• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.132-135
• /
• 2005

A modular photovoltaic PCS with high-frequency isolation is proposed. The proposed system consists of a SEPIC converter and a full-bridge inverter. Using the power slope versus voltage of the PV array, the MPPT controller is proposed that produces a smooth transition to the maximum power point. The disturbance of the line voltage is detected using a fast sensing technique. Experimental results obtained on a 500W prototype show high performance such as almost unity power factor, $90\%$ power efficiency, $3.6\%$ THD.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.111-112
• /
• 2012

태양광 멀티스트링 시스템은 각 태양광 패널과 연결된 부스트 컨버터를 통해 개별적 MPPT제어가 가능하기 때문에 전체 시스템의 효율적인 운전이 가능하다. 하지만 각 부스트 컨버터의 동작으로 손실이 증가하는 단점이 있다. 본 논문에서는 DC링크의 전압을 각 패널 중 가장 높은 전압과 일치시켜, 부스트 컨버터의 동작 없이 인버터의 DC링크 전압 제어를 통해 MPPT를 수행하는 방법을 제안한다. 또한 기존의 방식과 비교를 통해 효율을 분석하고 이를 모의실험을 통해 검증한다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.360-361
• /
• 2018

현재 건설 중장비에는 암전류에 의한 배터리 방전 문제가 발생하고 있고 이에 태양광 충전 시스템을 필요로 한다. 본 논문에서는 6톤급 중장비에 적용 가능한 태양광 컨버터 개발에 대한 내용을 다루며 태양전지의 용량 선정, MPPT 적합성 검토, 독립형 충전 시스템 구현, 배터리 방전 방지 기능의 실효성을 확인한다. PSIM 시뮬레이션을 통해 MPPT 및 충전 로직을 검증하고 실험을 통해 40W급 충전 시스템의 P&O 알고리즘 성능을 확인한다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1356-1358
• /
• 2003

This paper describes the control of grid connected transformerless type PV power conditioning system, which is simple and more efficient than the usual transformer type system. With the modeling and analysis of power system, the validity of control strategy is well verified through the simulation and experimental results.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.449-450
• /
• 2014

풍력 발전 시스템은 풍력 터빈이 바람에 의해 회전함으로써 발전이 된다. 실험실에서 풍력 발전 시스템을 연구하기 위해서는 바람이 하는 역할을 별도의 모터를 사용하여 회전시켜 주어야 하는데 본 논문에서는 유도전동기의 직접 토크 제어를 이용하여 풍속 데이터를 가지고 상응하는 토크의 지령치로 환산하여 풍력 에너지를 모델링 하였다. 이렇게 발전된 에너지를 최대의 효율로 전달하기 위해서는 MPPT기능이 수행되어야 하며 별도의 센서가 필요없는 Fuzzy MPPT를 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1714-1716
• /
• 2005

본 논문은 독립형 시스템에 태양광을 집적하기위하여 최대출력점추적기를 적용한 새로운 제어방법을 제시한다. PV 판넬로부터 하나의 변수만을 시스템에 대한 제어변수로서 이용한다. 제안한 방법은 전압, 전류의 명확한 결과를 적용하지 않고 최대 전력점을 계산할 수 있다. 제안된 시스템에 대한 전력회로는 동기정류기를 가지는 승압형 컨버터이다.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.229-233
• /
• 2007

This paper presents the performance of PV(Photovoltaic) system, the design of MPPT(Maximum Power Point Tracker). Output of PV power system is DC, and PV power system is linked to the DC bus. The current(I)-voltage(V) output characteristic of PV cells changes with solar irradiance and cell temperature as parameters. As various PV modules respond differently to each of the parameters cited above. Maximum output of PV modules am be achieved by MPPT(Maximum Power Point Tracker) algorithm This paper includes a discussion on the performance of PV module, MPPT algorithm and the influence of PV module angle.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.135-139
• /
• 2012

A digital controller can simply realize a complex operation algorithm and power control process which can not be applied by an analog circuit for a solar array regulator(SAR). The digital resistive control(DRC) makes an equivalent input impedance of the SAR be resistive characteristic. The resistance of the solar array varies largely in a voltage source region and slightly in a current source region. Therefore when the solar array regulator is controlled by the DRC, the Advanced Incremental Conductance MPPT Algorithm with a Variable Step Size(AIC-MPPT-VSS) is suitable. The AIC-MPPT-VSS, however, using small signal resistance and large signal resistance of the solar array can not limit the absolute value of the solar array power. In this paper, the solar array power limiter is suggested and the BUCK-BOOST type SAR which is fully controlled by the digital controller is verified by simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.21-29
• /
• 2010

Generally, wind industry has been oriented to large power systems which require large windy areas and often need to overcome environment restrictions. However, small-scale wind turbines are closer to the consumers and have a large market potential, and much more efforts are required to become economically attractive. In this paper, a prototype of a small-scale urban wind generation system for battery charging application is described and a fuzzy logic based MPPT(Maximum Power Point Tracking) algorithm which can be effectively applied to urban wind turbine system is proposed. Through Matlab based simulation studies and actual implementation using DSP of the proposed algorithm, the feasibility of the proposed scheme is verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5310-5316
• /
• 2013

Maximum Power Point Tracking (MPPT) method for Photovoltaic (PV) system is implemented in PV inveter and it generate the maximum electric power from PV cell. MPPT method has been studied to have high efficiency and high tracking speed. However, these studies are basically focused on the performance under fixed irradiance condition. Based on the typical Perturbation and Observation (P&O) method, this paper presents the research results on modified P&O method to have a better performance under varying irradiance condition. The modified P&O method can have a better performance under varying irradiance condition because the additional measurements during the MPPT control period are conducted. The proposed MPPT method is verified by using 250kW PV inverter under linearly varying irradiance condition according to EN 50530.