• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.123-134
• /
• 2008

In this paper, a routing algorithm for wireless sensor networks is proposed to improve the efficiency of energy consumption in sensor nodes. Each sensor node has the value called ‘Flooding Level’ obtained through the initial flooding from a sink node instead of sending beacon messages in multi-hop sensor field. This value can be used for guaranteeing the sensor nodes to connect with a sink node and determining the roles of cluster-head and cluster-gateway node efficiently and simply during the clustering. If different algorithms are added to our protocol, it will work better in the side of energyefficiency. This algorithm is evaluated through analysis and extensive simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.38-45
• /
• 2004

As optical communication is being substituted for telecommunication, the demand of a large variety of fiber optic components is increasing. V-groove substrates, one of the module components, are used to connect optical fibers to optical planar circuits and to arrange fibers. Their applications are multi-channel optical connectors and optical waveguide fiber coupling, etc. Because these substrates are a critical part of the splitter in a multiplexer and a multi fiber connector, precise and reliable fabrication process is required. For precisely aligning core pitch between fibers, machined core pitch tolerance should be within sub-microns. Therefore, these are generally produced by state-of-the-art micro-fabrication like MEMS. However, most of the process equipment is very expensive. It is also difficult to change the process line for custom designs to meet specific requirements using various materials. For various design specifications such as different values of the V angle and low-priced process, the fabrication method should be flexible and low cost. To achieve this goal, we have suggested a miniaturized machine tool with high accuracy positioning system. Through this study, it is shown that this cutting process can be applied to produce V-groove subtracts. We also show the possibility of using a miniaturized machining system for producing small parts.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.2
• /
• pp.43-50
• /
• 2019

A smart connective control system was invented recently for coupling control of adjacent buildings. Previous studies on this topic focused on development of control algorithm for the smart connective control system and design method of control device. Usually, a smart control devices are applied to building structures after structural design. However, because structural characteristics of building structure with control devices changes, a iterative design is required for optimal design. To defeat this problem, an integrated optimal design method for a smart connective control system and connected buildings was proposed. For this purpose, an artificial seismic load was generated for control performance evaluation of the smart coupling control system. 20-story and 12-story adjacent buildings were used as example structures and an MR (magnetorheological) damper was used as a smart control device to connect adjacent two buildings. NSGA-II was used for multi-objective integrated optimization of structure-smart control device. Numerical simulation results show the integrated optimal design method proposed in this study can provide various optimal designs for smart connective control system and connected buildings presenting good control performance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.101-109
• /
• 1999

The purpose of this study is to analyse types and forms of branch-road in traditional korean villages. To do this, this study has selected and measured 87 branch-road cases of five traditional villages. An analysis of the case study has revealed the following results : 1. Branch-roads have four formations : 3 way, 4 way, multi-way and others. 2. Branch-roads comprise 64 percent of 3 way, 18 percent of 4 way, 8 percent of multi-way and 9 percent of others, respectively. 3. Topographic conditions have mostly affected the formation of branch-roads. 3 way of branch - roads are easily found in flat village. 4 way are multi-way of branch-road are found in semi-hilly and hilly village 4. 3 way of branch-roads have three types: T-type, Y-type, and y-type. 5. T-types are easily found in flat village, but Y-type and y-type are found in semi-hilly and hilly village. 6. Each angle of T-type is 171,99,90, respectively. It has turned out 8 degree is slightly deviated form the square. 7. Y-type of branch-road has an asymmetric form, comprising 145, 128, 87 degree of the angle, compared to 150, 150, 60 degree of symmetric one. 8. Average angles of y-type that are mostly found in hilly village are 175, 113, 72. Angle differences from each spot are 62 and 41 degree. It is assumed that 39 degree is a slope of least effort to walk. 9. 4 way of branch-roads have not only "＋" type but various types of K, Y and Y, Y and y, T and y and a foot of bird. 10. It is assumed that multi-way of branch-roads, mostly found on the middle and bottom of the hilly slope, has naturally formed to connect up and down, left and right.and right.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1764-1769
• /
• 2014

