• Composites Research
• /
• 제34권2호
• /
• pp.123-128
• /
• 2021

본 논문은 Mori-Tanaka법, 혼합법칙 및 Halpin-Tsai 이론식을 적용하여 굴곡진 탄소나노튜브(CNT)로 보강된 복합재의 멀티스케일 고유진동 특성을 규명하였다. Eshelby 텐서를 이용하여 곡률을 갖는 CNT가 함유된 폴리머의 하중 전달 특성값이론을 유도하였다. 도출된 수치해석 결과는 기존의 연구결과와 잘 일치하였다. 본 연구에서 제시한 새로운 결과는 적층 복합재의 CNT 함유량, 굴곡성 및 적층배열의 상호작용 특성을 규명하였다. 주요 결과에 대하여 분석하였으며, CNT 보강 복합재의 실용적 설계를 위한 중요 고려사항을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.336-341
• /
• 2003

In this paper, resonance durability analysis technique is presented for the fatigue life assessment considering dynamic effect of a vehicle system. In the resonance durability analysis, the frequency response and the dynamic load on frequency domain are used. Multi-body dynamic analysis, finite element analysis, and fatigue life prediction method are applied for the virtual durability assessment. To obtain the frequency response and the dynamic load, the computer simulations running over typical pothole and Belgian road are carried out by utilizing vehicle dynamic model. The durability estimations on the rear suspension system of the passenger car are performed by using the presented technique and compared with the quasi-static durability analysis. The study shows that the fatigue life considering resonant frequency of vehicle system can be effectively estimated in early design stage.

• 방송공학회논문지
• /
• 제8권2호
• /
• pp.204-208
• /
• 2003

웨이브릿 변환 기반의 부대역(subband) 분해과정을 새로운 수학적 모델로 표현한다. 제안된 모델은 많은 계층의 분해과정에 거쳐 정규적인 다해상도 해석을 수행할 수 있다. 이러한 접근방식은 단일채널 선형 공간불변 필터링문제를 다채널로 확장할 수 있게 해주는 동시에 선형 공간불변 영상복원문제와 주파수상에서 적응적 제약적 최소제곱(Constrained Least Square:CLS) 필터에 적용될 수 있다. 제안된 필터에서 우리는 부대역의 특징에 따라 적응적으로 다른 변수를 사용할 수 있다. 본 논문에서 제안한 주파수상의 적응적 CLS 필터를 S/W로 구현하였으며, 이 실험을 통해 부대역의 특징을 정화하게 측정할 경우 제안된 주파수상 적응적 CLS 필터는 기존의 단채널 필터에서 벗어나 현저히 화질을 개선할 수 있음을 보여준다.

• 전력전자학회논문지
• /
• 제14권4호
• /
• pp.323-332
• /
• 2009

본 논문에서는 다 출력 LLC 공진 컨버터의 동작 특성 대해 서술하였고 분석하였다. 특히 다 출력 변압기의 2차 측 인덕턴스와 여러 부하조건에 따른 영향에 의해 다 출력 LLC 공진 컨버터의 전압이득특성 및 등가공진주파수가 변한다. 따라서 출력이 다 출력일 때 부하에 따른 공진 특성 변화와 이득 변화를 확인하였고, 또한 부하 동 특성을 고려한 설계와 전압이득 특성을 기본으로 하여 42인치 PDP TV용 전원에 540W 3-output LLC 공진컨버터를 적용하여 실험한 결과를 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.574-582
• /
• 1999

This paper discusses the multi-level optimization method in dynamic optimization problems through stiffened plate of ship structures. In structural optimization the computational cost increases rapidly as the number of design variables increases. And we need a great amount of cal-culation and time on problems of modified dynamic characteristics of large and complicated struc-tures. In this paper the multi-level optimization is proposed which decreases computational time and cost. the dynamic optimum designs of stiffened plate that control the natural frequency and minimize weight subjected to constraints condition are derived. The way to apply the multi-level optimization methods in this study follow: In the first step the dynamic characteristics is controlled for the two-dimensional model of stiffened plate by sensitivity analysis and quasi-least squares methods. In the second step the cross-section of the stiffener is decided so that the weight is minimized under needed constraints by the steepest descent or ascent method. In the third the three-dimensional model is made based on the results of the first step and the second step confirmation and finer tuning of the objective function are carried out. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate.

