• 공업화학
• /
• 제7권4호
• /
• pp.777-786
• /
• 1996

Seed 중합 방법에 의하여 단분산성 다공의 폴리아크릴로니트릴-에틸렌글리콜 디메타크릴레이트 (PAN) 고분자 마이크로 겔이 제조되었다. PAN 마이크로 겔의 물리적인 특성을 모노머/seed와 희석제/모노머의 비율, 가교제의 농도 및 희석제의 종류에 따라 연구하였다. PAN 마이크로 겔의 입도 분포는 모노머/seed의 비율이 50 이하 일 때 단분산성을 나타냈으며, 가교제의 농도가 증가할수록 입자 내부의 미소 구체 (microsphere)의 크기가 작아져 더욱 밀집된 형태를 나타내기 때문에 입자의 비표면적이 증대되었다. 또한 희석제로 톨루엔을 사용하고 희석제/모노머의 비율이 1.0일 때 입자표면의 세공이 가장 발달되었다.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.109-115
• /
• 2012

2단계 유화중합에 의한 단분산의 블루칼라 착색 poly(styrene-co-acrylic acid) 라텍스를 성공적으로 제조하였다. 0.21 ${\mu}m$의 polystyrene 시드를 이용하여 중합 2단계에서 Blue 606 염료와 acrylic acid의 중합으로 carboxyl 음이온을 갖는 블루칼라 라텍스를 합성하였다. 본 연구에서 제조한 블루칼라 라텍스는 모두 1.01 이하의 우수한 단분산도를 가지며 0.25~0.42 ${\mu}m$ 범위의 입자경을 나타내었다. 중합 2단계에서 acrylic acid 부가시간이 늘어남에 따라 입자경은 증가하였고 30 min 이상으로 늘어남에 따라 콜로이드 안정성을 갖는 블루칼라 라텍스가 제조되었다. 20 wt% AA 농도에서 -145 mV의 제타전위와 $-9.4{\times}10^{-6}\;cm^2/Vs$의 전기영동이동도를 나타내었다. 25 wt% DVB 농도하에서 396.7 K의 높은 유리전이온도를 나타내었다.

• 폴리머
• /
• 제28권6호
• /
• pp.524-530
• /
• 2004

스티렌, 폴리(에틸렌 글리콜) 메타크릴레이트 (PEG-MMA) 혹은 폴리(에틸렌 글리콜) 디메타크릴레이트 (PEG-diMMA)를 중성 매질에서 무유화제 (emulsifier-free) 유화 중합하여 표면에 에틸렌 글리콜기를 갖는 폴리스티렌 입자를 합성하였고, 이로부터 동결 건조되어진 분말을 제조하였다. 고분자 분말은 FT-TR 분광기로 구조를 확인하였고, 광산란 입도 분석기와 주사 전자 현미경 (SEM)을 이용하여 입자 크기와 분산도를 조사하였다. 스티렌에 대하여 공단량체 PEG-MMA는 2∼5 mol%, PEG-diMMA는 1 mol% 농도 부근에서 균일한 입자 크기를 얻을 수 있었다. 합성된 입자의 표면 전하를 유전 매질 내에서 ELS-8000 광산란법을 이용하여 제타 포텐셜을 측정하였다. 스티렌에 대하여 PEG-MMA 5 mol%에서 183 mV의 아주 높은 제타 포텐셜이 측정되었다.

• 한국대기환경학회지
• /
• 제17권6호
• /
• pp.441-450
• /
• 2001

A three stage impactor with the cutoff diameters of 1, 2.5, and 10$\mu\textrm{m}$ in aerodynamic diameter was developed and tested. The gravimetric method and the particle counting method were utilized to evaluate the collection performance of each stage. A vibrating orifice aerosol generator was employed to generate monodisperse test aerosols larger that 2$\mu\textrm{m}$ in diameter. Polystyrene latex (PSL) particles smaller than 2$\mu\textrm{m}$ in diameter were generated by an atomizer and the particle number concentration was measured by an Aerodynamic Particle Sizer Spectrometer. The experimental cutoff diameters obtained from the particle collection efficiency curves are in good agreement with the designed values. The square roots of Stokes number at 50% collection efficiency for stage 1, 2, and 3 are 0.42, 0.48, and 0.45, respectively. Effects of the particle bounce and the impaction plate on the collection efficiency were investigated. The collection efficiency curves including effect of the particle bounce were also compared with those of the MOUDI cascade impactor.

