• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.96-111
• /
• 2012

Hull Mounted Sonar (HMS) is a long range submerged vehicle's hull-mounted passive sonar system which detects low-frequency noise caused by machineries of enemy ships or submerged vehicles. The HMS needs a sound absorption /insulation multi-layer structure to shut out the self-noise from own machineries and to amplify signals from outside. Therefore, acoustic analysis of the multi-layer system should be performed when the HMS is designed. This paper simplified the HMS multi-layer system to be an infinite planar multi-layer model. Also, main excitations that influence the HMS were classified into mechanical, plane wave and turbulent flow excitation, and the investigations for each excitation were performed for various models. Stiffened multi-layer analysis for mechanical excitation and general multi-layer analysis for turbulent flow excitation were developed. The infinite planar multi-layer analysis was expected to be more useful for preliminary design stage of HMS system than the infinite cylindrical model because of short analysis time and easiness of parameter study.

• 대기
• /
• 제21권2호
• /
• pp.151-162
• /
• 2011

One-layer solar radiation(GWNU; Gangneung-Wonju National University) model is developed in order to resolve the lack of vertical observations and fast calculation with high resolution. GWNU model is based on IQBAL(Iqbal, 1983) and NREL(National Renewable Energy Laboratory) methods and corrected by precise multi-layer LBL(Line-by-line) model. Input data were used 42 atmospheric profiles from Garand et al.(2001) for calculation of global radiation by the Multi-layer and one-layer solar radiation models. GWNU model has error of about -0.10% compared with LBL model while IQBAL and NREL models have errors of about -3.92 and -2.57%, respectively. Global solar radiation was calculated by corrected GWNU solar model with satellites(MODIS, OMI and MTSAT-1R), RDPS model prediction data in Korea peninsula in 2009, and the results were compared to surface solar radiation observed by 22 KMA solar sites. All models have correlation($R^2$) of 0.91 with the observed hourly solar radiation, and root mean square errors of IQBAL, NREL and GWNU models are 69.16, 69.74 and $67.53W/m^2$, respectively.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1931-1934
• /
• 2006

The accuracy impact of using high-order Boussinesq-type model as compared to the typical order model is examined in this paper. The multi-layer model developed by Lynett and Liu(2004a) is used for simulating of wave breaking over a step region. The overall comparisons between the two-layer model and the hydraulic experiments are quite good. The one-layer model overshoals the wave near the breakpoint, while the two-layer model shoals at a rate more consistent with the experimental data.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.53-56
• /
• 2002

We have developed a Monte Carlo (MC) simulator for electron beam lithography in multi-layer resists and multi-layer substrates in order to fabricate and develop high-speed PHEMT devices for millimeter- wave applications. For the deposited energy calculation to multi-layer resists by electron beam in MC simulation, we modeled newly for multi-layer resists and heterogeneous multi-layer substrates. Using this model, we simulated T-gate or r-gate fabrication process in PHEMT device and showed our results with SEM observations.

• Computers and Concrete
• /
• 제31권1호
• /
• pp.9-21
• /
• 2023

The published studies usually used analytical method, numerical methods or experimental method to determine the stress-strain state and displacement of the single-layer or multi-layer curved shell types, but with a small scale model. However, a full scale multi-layer doubly curved concrete shell roof model should be researched. This paper presents the results of the experiment and simulation analysis involving stress-strain state, sliding between layers, the formation and development of the full scale double-layer doubly curved concrete shell roof when this shell begins to crack. The results of the this study have constructed the load-sliding strain relationship; strain diagram; stress diagram in the shell layers; the N_x, N_y membrane force diagram and deflection of shell. Thisresults by experimental method on a full scale model of concrete have clarified the working of multi-layer doubly curved concrete shell roof. The experimental and simulation results are compared with each other and compared with the Sap2000 software.

