• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.3
• /
• pp.162-168
• /
• 2017

Shallow-water bathymetry survey has been conducted using high definition color images obtained at the altitude of 100 m above sea level using a drone. Shallow-water bathymetry data are one of the most important input data for the research of beach erosion problems. Especially, accurate bathymetry data within closure depth are critically important, because most of the interesting phenomena occur in the surf zone. However, it is extremely difficult to obtain accurate bathymetry data due to wave-induced currents and breaking waves in this region. Therefore, optical remote sensing technique using a small drone is considered to be attractive alternative. This paper presents the potential utilization of image processing algorithms using multi-variable linear regression applied to red, green, blue and grey band images for estimating shallow water depth using a drone with HD camera. Optical remote sensing analysis conducted at Wolpo beach showed promising results. Estimated water depths within 5 m showed correlation coefficient of 0.99 and maximum error of 0.2 m compared with water depth surveyed through manual as well as ship-board echo-sounder measurements.

• Journal of Science of Art and Design
• /
• v.10
• /
• pp.51-72
• /
• 2006

Reinterpretation of the visual characteristics of Korean folk painting in contemporary Korean painting is to seek directions of today's Korean painting. When examining expressions of contemporary painting we see that there is a reappearance of iconic images, a reinterpretation of both flatness and multi-perspectives, and an objectifying of pastiche folk icons with an experimental spirit. All of these techniques suggest methods of contemporary Korean painting through 'folk painting'. Although folk painting has been adopted in contemporary Korean painting for a long time, interest increased in the 1980s. With the prevailance of both national characteristic expressive techniques of realism and color painting, artists reinterpreted folk painting in their work, borrowing the traditional five colors, common contents, and iconic images. Particularly, an interest in 'Korean Beauty' drew people's interest back to folk painting which provided the significant 'Korean Beauty' of traditional expressive techniques. This study is to examine the characteristics of selected group of works that created a new expressive technique in today's Korean painting by either the reappearance or the reinterpreting of iconic images of the Chosun Dynasty's folk painting. To achieve these goals, the artists, who modify or reinterpret folk painting's visual characteristics with a contemporary sense, are divided into three categories in this study; 'The Readoption of the Folk Image', 'The Reinterpretation of Folk Characteristics', and 'Experimental Expressions'. As a result, it proves that folk painting is both a classical expression and national expression which was not only favored in the Chosun period, but also can be reinterpreted through today's visual methodology.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.371-376
• /
• 2009

The fruits of sweet cherry are highly appreciated by the consumer due to their precocity and quality, such as their sweetness, color and sourness. In this study, the hot-water extract and its sequential organic solvent fractions were prepared from domestic Napoleon sweet cherry (Prunus avium L.) to investigate antimicrobial and antioxidant activity. The hot-water extract contained about 40% sugars, and the solvent fraction yields for hexane, ethylacetate (EA), butanol, and water residue were 0.01%, 3.45%, 16.30%, and 80.24%, respectively. Contents of total polyphenol and total flavonoid of the fractions were 1.24~5.24%, and 0~3.76%, respectively. Among the fractions, EA fraction showed the highest total polyphenol and total flavonoid concentrations. Evaluation of antimicrobial activity of the extract and fractions revealed that EA fraction and butanol fraction contained strong antibacterial activity against Listeria monocytogenes, Staphylococcus aureus, and Salmonella typhimurium with minimal inhibitory concentration (MIC) of 0.5~1.0 mg/mL. But the extract and fractions tested were not active to Pseudomonas aeruginosa. In a while, only hexane fraction showed anti-Candida activity with 0.5~1.0 mg/mL of MIC. The fraction showed strong activity against different multi-antibiotics resistant strains such as C. albicans CCARM 14020. Antioxidative activity assay showed that EA fraction has a strong DPPH scavenging activity and a reducing power. The $IC_{50}s$ of vitamin E and EA fraction were 15.5 and $195.5\;{\mu}g/mL$, respectively. Our results suggest that the fruit of P. avium L. has high potentials with anti-Candida and antioxidative activity.

• Journal of Applied Biological Chemistry
• /
• v.55 no.4
• /
• pp.207-215
• /
• 2012

Phenolic compounds of $17.9{\pm}1.0mg/g$ were extracted from Ulmus pumila with 70% ethanol. The elastase inhibitory activity related with forming wrinkle was shown an excellent wrinkle improvement effect in 70% ethanol extracts as 55.5-69.5% at phenolic concentration of $50-200{\mu}g/mL$. The tyrosinase inhibitory activity related with skin-whitening was 24% in 70% ethanol extracts at phenolic concentration of $200{\mu}g/mL$. The astringent activity of 70% ethanol extracts was shown activity of 71% at phenolic concentration of $200{\mu}g/mL$ therefore it is judged that there is a high effect on pores reduction of the skin. The hyaluronidase inhibitory activity of U. pumila extracts was confirmed anti-inflammation effect of 80% at phenolic concentration of $50{\mu}g/mL$. Antimicrobial activity of U. pumila water extracts was shown each 8.7, 10.0, 11.1 and 11.8 mm clear zones on Propionebacterium acnes at phenolic concentration of $50-200{\mu}g/mL$. The stability of the multi-functional cosmetic (lotion) added U. pumila extracts was very stable for 28 days without changing of pH and viscosity also it's stable on temperature and sun lights. As the concentration of extracts was increased, the color of lotion was getting dark, but the sensory evaluation was high at score of 8.5.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2011

