• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.438-439
• /
• 2010

Compressor의 개발 동향은 높은 에너지 효율과 넓은 운전영역의 특성을 갖는 방향으로 성장해 왔다. 특히 기존의 AC Motor를 DC Motor로 대체함으로써 더 높은 효율을 얻을 수 있게 되었다. 본 논문은 압축기의 핵심 부품인 30hp급 용량에 92%의 효율과 3800RPM 가변속 운전이 가능한 BLDC Motor를 맥스웰을 이용하여 시뮬레이션하고 실제 제작을 통해 효율과 가변속 운전을 실험하였다.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.670-677
• /
• 2005

In this study, we analyzed the three dimensional unsteady flow field around the motor cooling fan using the unsteady lifting surface theory. We obtained the flow rate for various geometries of fan from the calculated results of velocity field. For the data of design parameter and rotating speed(rpm) of the fan, we can predict the flow rate of the motor cooling fan with thin thickness through numerical analysis without the experimental data of the free stream velocity which is a boundary condition of flow field. the numerical results showed the flow rate within 10% of error in comparison with experimental results. The radial fans, which are often used as internal motor fan were also investigated with the same procedure.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.109-112
• /
• 2001

In this paper, the development of the prototype electric vehicle for golf car is described. A brushless dc (BLDC) motor is applied as a prime mover. The BLDC motor is coupled directly to the reduction and differential gear system. The output power of the motor is decided to 2.2Kw at 3000 rpm, which is a general value of the golf car on the market today. The motor is driven by the microprocessor-based 3-phase PWM inverter system. We introduce the performance and functions of the BLDC motor and it's control system.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.85-90
• /
• 2005

In this study, we have fabricated a three branches vertical Hall sensor for detecting three phases rotation informations of miniaturized brushless motor. The sensor gives three position signals phase shifted by $120^{\circ}$, corresponding to the motor driving signals. The branch has one Hall output and one input each other. The central part acts as common driving input. Sensor has branch width of $150{\mu}m$ and distance from central electrode to Hall electrode of $100{\mu}m$. The sensitivity of sensor is 250 V/$A{\cdot}T$ at magnetic field of 0.1 T. It has also showed three sine waves of Hall voltages with $120^{\circ}$ phase over a $360^{\circ}$ rotation. A packaged sensing part are $2{\times}2mm^{2}$ and has been successfully tested on a motor rotation at a speed up to 60,000 rpm.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.475-480
• /
• 2006

In this paper, a new approach for detecting broken rotor bars in a squirrel-cage induction motor is proposed. The air-gap flux variation analysis was done using search coils inserted in stator slots when broken rotor bar occurs. An accurate modeling and analysis of air-gap flux variation in the induction motor are developed using finite-element (FE) software packages, and measurement of the flux are made using search coils. The simulation was done for the induction motor with 380 [V], 5 [HP], 4 Poles, 1,742 [rpm] ratings using the commercial FE analysis tool. The simulation and experiment results can be useful for detecting the broken rotor bar of an induction motor.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.512-513
• /
• 2012

The electric motor is essential to drive turbo machinery. In order to overcome the speed limitations of general motors, the inverter is used to perform high speed to tens of rpm. The high speed drives are widely used in many applications such as turbo blower, turbo centrifugal compressors, and pump using air bearing technique. Starting of high speed motor can cause step out, stall, oscillation of motor because the phase inductance is much smaller than that of ordinary motor. This paper studied on the starting characteristic of variable speed centrifugal chiller considering high speed motor characteristics. Finally, the superiority of the inverter is verified by experimental results.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1041-1042
• /
• 2007

This paper proposes a new method for detecting broken rotor bars in a squirrel-cage induction motor. The air-gap flux variation analysis was done using search coils inserted in stator slots when broken rotor bar occurs. An accurate modeling and analysis of air-gap flux variation in the induction motor are developed using finite-element (FE) software packages, and measurement of the flux are made using search coils. The simulation was done for the induction motor with 380 [V], 7.5 [kW], 4 Poles, 1,760 [rpm] ratings using the commercial FE analysis tool. The simulation and experiment results can be useful for detecting the broken rotor bar of an induction motor.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.798_799
• /
• 2009

초고속 전동기는 일반적인 회전수를 초고속 전동기로서 기존 전동기보다 여러 가지 장점을 가지고 있어 그 수요가 늘어나고 있는 실정이다. 본 논문에서는 15 [kW], 120,000 [rpm]의 초고속 전동기를 제작하기 위한 기초설계단계에서 계산된 내용과 형상을 알아보고 그 가능성을 타진해 본 내용이다. 본 연구에서는 영구자석을 사용한 초고속 전동기로서 해석과 설계과정을 거치면서 로터의 직경을 계산하고 구동 드라이버설계제작 및 사용할 영구자석과 코어을 제작하여 고소속 전동기를 제작하고 제작된 전동기를 조립하여 그 특성을 평가하는 순서로 개발을 완료하고자 하였다. 본 논문에서는 이러한 내용 중 FEM 설계 과정을 소개하고 그 가능성에 대해서 알아보았다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.746-747
• /
• 2008

초고속 전동기는 일반적인 회전수를 초고속 전동기로서 기존 전동기보다 여러 가지 장점을 가지고 있어 그 수요가 늘어나고 있는 실정이다. 본 논문에서는 15kW, 120,000rpm의 초고속 전동기를 제작하기 위한 기초설계단계에서 계산된 내용과 형상을 알아보고 그 가능성을 타진해 본 내용이다. 본 연구에서는 영구자석을 사용한 초고속 전동기로서 해석과 설계과정을 거치면서 로터의 직경을 계산하고 구동 드라이버 설계제작 및 사용할 영구자석과 코어을 제작하여 고소속 전동기를 제작하고 제작된 전동기를 조립하여 그 특성을 평가하는 순서로 개발을 완료하고자 하였다. 본 논문에서는 이러한 내용중 FEM 설계 과정을 소개하고 그 가능성에 대해서 알아보았다.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2023-2026
• /
• 2002

This paper explains the study of controller design applied to SRM(Switched Reluctance Motor) concept. This controller executes controller algorithms via ${\mu}$-processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal. During initial period, SRM controller was designed to control .respective target RPM (Revolution per minutes) and PR (Proportional Integral Differential) coming from the PC(Personal Computer) monitor program, and receiving clockwise and counter-clockwise rotation signal and target RPM coming from the front panel, and receiving the location of rotational element and RPM generating from the position censor during activation period.