• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.319-326
• /
• 2000

It is investigated character of the dynamic behavior at over excavation zone of roadbed using crushed stone instead of lean concrete. It is considered that behavior of roadbed using PENTAGON-3D and Baber's equation. Typical load of sine wave type using impact factor is compared to moving load system to examine relationship in using PENTAGON-3D case. Variations of this paper are material properties of roadbed, train velocity, subgrade bearing capacity. Using variations, safety of roadbed is estimated by dynamic behavior character.

• 대한토목학회논문집
• /
• 제9권3호
• /
• pp.1-12
• /
• 1989

사장교는 경간이 크기 때문에 발생하는 대변형 효과, 케이블의 현수 작용, 그리고 축력으로 인한 휨 강성 변화 등으로 비선형 거동이 나타난다. 사장교의 동적 거동은 구조물 안정성 검사를 위한 중요한 요소가 된다. 특히, 편재 이동하중이 작용하는 경우, 연직 변위와 비틂 변위는 복합될 뿐만 아니라 단면 좌우의 케이블 축력 변화도 중요한 동적 특성을 나타낸다. 본 연구에서는 편재 이동하중이 작용하는 사장교의 해석을 위한 이론적 연구와 유한 요소법을 제시하였고 이동 하중의 속도변화와 편심량의 크기에 따라 케이블의 장력과 절점 변위에 대한 동적 거동을 규명하였다. 본 연구에서 수행한 해석 결과에 따르면, 편재 이동 하중을 받는 사장교의 해석에서는 주형의 비틂과 이로 인한 케이블 축력 증가도 고려해야 할 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.45-59
• /
• 2018

The bi-material elastic system consisting of the pre-stressed hollow cylinder and pre-stresses surrounding infinite elastic medium is considered and it is assumed that the mentioned initial stresses in this system are caused with the compressing or stretching uniformly distributed normal forces acting at infinity in the direction which is parallel to the cylinder's axis. Moreover, it is assumed that on the internal surface of the cylinder the ring load which moves with constant velocity acts and within these frameworks it is required to determine the influence of the aforementioned initial stresses on the critical velocity of the moving load. The corresponding investigations are carried out within the framework of the so-called three-dimensional linearized theory of elastic waves in initially stresses bodies and the axisymmetric stress-strain state case is considered. The "moving coordinate system" method is used and the Fourier transform is employed for solution to the formulated mathematical problem and Fourier transformation of the sought values are determined analytically. However, the originals of those are determined numerically with the use of the Sommerfeld contour method. The critical velocity is determined from the criterion, according to which, the magnitudes of the absolute values of the stresses and displacements caused with the moving load approaches an infinity. Numerical results on the influence of the initial stresses on the critical velocity and interface normal and shear stresses are presented and discussed. In particular, it is established that the initial stretching (compressing) of the constituents of the system under consideration causes a decrease (an increase) in the values of the critical velocity.

• 오토저널
• /
• 제3권1호
• /
• pp.54-60
• /
• 1981

This paper presents the dynamic behaviour of a simple beam subjected to moving loads and prebending moments. The velocity of the moving loads is assumed constant, and the prebending moment is assumed to be M. The fundamental equation of motion of the beam is derived from the principle of virtual works and solved by using Duhamel's Integral. In this paper we found that the dimensionless deflection at the middle of beam was related with prebending moment(M), velocity(V) and magnitude of the moving load(F) ; that is y/y$_{0}$=1/1-.betha.$^{2}$-.pi.M/Fl The faster the velocity becomes, the deeper the maximum deflection becomes. And the maximum deflection at the middle of beam was occurred after the moving load passed the midpoint of beam.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.552-559
• /
• 2009

Most damage identification methods for structural health monitoring developed to date utilize modal domain responses which require postprocessing and inevitably contain errors in transforming the domain of responses. In this paper, the feasibility of a damage identification method based on dynamics responses from moving loads is experimentally verified. The experiment is performed via applying periodic and non-periodic moving loads to a steel beam and acceleration and displacement responses of the beam is measured. The moving loads is applied using steel balls and the damage of a structure is simulated by saw-cutting the beam. The damage identification results using the measured responses show that the moving load response based damage identification method successfully identify all damages in the beam.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.131-138
• /
• 1997

The equivalent vehicle load factors which can consider the concentrated wheel load effect in slab design of parking garage structure are proposed. Based on the standard vehicle with total weight of 2.4 ton which is designed through the investigation of small to medium vehicle produced in Korea and the review of numerous foreign design codes for parking garage structure, the effects of moving vehicle loads on slab are analyzed using the finite element method. Besides. the relationships between the equivalent load factors and the sectional dimensions are established by regression analysis. The calculation of design forces can be easily accomplished without taking sophisticated numerical analysis for the moving vehicle load as the results obtained to the distributed load are multiplied by the proposed load factors in practice.