This study mainly focused on the method of accurately extracting damage information in the im agery change detection process using the constructed high resolution aerial im agery. Bongwha-gun in Gyungsangbuk-do which had been severely damaged from a localized torrential downpour at the end of July, 2008 was selected as study area. This study utilized aerial im agery having photographing scale of 30cm gray image of pre-disaster and 40cm color image of post-disaster. In order to correct errors from the differences of the image resolution of pre-/post-disaster and time series, the prelim inary phase of image processing techniques such as normalizing, contrast enhancement and equalizing were applied to reduce errors. The extent of the damage was calculated using one to one comparison of the intensity of each pixel of pre-/post-disaster im aged. In this step, threshold values which facilitate to extract the extent that damage investigator wants were applied by setting difference values of the intensity of pixel of pre-/post-disaster. The accuracy of optimal image processing and the result of threshold values were verified using the error matrix. The results of the study enabled the early exaction of the extents of the damages using the aerial imagery with identical characteristics. It was also possible to apply to various damage items for imagery change detection in case of utilizing multi-band im agery. Furthermore, more quantitative estimation of the dam ages would be possible with the use of numerous GIS layers such as land cover and cadastral maps.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.149-162
• /
• 2005

This paper suggest a way to detect a specific wanted figure in public places such as subway stations and banks by comparing color face images extracted from the real time CCTV with the face images of designated specific figures. Assuming that the characteristic of the surveillance camera allows the face information in screens to change arbitrarily and to contain information on numerous faces, the accurate detection of the face area was focused. To solve this problem, the normalization work using subsampling with $20{\times}20$ pixels on arbitrary face images, which is based on the Perceptron Neural Network model suggested by R. Rosenblatt, created the effect of recogning the whole face. The optimal linear filter and the histogram shaper technique were employed to minimize the outside interference such as lightings and light. The addition operation of the egg-shaped masks was added to the pre-treatment process to minimize unnecessary work. The images finished with the pre-treatment process were divided into three reception fields and the information on the specific location of eyes, nose, and mouths was determined through the neural network. Furthermore, the precision of results was improved by constructing the three single-set network system with different initial values in a row.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.59.4-60
• /
• 2018

To investigate the impact of the high-redshift quasars on cosmic reionization, the faint end slope of the quasars luminosity function has to be determined precisely. More quasars with low luminosity are needed to constrain the contribution to reionization in the early universe. However, finding these quasars has been regarded as tough process owing to the improper shallow depth of imaging data. In recent days, the release data of Subaru Hyper Suprime-Cam (HSC) Strategic Program survey which provide the deep images reaching ~ 25 mag facilitates searching the faint quasars candidates. To find faint quasar candidates in ELAIS-N1 field, along with the HSC data, two near-infrared (NIR) data sets also be used : The Infrared Medium-deep Survey (IMS) and The UKIRT Infrared Deep Sky Survey (UKIDSS) - Deep Extragalactic Survey (DXS). Quasar candidates selected from the multi-band color cut were observed by the SED camera for QUasars in EArly uNiverse (SQUEAN) instrument. To trace the redshifted Lyman break efficiently, appropriate medium bands comparable to targeted redshift range are chosen. The most reliable quasar candidates are finally determined through SED fitting. Using this less luminous quasars candidates, we can speculate the relation between the quasar growth and the host galaxy unbiasedly and estimate the contribution to the cosmic reionization.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.28-34
• /
• 2014

Recently the depth-image-based rendering (DIBR) method is usually used in 3D image application filed. Virtual view image is created by using a known view with associated depth map to make a virtual view point which did not taken by the camera. But, disocclusion area occur because the virtual view point is created using a depth image based image 3D warping. To remove those kind of disocclusion region, many hole filling methods are proposed until now. Constant color region searching, horizontal interpolation, horizontal extrapolation, and variational inpainting techniques are proposed as a hole filling methods. But when using those hole filling method some problem occurred. The different types of annoying artifacts are appear in texture region hole filling procedure. In this paper to solve those problem, the multi-directional extrapolation method is newly proposed for efficiency of expanded hole filling performance. The proposed method is efficient when performing hole filling which complex texture background region. Consideration of directionality for hole filling method use the hole neighbor texture pixel value when estimate the hole pixel value. We can check the proposed hole filling method can more efficiently fill the hole region which generated by virtual view synthesis result.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.771-777
• /
• 1999

The structural function of three egg membrane layers and cuticle layer, and the effectiveness of 5 film coatings (chitosan, starch, gelatin, dextrin, mineral oil) on the prevention of Salmonella enteritidis penetration was investigated using confocal scanning laser microscopy (CSLM). Diameters of outer membrane fibers, inner membrane fibers and limiting membrane particles in eggshell were $1.5{\sim}7.2$, $0.8{\sim}2.0$ and $0.1{\sim}1.4\;{\mu}m$, respectively and average thicknesses were 10.0, 3.5, $3.6\;{\mu}m$, respectively. Average thickness of cuticle layer was $6.0\;{\mu}m$ and cuticle layer covered $40{\sim}80%$ of total eggshell surface. Average coating films thickness for chitosan, starch, gelatin, dextrin and mineral oil were 2.2, 2.5, 3.9, 3.6 and $5.0\;{\mu}m$, respectively. After immersion process eggshell surface was almost completely covered by coating films. Chitosan coating was most effective among 5 film coatings in inhibiting growth of Salmonella enteritidis. Penetration process of Salmonella enteritidis through eggshell was investigated by multicolor imaging using CSLM and plate counting. Cuticle layer was the most important structure in blocking the penetration. Among 5 film coatings, chitosan showed the best and similar effectiveness with cuticle layer.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.