Numerical investigations have been conducted on the junction that connect the multi-tubular section and the single shell section in order to evaluate applicability of hybrid sections in wind turbine towers instead of conventional single shell towers. Major characteristics in structural details include extension of multi-tubular member into shell end section, installation of wing stiffeners, and different layout of floor beams. Elastic and nonlinear incremental analyses were conducted to examine stress concentration patterns and ultimate behaviors, respectively. Based on evaluation of structural performance due to vertical and horizontal forces, it has been confirmed that installation of floor beams and wing stiffeners sensitively affect ultimate strength of global wind tower.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1164-1170
• /
• 2002

In the ACE2000 MPLS system, MPLS Interface Module(MIM) is composed of an ATM Interface Module and a HFMA performing a packet forwarding. In the MIM, the HFMA RSAR receive cells from the Physical layer and reassemble the cells. And the IP Lookup controller perform a packet forwarding after packet classification. Forwarded packet is segmented into cells in the HFMA TSAR and transfer to the ALMA for the transmission to an ATM cell switch. When the MIM make use of an ATM Interface Module, it directly connect the ALMA with a PHY layer using the UTOPIA Level2 interface. Then, an ALMA performs Master Mode. Also, the HFMA TSAR performs the Master Mode in the MIM. Therefore, the UTOPIA-L2 Controller of the Slave Mode require for interfacing between an ALMA and a HFHA TSAR. In this paper, we implement the architecture and cell control mechanism for the UTOPIA-L2 Controller supporting Multi-ports.

• Asian Journal of Innovation and Policy
• /
• v.5 no.1
• /
• pp.55-77
• /
• 2016

This paper focuses on how an integrated or systemic approach is needed to both investigate and connect different kinds of interdisciplinary inquiry and knowledge within and beyond universities to encourage more productive collaboration with the other three ‘macro stakeholders’ - government, business, and the wider community. In this way universities can and should provide a greater leadership role in sustainability, innovation and policy studies. Such a framework is needed to also help to change the view of many that academics should just play a supporting role of providing specialised technical expertise only to the other macro stakeholders. The interdisciplinary and collaborative framework developed here is applied to the on-going water crisis in Malaysia - an exemplary complex problem-solving basis for seeking sustainable policy solutions to diverse challenges. As further discussed, this was applied also in practice to a multi-stakeholder seminar on addressing the difficult policy challenges of the Malaysian water industry and sector.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1246-1251
• /
• 2009

Second Life is a massive multi-user on-line environment; "a 3D virtual world where users can socialize, connect and create using voice and text chat" (http://www.secondlife.com). The paper explores the process and methods to establish a contemporary art exhibition that incudes various shapes and characteristics of art; paintings, 3D sculptures, time-based video arts, technical based arts, and so on. We have also discuss about the technical limitations to make virtual museums in the Second Life and recognitions between human and art works.

• The Journal of Information Technology
• /
• v.7 no.4
• /
• pp.21-30
• /
• 2004

A VPN(Virtual Private Network) is constructed using public wires to connect nodes. It can be used like the dedicated line and maintain the security of the data on the VPN. And It uses encryption and other security mechanisms to ensure that only authorized users can access the network. In this paper we summarize IPsec and VPN technology and construct pilot VPN system for analyzing the performance of remote access VPN. Then we analyze the performance of remote VPN system using VPN concentrator in case of single user and in case of multi users.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.53-60
• /
• 2000

The purpose of this paper is to propose new recovery algorithm for case of a system element raises communication obstacle due to faults in networks, Also we are simulate the algorithm using adjacency matrix. We recover one faulty node per each excution of proposed algorithm so that we can be reconstruct the faulty system gradually to communicatable network. For that, this paper propose a new recovery algorithm named MATRECO which connect the recovery process is simulated by use of adjacency matrix.