• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.470-475
• /
• 2009

본 연구에서는 유화중합을 이용한 수분산성 아크릴계접착제의 최적의 합성조건을 구하기 위하여 주단량체로 2-EHA(2-ethylhexyl acrylate), n-BA(n-butyl acrylate), MMA(methyl metacrylate), 기능성단량체로 2-HEMA(2-hydroxylethylmethacrylate), AAc(acrylic acid), 유화제로는 음이온성 유화제인 SLS(Sodium Lauryl Sulfate), 그리고 개시제로 APS(Ammonium persulfate)를 사용하여 전환율, 입자 크기, 박리강도, 유리전이온도에 대한 유화제, 개시제, 단량체 함량의 영향을 고찰하였다. 반응온도 $82^{\circ}C$, 유화제(SLS/monomer) 3.75%, 개시제(APS/monomer) 0.612%에서 95% 이상의 전환율을 얻을 수 있었고, 유화제나 개시제의 양이 너무 많을 때는 박리접착강도가 감소하는 경향을 보였으며, 65% 2-EHA/monomer, 20% BA/monomer, 10% MMA/monomer에서 최대 전환율과 최대 박리접착강도를 얻을 수 있었다.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.360-368
• /
• 2003

Statement of Problem: The residual monomer of denture base materials causes hypersensitivity on oral mucosa and intereferes with the mechanical properties of the cured resin. The amount of residual monomer is influenced by materials, curing cycle, processing method, and etc. Purpose: The aim of this study was to investigate the residual methyl methacrylate(MMA) content of injection molded denture base polymer, and to compare this with the self-cured resin and the conventional compression molded heat-cured resin. Materials and Methods: Disc shaped test specimens (50mm in diameter and 3mm thick) were prepared in a conventional flasking technique with gypsum molding. One autopolymerized denture base resins (Vertex Sc. Dentimex. Netherlands) and two heat-cured denture base resins (Vertex RS. Dentimex. Netherlands, Ivocap. Ivoclar Vivadent, USA) were used. The three types of specimens were processed according to the manufacturer's instruction. After polymerization, all specimens were stored in the dark at room temperature for 7 days. There were 10 specimens in each of the test groups. 3-mm twist drills were used to obtain the resin samples and 650mg of the drilled sample were collected for each estimation. Gas chromatography (Agillent 6890 Plus Gas Chromatograph, Agillent Co, USA) was used to determine the residual MMA content of 10 test specimens of each three types of polymer. Results: The residual monomer content of injection molded denture base resins was $1.057{\pm}0.141%$. The residual monomer content of injection molded denture base resins was higher than that of compression molded heat cured resin ($0.867{\pm}0.169%$). However, there was no statistical significant difference between two groups (p>0.01). The level of residual monomer in self cured resin($3.675{\pm}0.791$) was higher than those of injection molded and compression molded heat cured resins (p<0.01). Conclusion: With respect to ISO specification pass / fail test (2.2% mass fraction) of residual monomer, injection molding technique($1.057{\pm}0.141%$) is a clinically useful and safe technique in terms of residual monomer.

• 한국식품과학회지
• /
• 제31권2호
• /
• pp.482-487
• /
• 1999

과요오드산으로 산화시킨 당을 유리아미노산과 반응시켜서 ${\alpha}-NH_2$기와 펩티딜리신의 ${\varepsilon}-NH_2$기와 반응하여 결합한 것을 확인하였다. 그래서, 제조한 과요드산-산화당은 단백질 분자 표면의 리신의 ${\varepsilon}-NH_2$기와 Schiff 염기 반응으로 공유결합하여 당단백질을 만드는 것으로 볼 수 있다. 과요드산 산화당으로 변형한 고구마 ${\beta}$-아밀라아제는 C, H는 증가, N은 감소하였다. N말단의 ${\alpha}-NH_2$기는 70% (pentamer), 73% (monomer), ${\varepsilon}-NH_2$기는 33% (pentamer), 26% (monomer)가 산화당과 반응하였다. 페놀-황산법에 의한 총당 정량과 DNP 법으로 분석한 결과, $IO_4$-산화말토헥사오스는 고구마 ${\beta}$-아밀라아제 1몰당 6몰이 결합된 것으로 나타났고, 고구마 ${\beta}$-아밀라아제에 결합된 산화가용성 전분은 효소단백질 대비 13.2% (monomer), 13.5% (pentamer), 산화말토헥사오스는 9.7% (pentamer), 9.3% (monomer)로 나타났다.

• Mass Spectrometry Letters
• /
• 제13권4호
• /
• pp.177-183
• /
• 2022

The monomer and dimer structures of the amyloid fragment Aβ(1-16) sequence formed in H₂O were investigated using electrospray ionization mass spectrometry (MS) and tandem MS (MS/MS). Aβ16 monomers and dimers were indicated by signals representing multiple proton adduct forms, [monomer+zH]ⁿ⁺ (=M^z+, z = charge state) and [dimer+zH]^z+ (=D^z+), in the MS spectrum. Fragment ions of monomers and dimers were observed using collision-induced dissociation MS/MS. Peptide bond dissociation was mostly observed in the D1-D7 and V11-K16 regions of the MS/MS spectra for the monomer (or dimer), regardless of the monomer (or dimer) charge state. Both covalent and non-covalent bond dissociation processes were indicated by the MS/MS results for the dimers. During the non-covalent bond dissociation process, the D³⁺ dimer complex was separated into two components: the M¹⁺ and M²⁺ subunits. During the covalent bond dissociation of the D³⁺ dimer complex, the b and y fragment ions attached to the monomer, (M+b_10-15)^z+ and (M+y_9-15)^z+, were thought to originate from the dissociation of the M²⁺ monomer component of the (M¹⁺+M²⁺) complex. Two different D³⁺ complex geometries exist; two distinguished interaction geometries resulting from interactions between the M¹⁺ monomer and two different regions of M²⁺ (the N-terminus and C-terminus) are proposed. Intricate fragmentation patterns were observed in the MS/MS spectrum of the D⁵⁺ complex. The complicated nature of the MS/MS spectrum is attributable to the coexistence of two D⁵⁺ configurations, (M¹⁺+M⁴⁺) and (M²⁺M³⁺), in the Aβ16 solution.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.210-211
• /
• 2006