• 한국공간구조학회논문집
• /
• 제22권1호
• /
• pp.67-73
• /
• 2022

Middle size of membrane retractable roof is under 25m span which consists of various moving systems. Sliding carriage is the system that leads the membrane to parking place, transferring the load from the membrane to structural cable. When membrane moves roof, thus, structural behavior of sliding carriage, which may contain various shapes with friction coefficients, should be investigated by vertical load as well as horizontal load. Nummerical simulation of sliding carriage prototypes, in this research, were performed by incrementation of vertical load and horizontal load as well. Consequently, this paper evaluated proper shapes of inner holder of Sliding carriage and evaluated the effective contact area of inner hold.

• 대한토목학회논문집
• /
• 제2권3호
• /
• pp.15-22
• /
• 1982

이 연구(硏究)는 이동하중(移動荷重)과 축하중(軸荷重)이 작용(作用)하는 무한(無限)보에 휨모멘트를 해석(解析)하고 공진선도(共振線圖)를 나타낸다. 하중(荷重)과 함께 이동(移動)하는 좌표계(座標系)에서 정상해(定常解)를 구하였다. 지지(支持)된 기초(基礎)는 감쇠(減衰)를 포함하였고 축하중(軸荷重)과 감쇠(減衰)와 이동하중속도(移動荷重速度)가 보의 응답(應答)에 미치는 영향(影響)을 연구(硏究)하였다. 비감표(非減表)와 임계감표(臨界減表)의 경우에 대하여도 연구(硏究)하였다. 몇몇의 이동하중속도변수(移動荷重速度變數), 축하중변수(軸荷重變數), 감표변수(減表變數)에 따른 보의 휨모멘트 윤곽(輪廓)이 도표(圖表)로 나타내졌다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.190-198
• /
• 2011

프리캐스트 콘크리트제품은 빠른 시공, 노동력 절감, 높은 품질확보의 장점을 가지고 있어 옹벽구조물 분야에도 많이 적용하고 있다. 본 논문에서는 철도에 적용되는 프리캐스트 프리스트레스트로 제작된 옹벽의 동적안정성을 평가하기 위하여 이동열차 하중 재하상태에서의 수치해석을 수행하였다. 해석에는 2차원 유한요소 해석이 적용되었다. 궤도에 작용하는 이동열차하중은 이동하중에 대한 충격력을 대표하는 조도성분의 위상각 자료와 열차자중을 대표하는 준정적 하중을 조합하여 사용하였다. 해석에는 노반과 옹벽구조물의 시간영역 변위, 응력, 가속도 결과값을 이용하여 옹벽의 동적안정성을 평가하였으며, 평가결과 충분한 적용성을 확인하였다.

• Steel and Composite Structures
• /
• 제42권6호
• /
• pp.805-826
• /
• 2022

The free and live load-forced vibration behaviour of porous functionally graded (PFG) higher order nanobeams in the thermal and magnetic fields is investigated comprehensively through this work in the framework of nonlocal strain gradient theory (NLSGT). The porosity effects on the dynamic behaviour of FG nanobeams is investigated using four different porosity distribution models. These models are exploited; uniform, symmetrical, condensed upward, and condensed downward distributions. The material characteristics gradation in the thickness direction is estimated using the power-law. The magnetic field effect is incorporated using Maxwell's equations. The third order shear deformation beam theory is adopted to incorporate the shear deformation effect. The Hamilton principle is adopted to derive the coupled thermomagnetic dynamic equations of motion of the whole system and the associated boundary conditions. Navier method is used to derive the analytical solution of the governing equations. The developed methodology is verified and compared with the available results in the literature and good agreement is observed. Parametric studies are conducted to show effects of porosity parameter; porosity distribution, temperature rise, magnetic field intensity, material gradation index, non-classical parameters, and the applied moving load velocity on the vibration behavior of nanobeams. It has been showed that all the analyzed conditions have significant effects on the dynamic behavior of the nanobeams. Additionally, it has been observed that the negative effects of moving load, porosity and thermal load on the nanobeam dynamics can be reduced by the effect of the force induced from the directed magnetic field or can be kept within certain desired design limits by controlling the intensity of the magnetic field.