• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.172-178
• /
• 2009

Recently, autopilot is essential to reduce pilot's workload and increase flight safety. Avionics system of the small aircraft also has progressively adopted centralized multi-processor and multi-process computing architectures similar to the integrated modular avionics of B-777. It is increased more and more that importance of the flight control system. In this paper, the performance of the autopilot for the small aircraft has been verified with Hardware-In-the-Loop Simulation(HILS). Also, the autopilot algorithm that is operated in the Flight Control Computer(FCC) for the Fly by Wire(FBW) was verified with PILS and compared with the HILS results for the several commercial autopilots.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.963-966
• /
• 2015

This paper introduces a programmable multi-format video decoder(MFD) to support HEVC(High Efficiency Video Coding) standard and for other video coding standards. The goal of the proposed MFD is the high-end FHD(Full High Definition) video decoder needed for a DTV(Digital Tele-Vision) SoC(System on Chip). The proposed platform consists of a hybrid architecture that is comprised of reconfigurable processors and flexible hardware accelerators to support the massive computational load and various kinds of video coding standards. The experimental results show that the proposed architecture is operating at a 300MHz clock that is capable of decoding HEVC bit-stream of FHD 30 frames per second.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.19-23
• /
• 2001

DSP-based implementation is pervasive in wireless communication parts for systems and handsets according to developing high-speed and low-power programmable Digital Signal Processor (DSP). In this paper, we present a real-time implementation of multi-channel Adaptive Multi-rate (AMR) speech coder. The real-time implementation of an AMR algorithm is achieved using 32-bit fixed-point TMS320C6202 DSP chip that operates at 250 MHz. We performed cross compile, linear assembly optimization and TMS320C62xx assembly optimization for real-time implementation. Furthermore, speech data input/output function and communication function with external CPU is included in an AMR speech coder. The AMR Speech coder developed using DSP EVM board was evaluated in ETRI IMT-2000 Test-bed system.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.185-194
• /
• 2017

In this paper, a modular platform for wearable devices is proposed which can be easily assembled by exchanging functions according to various field and environment conditions. The proposed modular platform consists of a 32-bit RISC CPU, a 32-bit symmetric multi-core processor, and a 16-bit DSP. It also includes a plug & play features which can quickly respond to various environments. The sensing and communication modules are connected in the form of a chain. This work is implemented in a standard 130 nm CMOS technology and the proposed modular wearable platforms are verified with temperature and humidity sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.439-446
• /
• 1998

This paper presents design of SD adder and PD adder on Multi-Valued Logic. For implementing of Multi-valued logic circuits we use Current-mode CMOS circuits and also use Voltage-mode CMOS circuits partially. The proposed arithmetic circuits was estimated by SPICE simulation. At the SD(Signed-Digit) number presentation applying Multi-Valued logic the carry propagation is always limited to one position to the left this number presentation allows fast parallel operation. The addition method that add M operands using PD( positive digit number) is effective not only for the realization of the high-speed compact arithmetic circuit, but also for the reduction of the interconnection in the VLSI processor. therefor, if we use PD number representation, the high speed processor can be implementation.

• Journal of IKEEE
• /
• v.12 no.4
• /
• pp.246-254
• /
• 2008

This paper represents a design of a 4 way SIMD processor with multi-thread and dual phase instruction pipeline. 8 threads can be performing in round-robin order, so any hazards can’t occur. The dual phase pipeline makes a pipeline operate as two pipelines, and it can fetch maximum 4 unit instructions at once. This variable length instruction set divide into first phase and second phase instructions, and with this function, complex branch and addressing can be executed at one clock cycle. This processor reduces the code size to quarter, pull out the doubled performance improvement than normal SIMD architecture.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.391-398
• /
• 2007

In this paper, we design a future mobile camera standard interface based on the MIPI CSI-2 and D-PHY specification. The proposed CSI-2 have the efficient multi-lane management layer, which the independent buffer on the each lane are merged into single buffer. This scheme can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. The proposed CSI-2 & D-PHY are verified under test bench. We make an experiment on CSI-2 & D-PHY with FPGA type test-bed and implement them onto a mobile handset. The proposed CSI-2 & D-PHY module are used as both the bridge type and the future camera processor IP for SoC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.74-79
• /
• 2007

In general, the high cost, long time, and complex steps are required in the design and implementation of MPSoC(Multi-Processor System on a Chip), therefore a platform is used to test the functionality and performance of IPs(Intellectual Properties). In this paper, we study a platform architecture to verify IPs based on Interconnect Network among processors, and show that the MPSoC platform gives better performance than a single processor for an application program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.347-357
• /
• 2004

Network systems have been developed to meet the high performance of forwarding packets and flexibility for providing various services, so network processor emerged. In order to improve the performance of network processors, fast external interface and special functional units have been used. Recently as an architectural method of improving performance, the SMT(Simultaneous Multi Threading) architecture is proposed, but this architecture is difficult to implement due to its complexity. Therefore research for architectural optimization is needed to develop the SMT network processors. In this paper we analyze each functional units on performing network algorithms and propose an optimized SMT network Processor architecture.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.37-40
• /
• 2004

This paper is about Multi-function RFID Reader Platform that receives RF TAC data and transfer data to HOST PC through Blue-Tooth USB, RS-232 and Ethernet. This Reader system is composed of RFID Module, ARM Processor, RS-232, US5 and Ethernet Interface, etc.. The information of Tag stretches the RFID module through the antenna and is received at the ARM processor. ARM processor accomplishes the facility to deliver these informations at the PC server using the Blue-tooth Interface for the wireless and the RS-232, USB and Ethernet MAC Interface for the wire.