• 상하수도학회지
• /
• 제27권4호
• /
• pp.479-487
• /
• 2013

This study was to investigate characteristics for the pressure wave propagation and the maximum pressure near a rapid closure valve which was installed the end of multi piping network. The multi piping network consists of one inlet and three outlet with straight pipes. The diameter of the pipes including the valve was 100 mm, 80 mm, 80 mm respectively. The valve was rapidly closed with the instantaneous time which was 0.023s in the level for the water hammer. For the simulation, the influence of the pipe thickness and deformation due to pressure-wave-propagation was not considered. CFD was conducted under the following condition : the initial pressure was 1bar in the inlet and the mass flow rate was 7.83 kg/s in the outlet(the velocity in the pipe with 100 mm diameter was 1 m/s). As the valve have conditions that were status with and without fluid flow in the pipe after valve closing, the maximum pressure change and the frequency analysis were examined. As the results, the case that was status with fluid flow appeared the higher maximum pressure than another's, the maximum frequency band was about 10 ~ 11 Hz.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.367-370
• /
• 2007

In recent, the utilization of underground in urban area is increased as subway, store, and others but we have done a few studies for the inundation of underground due to flooding. So, we investigate the examples of underground inundation and the causes of inundation for flood events. And the relationship between flood characteristics and underground inundation is analyzed through the frequency of rainfall which is made by annual multi maximum series. As a result, most of underground is inundated by high frequency of rainfall. And there are some cases that the underground is inundated by low frequency of rainfall because of poor drainage system and characteristics of location.

• Journal of Communications and Networks
• /
• 제13권6호
• /
• pp.655-663
• /
• 2011

Diffuse optical wireless (DOW) systems have the advantage that they do not require point-to-point siting so one transmitter can communicate with several receivers. In this paper, we investigate multiple access scheduling methods for downlink orthogonal frequency division multiplexing (OFDM) in diffuse optical wireless networks. Unlike the radio frequency (RF) channel, the DOW channel has low-pass filter characteristics and so requires different scheduling methods than those developed for the RF channel. Multi-user diversity orthogonal frequency division multiple access (OFDMA) systems nominate a cluster of subcarriers with the largest signal-to-noise-ratio for transmission. However, in a DOW channel, most users would choose the lowest frequency clusters of subcarriers. To remedy this problem, we make two proposals. The first is to use a variable cluster size across the subcarriers; the lower frequency clusters will have fewer subcarriers while the higher frequency clusters will have more subcarriers. This will equalize the capacity of the clusters. The second proposal is to randomize a user's cluster selection from a group of clusters satisfying a minimum threshold. Through simulation it is shown that combining these strategies can increase the throughput while ensuring a fair distribution of the available spectrum.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.343-346
• /
• 2000

In most inverter/converter applications SVPWM method is the preferred approach for it shows good characteristics in linear modulation range and waveform quality. in this paper we propose a new carrier based SVPWM method for multi-level system. First we survey the conventional carrier based SVPWM method and investigate the problem of the conventional one for the multi-level system with the focus on the switching frequency harmonic flux trajectories. Finally we propose a new carrier based SVPWM method that can reduce harmonic distortion. Simulation and experimental results are given for the verification of the proposed SVPWM method.

• 한국컴퓨터정보학회논문지
• /
• 제15권11호
• /
• pp.1-9
• /
• 2010

집적회로 공정기술이 급속도로 발달하면서 멀티코어 프로세서를 설계하는데 있어서 내부 연결망 (interconnection)은 성능 향상을 방해하는 주요 원인이 되고 있다. 멀티코어 프로세서의 내부 연결망에서 발생하는 병목 (bottleneck) 현상을 해결하기 위한 방안으로 최근에는 2D 평면 구조에서 3D 적층 구조로 설계 방식을 변경하는 기법이 주목을 받고 있다. 3D 구조는 칩 내부의 와이어 길이를 크게 감소시킴으로써 성능 향상과 전력 소모 감소의 큰 이점을 가져오지만, 전력 밀도 증가로 인한 온도 상승의 문제를 발생시킨다. 따라서 효율적인 3D 구조 멀티코어 프로세서를 설계하기 위해서는 내부의 온도 문제를 해결할 수 있는 설계 기법이 우선적으로 고려되어야 한다. 본 논문에서는 실험을 통해 다양한 측면에서 3D 구조 멀티코어 프로세서 내부의 온도 분포를 분석하고자 한다. 3D 구조 멀티코어 프로세서에서 수행되는 프로그램의 특성, 냉각 효과, 동적 주파수 조절 기법 적용에 따른 각 코어의 온도 분포를 상세하게 분석함으로써 저온도 3D 구조 멀티코어 프로세서 설계를 위한 가이드라인을 제시하고자 한다. 실험 결과, 3D 구조 멀티코어 프로세서의 온도를 효과적으로 관리하기 위해서는 더 높은 냉각 효과를 갖는 코어를 상대적으로 더 높은 동작 주파수로 작동 시켜야 하고 온도에 영향을 많이 주는 작업 또한 더 높은 냉각 효과를 갖는 코어에 할당해야 함을 알 수 있다.