confirm the appropriate number of elements and nodes for the analysis purpose. Subsequently, a comparison test is conducted to demonstrate the accuracy of present results. In later section, numerous numerical illustrations are demonstrated at different set of conditions by varying structural, material and loading parameters and that confirms the significance of various parameters such as power-law index, aspect ratio, thickness ratio, curvature ratio, number of perforations and temperature on the deformation characteristics of functionally graded cylindrical shell structure.

• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.3100-3105
• /
• 2010

본 아스팔트 포장의 소성변형은 우리나라 도로포장의 대표적인 파손유형 중 하나이다. 소성변형을 평가하기 위하여 동하중을 이용한 삼축압축 반복재하시험을 수행하였다. 실험결과(하중 및 변형)를 이용하여 국내 아스팔트 포장의 소성변형 파손을 평가 및 예측할 수 있는 파손모형을 개발하였다. 파손모형은 다중회귀분석 및 인공신경망을 이용하여 비교 및 평가하였다.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.1-8
• /
• 2005

아스팔트 포장에서 소성변형은 교통하중에 의해 발생하는 가장 심각한 파손중의 하나이다. 현재 개발중인 한국형 포장 설계법은 역학적-경험적 설계법으로 다양한 포장 파손 예측모델을 필요로 한다. 이 연구는 포장설계시 아스팔트층에서 발생하는 소성 변형량을 예측할 수 있는 모델을 개발하여 포장의 공용성을 규명하고자 하였다. 본 논문은 아스팔트 혼합물의 소성변형에 영향을 미치는 인자를 규명하고, 소성변형 예측 모델을 개발하고자 한다. 이를 위하여 3단계 온도, 공극률을 조합한 19mm 밀입도 혼합물에 대하여 삼축압축 반복재하시험을 수행하였다. 그 결과 혼합물의 온도와 공극률이 소성변형 예측 모델 계수에 영향을 미치는 것으로 확인되었다. 이에 근거하여 19mm밀입도 아스팔트 혼합물에 대한 소성변형 예측식을 다중 회귀분석을 통하여 개발하였으며, 개발된 모델을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.736-739
• /
• 1995

The meshless adaptive method based on multiple scale analysis is developed to simulate large deformation problems. In the procedure, new particles are simply added to the orginal particle distribution because meshless methods do not require mesh structures in the formulations. The high scale component of the approximated solution detects the localized region where a refinement is needed. The high scale component of the second invariant od Green-Lagrangian strain tensor is suggested as the new high gradient detector for adaptive procedures. The feasibility of the proposed theory is demonstrated by a numerical experiment for the large deformation of hyperelastic materials.