• ETRI Journal
• /
• 제27권6호
• /
• pp.814-817
• /
• 2005

Fast binary dilation and erosion algorithms using run-length encoding (RLE) are proposed. RLE is an alternative way of representing a binary image using a run, which is a sequence of '1' pixels. First, we derive the run-based representation of dilation and erosion and then present the full steps of the proposed algorithms in detail.

• Journal of Biosystems Engineering
• /
• 제14권3호
• /
• pp.188-195
• /
• 1989

컴퓨터 화상처리(畵像處理)에 의한 묘목(苗木)의 형태학적 성질을 측정하기 위하여 화상포착방법과 화상처리 기술 및 관련 연산법을 개발하였다. 이러한 방법에 의한 측정결과를 기존의 측정방법에 의한 측정결과와 비교하여 그 정밀도(精密度)를 분석(分析)하였으며, 컴퓨터 화상(畵像)에 의한 측정방법의 장점을 고찰하였다.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.289-296
• /
• 2010

The effect of organic additives, thiourea (TU), on the copper electroplated layer of large rectangular size was investigated through physical and various electrochemical techniques. It was found that TU had strong adsorption characteristics on the Ni substrate and affected the initial electroplating process by inducing surface reaction instead of mass transfer in the bulk solution. TU additives had its critical micelle concentration at 200 ppm in copper sulphate solution and showed abrupt change in morphological and electrochemical impedance spectroscopic results around this concentration, which could be related with the destruction of adsorption structure of TU-Cu(I) complex formed at the Ni substrate surface. By conducting a commercial electroplating simulation, when TU additives was included at cmc in the plating solution, it acted as a depolarizer for copper electrodeposition and was effective to reduce the unevenness of copper deposits between centre and edge region at high current densities of 10 ASD.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.309-314
• /
• 2018

Size reduction is an important pre-processing operation for utilizing biomass as a sustainable resource in industrial-scale energy production and as a raw material for other industries. This work investigates the size reduction characteristics of air-dried Miscanthus sacchariflorus Goedae-Uksae 1 (Amur silver grass) via image processing and identifies the morphological characteristics of comminuted and screened M. sacchariflorus. At chopping lengths of 18, 40, 80, and 160 mm, 81%, 77%, 78%, and 76% of the particles, respectively, passed through a 4-mm sieve. Even a knife mill with a very small screen aperture (>1 mm) admitted over 10% of the particles. The average circularity and aspect ratio of the particles were <0.30 and >10, respectively. These results confirm that in all preparation modes, most M. sacchariflorus particles were needle-like in shape, irrespective of the type of preparation.

• 한국콘텐츠학회논문지
• /
• 제14권3호
• /
• pp.40-51
• /
• 2014

문서 저작권에 대한 관심과 중요성이 높아짐에 따라 문서 복제나 표절의 검출에 대한 필요성이 증대되고 있다. 이와 같은 이유로 많은 연구가 이루어지고 있으나 자연어 처리기술의 한계가 있어 문서의 심층적 표절 검출에 어려움이 있다. 본 논문은 자연어 분석의 기술을 적용한 유사문서 판별기를 설계, 구현한다. 이 시스템은 형태소 분석의 기술과 함께 구문의미 분석의 기술, 저빈도 및 관용표현 가중치을 이용하여 유사문서를 판별한다. 본 시스템의 성능을 실험하기 위하여 휴먼 판별과 기존 시스템, 그리고 휴먼 판별과 제안한 시스템의 판별과의 상관계수를 분석하였다. 실험결과, 구문의미 분석을 활용한 시스템의 개선점을 발견할 수 있었다. 앞으로 문서 유형을 정의하고 각 유형에 맞는 판별 기법을 개발할 필요가 있다.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1683-1689
• /
• 2014

In this paper, we propose an image processing based time-frequency domain reflectometry(TFDR) in order to estimate the fault location of a cable. The Wigner-Ville distribution is used for analysis in both the time domain and the frequency domain when the conventional TFDR estimates the fault location in a cable. However, the Winger-Ville distribution is a bi-linear function, and hence the cross-term is occurred. The conventional TFDR cannot estimate the accurate fault location due to the cross-term in case the fault location is close to the position where the reference signal is applied to the cable. The proposed method can reduce the cross-term effectively using binarization and morphological image processing, and can estimate the fault location more accurately using the template matching based cross correlation compared to the conventional TFDR. To prove the performance of the proposed method, the actual experiments are carried out in some cases.

• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.820-825
• /
• 1999

A bacterial strain WN9, which produced a new type of extracellular polysaccharide, was isolated from soil samples. By morphological, physiological, biochemical, and phylogenetic studies, strain WN9 was identified as a Paenibacillus sp. and it was named as Paenibacillus sp. WN9, which produced a high molecular extracellular polysaccharide from glucose. The molecular weight of the exopolysaccharide (EPS-WN9) was estimated to be about 31.5 mega-Da. The FT-IR spectrum of EPS-WN9 revealed typical characteristics of polysaccharides. EPS- WN9 consisted of D-glucose and D-mannose with a molar ratio of 1:1.4 being identified as a neutral sugar component. The acidic component of EPS- WN9 was tyrosine. Rheological analysis of EPS- WN9 revealed that the pseudoplastic property and its apparent viscosity remained stable at various temperatures and pHs.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.48-56
• /
• 2008

A real-time inspection system has been developed by combining CCD based image processing algorithm and a standard lighting equipment. The system was tested for defective fabrics showing nozzle contact scratch marks, which are one of the frequently occurring defects. Two algorithms used were compared according to both their processing time and detection rate. First algorithm (algorithm A) was based on morphological image processing such as dilation and opening for effective treatment of defective printing areas while second one (algorithm B) mainly employs well-defined edge detection technique based on canny detector and Zermike moment. It was concluded' that although both algorithms were quite successful, algorithm B showed relatively consistent performance than algorithm A in detecting complex patterns.

• 한국게임학회 논문지
• /
• 제19권5호
• /
• pp.103-114
• /
• 2019

온라인 커뮤니티 안에서 다른 사용자들의 글에 반응할 수 있는 딥러닝 연구를 2017년부터 진행해 왔으나, 한국어의 조사와 같은 특성으로 인한 단어처리의 어려움과 RNN 모델의 특성으로 인한 GPU 사용률 저조 문제로 인해 적은 양의 데이터로 학습을 제한해야 했다. 하지만 최근 자연어 처리 분야의 급격한 발전으로 이전보다 뛰어난 모델들이 등장함에 따라 본 연구에서는 이러한 발전된 모델을 적용해 더 나은 학습 결과를 생성해 내는 것을 목표로 한다. 이를 위해 셀프-어텐션 개념이 적용된 트랜스포머모델을 도입했고 여기에 한국어 형태소 분석기 MeCab을 적용해 단어처리의 어려움을 완화했다.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.381-386
• /
• 2018

In this study, plasma electrolytic oxidation (PEO) method was used to from anodic oxide films on Al alloy and their resistance and morphological characteristics were investigated as a function of film formation voltage and treatment time. Cross-sectional morphology and composition of the PEO films were analyzed by SEM (Scanning Electron Microscopy) and EDS (Energy Dispersive Spectroscopy). The PEO films showed increased surface roughness and thickness with of film formation voltage and treatment time. The wear resistance was found to be the best for the PEO film formed for 5 min at 500V which is attributed to be denser structure relatively and lower surface roughness.