• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.31-37
• /
• 2011

For the domestic glasses industry to procure competitiveness in the world CA(Cellulose Acetate) frame of spectacles market, CNC machining system for CA frame including high-value added CA cutting technologies should be developed with new materials for the rim based on Cellulose and sheet manufacturing base. The spindle system of glasses frame equipment that is the core to the quality of CA frame is the key technologies to realize high-speed, high-precision so its importance is remarkably emerging. In the study, at the structural design of the high spindle system of the private equipment for CA glasses frame embedded a motor of 40,000rpm, the stability of design was analyzed and investigated through selecting lubrication structure and thermal characteristics of the spindle system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.494-497
• /
• 2003

A rotating device driven by an Inchworm motor was designed and fabricated to be used as an angie standard system. 1. PZT was adopted as a driving source, while the movement of PZT was guided by the leaf spring employing the elastic transformation of metals. 2. The device could rotate in a 360-degree arc. continuously Performance test of the device showed about 0.02 sec. of the minimum revolution angle and 1/15 rpm of the maimum revolution speed. 3. To improve its performance requires further studies on realizing a shifting device with faster response time, on increasing the output current (capacity) of the power amplifier used to drive PZT, on the dynamic motion of clamping. and on determining the optimum clamping condition

• ALGAE
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2005

Agar was extracted from Gelidium amansii, which was harvested at the shores of Jeju Island in South Korea. As a unique solvent, the ability of dimethyl sulfoxide (DMSO) was used to separate agarose from agar by removing agaropectine and quality of the resultant agarose was characterized for chromatography purposes. Agar sample was agitated by motor-driven stirrer with DMSO in a water bath (at 70$^{\circ}C$ for 2 h) and centrifuged (3,000 rpm for 20 min). Resultant upper agarose layer was gelled, washed, dried and milled. The quality of agarose was evaluated by the analysis of proximate chemical composition, sulfate content, gelling strength and DNA migration. In this study, the separated agarose showed low sulfate amount (0.28%) and showed high gel strength (1190 g ${\cdot}\;cm^{-2}$). The resolution power and the ligase activities gave clear picture about the suitability of the present agarose for practical purposes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1964-1971
• /
• 1995

In the present study, the performance characteristics of a centrifugal air compressor were investigated experimentally. The PC controlled performance test facility for a centrifugal air compressor driven by an electric motor with a gear box to achieve higher compressor rotating speed was set up in the present study. The performance test for a turbocharger compressor of a diesel engine was conducted, and in a case of 34,800 rpm, pressure ratio 1.18, flow rate 0.09kg/s, compressor efficiency 61% were investigated. Adiabatic power for a tested compressor showed maximum value at mass flow ratio 0.8. The value of mass flow ratio of maximum efficiency was about 0.37, it was independent of compressor rotating speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.58-64
• /
• 2001

An investigation of the TMR(Track Misregistration) requirements to achieve the capacity of 80GBytes／Platter in 7200rpm disk drive system is reported. This paper also gives an overview of the PES(Position Error Signal) characteristics in the 57,500TPI disk drive to estimate the required 95,000TPI-system PES. The TMR measured by PES are presented and decomposed in order to identify the portions and their contributions of the spindle-disk system vibration and HSA(Head-Stack-Assembly) system vibration respectively. A comprehensive review on the servo system is also presented to provide the practical limits of the modem servo architecture into TMR budget design. The decomposed PES energy distribution shows that the spindle-disk pack vibration is one of the top-ranking sources of the total TMR budget and its percentage contribution is about 50％ considering all the other TMR sources.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.211-215
• /
• 2000

Bi-2212 HTS tube was fabricated by CFP(Centrifugal Forming Process). Slury was prepared in the mixing ratio of 8:2 between powder and binder and ball-milled for 24 hrs. Slurry was initially charged into the rotating mold with 300${\sim}$450 rpm and heated at the temperature ranges of 840${\sim}$860$^{\circ}$C for partial melting to finally obtain a uniformly textured tube shape. It was observed the plate-like grains with more than 20 ${\mu}$m were well oriented along the rotating axis and the measured T$_c$ was around 67K. In this paper we will discuss and analyze the tube characteristics depending on many different processing parameters such as, powder composition, binder mixing ratio between powder and binder, motor speed, heating temperature and etc.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.69-76
• /
• 2009

This paper describes sensorless high-speed control for 45,000rpm/22kw type PMSM by using iterative adaptive sliding mode observer. The proposed algorithm is based on sensorless vector control by on-line estimating the speed of rotor in the wide speed operating range between the starting operation. In addition, it shows the enhanced performance of the iterative adaptive observer by lessening its chattering and getting stable response in limited PWM period. The simulation and experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.163-167
• /
• 2003

본 논문에서는 PWM 펄스를 랜덤하게 위치시킬 수 있는 새로운 3상 공간벡터 RPWM (Random PWM) 기법을 제안하고 있다. 기존의 RPWM 방식과 달리 SVPWM에 의해 발생된 PWM 펄스를 랜덤하게 위치시키는 원리를 각 섹터마다 달리 적용하여 쉽게 RPWM을 구현하는 기법을 제안한다. 제안된 기법의 타당성 검증을 위하여, 제안된 RPWM (Random PWM) 기법 알고리즘에 대해 DSP를 이용한 IGBT 인버터 구성에 의한 실험을 수행하였다. 이에 대한 결과 중, 특히 10000 rpm 이상의 고속운전특성에서의 인버터 출력 전압 및 전류의 고조파 스펙트럼을 넓은 주파수 영역으로 고루 분산시켜 제안된 RPWM의 특정고조파의 저감효과를 입증하고자 한다

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.168-172
• /
• 2003

본 논문에서는 고주파 스위칭 시 스위칭 손실의 감소, 구현의 용이성 및 인버터 제어를 위하여 요구되는 연산시간 감소 등 다양한 장점을 가진 2-LEG 인버터를 대상으로, 새로운 RPWM(Random PWM) 기법에 의한 3상유도전동기 구동 방식에 대하여 서술한다. 기존의 RPWM 방식과 비교하여 제안한 RPWM 기법으로부터, 10000(rpm) 이상의 고속운전 영역에서의 인버터 출력전류의 고조파 스펙트럼을 넓은 주파수 영역으로(특정주파수의 side band) 고루 분산시켜 RPWM의 고조파 저감효과에 대한 우수성을 입증하고자 한다. 이러한 과정에서 제안된 RPWM 기법을 적용한 알고리즘에 대하여 DSP를 이용한 IGBT 인버터에 의한 실험을 수행하여, 이로부터 그 결과를 검토하여 제안된 기법의 타당성을 검증하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.173-177
• /
• 2003

본 논문에서는 RPWM(Random PWM) 방식을 사용한 3상 유도전동기 구동 시스템의 스위칭 주파수 가변에 따른 구동 특성을 비교 분석하고자 한다. 기존의 RPWM 방식과 본 논문에서 제안한 RPWM 기법을 이용하여 스위칭 주파수 가변에 따른 $M_f$ 변화에 대한 구동특성을 비교 분석하고, 특히 10000[rpm] 이상의 고속운전특성에서의 인버터 출력 전압 및 전류의 고조파 저감효과를 제안된 기법으로부터 확인할 수 있다. 이러한 과정에서는 제안된 RPWM 기법 알고리즘에 대한 타당성 검증을 위해 DSP를 이용한 IGBT 인버터로부터 개별 스위칭 주파수별 실험을 하고, 그 결과의 취득으로부터 스위칭 주파수별 운전 특성을 분석하고자 한다.