• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.125-132
• /
• 2002

This paper shows an experimental magnetic levitation table using one degree-of-freedom active control. The magnetic levitation table using repulsions of permanent magnets was theoretically presented already. Thus the objective of this paper is to prove stable levitation with only one degree-of-freedom active control experimentally. For the design of the system, at first, permanent magnets are selected. Secondly, the spring constants of the virtual spring are obtained by simulation. Thirdly, the moving magnets are arranged using a stable layout relation. Fourthly, a linear voice coil motor is designed. Finally, the magnetic levitation system is manufactured. The phenomenon of stable levitation in the manufactured table is proven by means of dynamic time and frequency responses. The differences between the theoretical natural frequencies and experimental ones are analyzed. Also, stable range in the control direction is shown experimentally.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.48-54
• /
• 2002

This paper is described the indirect induction heated boiler and induction heated hot air producer using the voltage-fed series resonant high-frequency inverter which can operate in the frequency range from 20 kHz to 50 kHz. A specially designed induction heater is composed of laminated stainless plates, which have many tiny holes and are interconnected by spot welding. This heater is inserted into the ceramic type vessel with external working coil. This working coil is connected to the inverter and turbulence fluid through this induction heater to moving fluid generates in the vessel. The operating performances of this unique appliance in next generation and its effectiveness are evaluated and discussed from a practical point of view.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.52-56
• /
• 2011

The ongoing Superconducting Fault Current Limiter(SFCL) development mainly has focused on the application of commercializaton and power system through combining with normal-conducting device, moving away from current-limiting method, which is solely dependant on the existing superconductor. Compared to the structural development above, on the other hand, the research on applying superconducting current-limiting element to SFCL, the heart of SFCL, still has a lot left to do, apart form traditional resistive type SFCL. In this study, we looked into the current limiting characteristic of SFCL using core and coil. YBCO coated conductor with stainless steel stabilizer layer was verified by the excellent of current-limiting element of the resistive type SFCL that has a high Jc and index as well as being superior in mechanical property. Also, we study temperature characteristics and resistance characteristics, max voltage, response time and current-limiting ability that can be an indicator as current-limiting element while applying to superconducting current-limiting element caused by variation of winding direction, winding ratio of SFCL using core and coil.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.964-966
• /
• 2002

This paper presents a magnet circuit design procedure to reduce mover mass of the moving coil type linear direct motor (LDM). The procedure of optimization is based on the response surface methodology (RSM) and Sequential Quadratic Problem (SQP). This procedure of optimization is verified by the comparison of the result of the initial design between the result of the optimum design.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.116-118
• /
• 2007

In this paper, the notch of teeth, the shape changing and skew of permanent magnet are used to reduce the detent force. And addition, overhang of permanent magnet is applied to increase thrust because thrust is decreased by skew. As the results, detent force is decrease greatly about 98(%). And, the ripple ratio of thrust is decreased from 11.34(%) to 0.25(%).

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.771-773
• /
• 2001

In this paper, three dimensional Equivalent Magnetic Circuit Method(3-D EMCN method) a numerical analysis method which supplements to magnetic equivalent circuit adding numerical technique, is proposed for analysis Optical Pickup Actuator. (3) This method provides better characteristics both in precision of the analysis and in computation time than other analysis method such as three-dimensional Finite Element Method. We choose the simple 2-magnet moving coil type pickup actuator model and verify upper yoke effect using this method.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.3
• /
• pp.97-103
• /
• 1995

In this paper, for fuzzy control of linear servo system using the moving coil type linear DC motor, we propose a new fuzzy control method using parameter tuning for membership functions. A proposed fuzzy control method tunes parameters of membership function to have an appropriate control input signal for system when error exceeds predefined value and makes an inference using conventional fuzzy control rules when error reduces to a predefined value. To verify usefulness of a proposed fuzzy control method, making simulation and experiment, we compare with characteristics for conventional fuzzy control method.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.281-284
• /
• 2002

This paper describes the initial angle adjustment method on Hall Sensorless Linear Permanent Magnet Synchronous Motor The implementation of the controller is designed on the DSP TMS320C32 board. PMLSM is operated by using 4-point absolute positions profile with each velocity, acceleration and deceleration. To achieve Hall Sensorless characteristics, Moving Coil Type PMLSM is used and initial angle adjustment algorithm is adapted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.1
• /
• pp.43-47
• /
• 1980

The author designed and tested the high sensitive three-phase power factor meter and relay circuit, and dealt with the circuit to detect the phase of the current and the voltage. An operational amplifier comparator circuit and two single-phase transformers are used to control and detect the phase angle between the current and the voltage. The results obtained are as follows: 1. Converting the sine wave input current into the constant amplitude rectangular wave form by using a transistor chopper circuit, the power factor can be measured precisely over the load current of 0.08 A. 2. Using the moving coil type current meter, the power factor meter can be read in uniform . scale all over the range. 3. Using the three-phase power factor meter, the power factor relay which works at any power factor can be made.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.145-147
• /
• 1999

A voice type Moving Coil Linear Oscillatory Actuator(MC-LOA) has unbalanced magnetic circuit structure. Its asymmetric magnetic flux distribution along the mover directions causes shifting of displacement center to one side. Therefore, this paper analyzes both thrust and displacement characteristics and settles the unbalanced flux problem by performing shape optimization. The propriety of the improved design model has been verified by dynamic analysis based on the coupling of kinetic and electric equations.