A series of L-LA polymerizations initiated by $Sn(Oct)_{2}\;([LA]_{0}/[Sn]_{0}=200)$ were carried out in scR22 at $130^{\circ}C$ and 300 bar, where $[LA]_{0}$ is the initial L-lactide concentration and $[Sn]_{0}$ is the initial $Sn(Oct)_{2}$ concentration. The reaction time dependences of monomer conversion and PLLA MW improved. The monomer conversion and PLLA MW increased with increasing reaction time. The effect of temperature on monomer conversion and PLLA MW was investigated in a series of polymerizations conducted at temperatures ranging from 90 to $150^{\circ}C$ and at a constant pressure of 200 bar. In all of these experiments, the ratio of monomer to R22 concentration was held constant at 12.4 wt.-%. Increasing the reaction temperature from 90 to $130^{\circ}C$ resulted in increased monomer conversion from 11.5 to 72.2 %.

• Journal of Information Display
• /
• 제7권1호
• /
• pp.7-11
• /
• 2006

In this paper, we report the fabrication of high quality polymer walls by using a monomer containing fluorine (F-monomer). Polymer walls with no phase retardation were fabricated by using photo-polymerization induced anisotropic phase separation of the mixture composed of liquid crystal (LC) and F-monomer. Thanks to the immiscibility of fluoride, we could form high quality polymer walls with no light leakage. We measured electro-optic characteristics of a twisted-nematic (TN) LC cell whose polymer walls were fabricated by using the F-monomer, and the measurements were compared with that fabricated by using the monomer without fluorine.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.140-144
• /
• 2002

Dispersion polymerization of acrylamide was carried out in the media of methyl alcohol/$H_2O$ mixtures using hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively. The effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, methyl alcohol/$H_2O$ ratio, and purification of monomer and nitrogen purge on the particle size of the latices and molecular weight of the polymers were investigated. The average particle diameter increased with increasing concentration of initiator, water content in methyl alcohol/$H_2O$ media, and polymerization temperature, but decreased with monomer and stabilizer concentrations. The viscosity average molecular weight increased with increasing concentrations of monomer, steric stabilizer, and water content in dispersion media, but decreased with initiator concentration and polymerization temperature. The PAM polymers prepared with the purified monomer and the nitrogen purging before the reaction showed the highest molecular weight.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.109-117
• /
• 2004

We synthesized energetic prepolymer(2-nitrato ethyl oxirane, NEO) for plastic-bonded explosive and measured its thermodynamic parameters. 2-Nitrato ethyl oxirane(NEO) as a monomer was synthesized from 4-butene-ol, the first-step was preparation of 1-nitrate-3-butene and second-step was synthesized 2-nitrate-ethyl oxirane from 1nitrate-3-butene and then polymerized by cationic ring opening polymerization. The unreacted monomer concentration was measured by GC. The thermodynamic parameters were obtained from the ceiling temperature(Tc) values of 1 mole monomer at each reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of perpolymer(NEO). Number average molecular weight(Mn), polydispersity(PD), and glass transition temperature(Tg), viscosity of prepolymer(NEO) were 2000, 1.07, $-55^{\circ}C$ and 300 poise respectively.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.75-80
• /
• 2001

Holographic polymer dispersed liquid crystals (HPDLCs) have fabricated by irradiating an Ar-ion laser ( ${\lambda}$=514nm) at various intensity on LC/acrylate monomer mixtures which were sandwitched between two ITO coated glass plates. Monomer systems were composed of dipentaerythritol-hydroxy penta acrylate (DPHPA, f=5)/monofunctional acrylate monofunctional monomers. The LC used in this system was E7 (BL001, Merck). Gratings were fabricated by periodic interference of twobeams. Reflection efficiency-irradiation intensity-monomer type relationships were obtained from the UV-visible spectra of the HPDLC films. Peaks were found at a bit smaller wavelength than 514nm, due to the shrinkage of mixture volume upon polymerization. Real time measurements of diffraction efficiency have been obtained according to monomer types and LC contents.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.519-527
• /
• 2004

Stable poly(methyl methacrylate-co-divinylbenzene) (poly(MMA-co-DVB)) microspheres were prepared by precipitation polymerization using acetonitrile as the main medium under various polymerization conditions, including modifications of the agitation speed, monomer and initiator concentrations, DVB content in the monomer mixture, and the use of various cosolvents. Gentle agitation was required to obtain smooth spherical particles. The individually stable microspheres were obtained at monomer concentrations of up to 15 vol% in an acetonitrile medium. The number-average diameter increased linearly with respect to increases in the monomer and initiator concentrations. We found, however, that the uniformity of the microspheres was independent of the variation of the polymerization ingredients because nuclei formation was solely influenced by the crosslinking reaction of the monomers. We obtained higher yields for the polymerization at higher concentrations of monomer and initiator. The concentration of DVB in the monomer mixture composition played an important role in determining not only the size of the microspheres but also the yield of the polymerization. In addition, although we employed various cosolvents as the polymerization medium, we found that acetonitrile/2-methoxyethanol was the only system that provided spherical particles without coagulation. This finding indicates that the precipitation polymerization is strongly dependent on the solvent used as the medium.