• Composites Research
• /
• 제36권4호
• /
• pp.253-258
• /
• 2023

교통수단의 발전은 이동이 불편한 장애인들의 이동권 보장을 실현하였지만 차량사고시 발생할 수 있는 장애인 탑승객의 안전 향상은 일반 승객좌석에 비해 낮다고 할 수 있다. 특히 갑자기 발생할 수 있는 후방 추돌 사고의 경우 장애인 탑승객의 머리와 목 부상에 취약한 것이 현실이다. 이에 본 연구에서는 휠체어 운송 차량의 후방 추돌 시 차량내 장애인 탑승객의 머리와 목 상해지수 개선을 위해 headrest를 관상면으로 3등분한 multi-layer headrest foam이 제안되었다. 간이 모델을 통한 저속 후방 추돌 해석을 통해 foam의 다양한 압축 특성을 부여하기 위한 stress scale factor의 범위가 선정되었으며, 해당 범위를 parameter로 지정하여 GA최적화가 수행되었다. 최적화결과를 통해 layer의 압축 특성에 따른 HIC와 NIC간의 상간관계 분석이 이뤄졌으며, HIC는 Front layer, NIC는 Mid layer의 압축 특성에 가장 민감하게 반응하였고 Rear layer의 압축 특성은 가장 낮게 나타났다. Validation model에 일반headrest와 최적화된 multi-layer headrest를 각각 배치하여 저속 후방 추돌 sled test 해석을 수행하였으며, 일반headrest대비 multi-layer headrest에서의 HIC와 NIC가 낮게 도출되었다. multi-layer headrest에서의 압축 거동 역시 명확하게 나타나 multi-layer headrest가 일반headrest대비 머리와 목의 상해지수 개선에 효과적인 것이 검증되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1145-1148
• /
• 1998

New capacitance modeling and transient analysis for multi-layer interconnects with shielding effect are presented. The upper layer capacitances with under-layer shielding lines are represented by introducing a filling factor η which can be defined as the ratio of upper-layer line length to the total under-layer line width. The upper-layer effective self capacitances considering two extreme cases which the underlayer metals are assumed as a ground or as a Vdd are modeled. The signal transient analysis with shielding effect model is performed.

• 한국진공학회지
• /
• 제12권3호
• /
• pp.182-192
• /
• 2003

밀리미터파 대역용 고속 PHEMT 소자 제작 및 개발을 위하여 다층 리지스트 및 다원자 기판 구조에서 전자빔 리소그래피 공정을 분석할 수 있는 새로운 몬테 카를로 시뮬레이션 모델을 개발하였다. 전자빔에 의해 다층 다원자 타겟 기판 구조에 전이되는 에너지를 정확하고 효율적으로 계산하기 위하여 다층 리지스트 및 다층 다원자 기판 구조에서 시뮬레이션 가능하도록 새로이 모델링하였다. 본 논문에서 제안 개발된 모델을 사용하여 PHEMT 소자의 전자빔 리소그래피에 의한 T-게이트 형성 공정을 시뮬레이션하고 SEM측정 결과와 비교 분석하여 타당성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.699-707
• /
• 2015

Although digit character recognition has got a significant improvement in recent years, it is still challenging to achieve satisfied result if the data contains an amount of distracting factors. This paper proposes a novel digit character recognition approach using a multi-layer hierarchical model, Hybrid Restricted Boltzmann Machines (HRBMs), which allows the learning architecture to be robust to background distracting factors. The insight behind the proposed model is that useful high-level features appear more frequently than distracting factors during learning, thus the high-level features can be decompose into hybrid hierarchical structures by using only small label information. In order to extract robust and compact features, a stochastic 0-1 layer is employed, which enables the model's hidden nodes to independently capture the useful character features during training. Experiments on the variations of Mixed National Institute of Standards and Technology (MNIST) dataset show that improvements of the multi-layer hierarchical model can be achieved by the proposed method. Finally, the paper shows the proposed technique which is used in a real-world application, where it is able to identify digit characters under various complex background images.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.97-103
• /
• 2012

This study investigates thermal insulation properties of multi layer materials depending on thickness of air layers. Numerical analysis on the heat flow of different insulating materials was conducted to identify whether their temperature distributions demonstrate the reduced rate of heat transfer conclusively or not. Analytical model is divided into two categories. One is to distinguish temperature distribution of the air-layer materials from the non-air layer ones. The other is to compare the efficacy between eight-layered insulating materials with no air-layer contained and three-layered insulating materials which include an air-layer definitely. In the latter case, the identical thickness is assigned to each material. The effect of thermal insulation by including an air-layer is verified in the first analytical model. The result of the second model shows that the insulation of the eight-layered materials is coterminous at the three-layered ones with an air-layer and the thermal insulation of the two materials is imperceptible. The benefits of cost and energy saving are anticipated if air-layers are efficiently incorporated in multi layer insulating materials in a greenhouse.