• 폴리머
• /
• 제33권1호
• /
• pp.33-38
• /
• 2009

은 카바메이트 착체 화합물의 환원에 의한 무전해 도금법으로 은/폴리스티렌 비드를 제조하기 위하여 폴리스티렌 및 아민 관능기를 가지는 공중합체 비드를 제조하였다. 스티렌, divinylbenzene(DVB) 그리고 2-(N,N-dimethylamino)ethyl methacrylate (DAEMA) 단량체들을 poly(vinyl alcohol) 존재 하에서 물/메탄올을 용매로 사용하여 무유화중합을 진행하였다. 30/0$\sim$1.5/0$\sim$3 wt%의 단량체 조성을 가지는 poly(styrene/DVB/DAEMA) 비드는 구형으로 1 ${\mu}m$의 일정한 크기를 가지고 있었다. 아민 기능기를 가지는 폴리스티렌 비드의 무전해 도금은 비드의 전처리 없이 silver 2-ethylhexylcarbamate (Ag-EHCB) 복합체와 히드라진 환원제를 사용하여 메탄올 용액에서 진행하였다. 제조된 비드와 도금된 비드 표면의 형태를 SEM으로 관찰하였으며 은 도금된 비드를 분산시켜 자외선 흡수 변화 그리고 도금된 은의 성분을 XRD로 분석하였다.

• 한국분말재료학회지
• /
• 제18권4호
• /
• pp.347-358
• /
• 2011

Two different schemes were adopted to fabricate ordered macroporous structures with face centered cubic lattice of air spheres. Monodisperse polymeric latex suspension, which was synthesized by emulsifier-free emulsion polymerization, was mixed with metal oxide ceramic nanoparticles, followed by evaporation-induced self-assembly of the mixed hetero-colloidal particles. After calcination, inverse opal was generated during burning out the organic nanospheres. Inverse opals made of silica or iron oxide were fabricated according to this procedure. Other approach, which utilizes ceramic precursors instead of nanoparticles was adopted successfully to prepare ordered macroporous structure of titania with skeleton structures as well as lithium niobate inverted structures. Similarly, two different schemes were utilized to obtain disordered macroporous structures with random arrays of macropores. Disordered macroporous structure made of indium tin oxide (ITO) was obtained by fabricating colloidal glass of polystyrene microspheres with low monodispersity and subsequent infiltration of the ITO nanoparticles followed by heat treatment at high temperature for burning out the organic microspheres. Similar random structure of titania was also fabricated by mixing polystyrene building block particles with titania nanoparticles having large particle size followed by the calcinations of the samples.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.86-88
• /
• 2006

The novel linear- (V-LUM) and cross-type macromonomers (C-VUM) of vinyl-terminated bifunctional polyurethane were synthesized and applied to the dispersion polymerization of styrene and MMA in ethanol. The existence of the vinyl terminal groups and the grafted macromonomer with styrene and PMMA was verified using 1H NMR and 13C NMR. Monodisperse polystyrene (PS) microspheres were successfully obtained above 15 wt % of macromonomer relative to styrene. The macromonomer can efficiently stabilize higher surface area of the particles compared to a conventional stabilizer, PVP. The grafting ratio of the PS calculated from 1H NMR linearly increased up to 0.048 with 20 wt % of the macromonomer and the high molecular weights (501,300 g/mol) of PS with increased glass transition and enhanced thermal stability were obtained. Furthermore, the stable and monodisperse PMMA microspheres having a weight-average diameter of $5.09{\mu}m$ and a good uniformity of 1.01 were obtained with 20 wt% L-VUM. The molecular weight increased, but the size of the PMMA particles decreased with the macromonomer concentration due to the increased stabilizing effect. The molecular weight of the PMMA was approximately two fold higher than that by a conventional PVP. The L-VUM acts as a reactive stabilizer, which gives polyurethane-grafted PS or PMMA with a high molecular weight. In addition, the XPS result showed that the C-PS (PS using the C-VUM) was anchored with a larger amount of PEG than that of the L-PS (PS using the L-VUM) on the particle surface. Thus, the reaction and stabilizing mechanism of the macromonomers for the formation of PS particles is proposed.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1891-1896
• /
• 2010

Submicron-sized polymeric colloidal particles can self assemble into 3-dimensional (3D) opal structure which is a useful template for photonic crystal. Narrowly dispersed polymer microspheres can be synthesized by emulsion polymerization in water using water-soluble radical initiator. In this report, we demonstrate a facile and reproducible emulsion polymerization method to prepare various polymeric microspheres within 200 - 400 nm size ranges which can be utilized as colloidal photonic crystal template. By controlling the amount of monomer and surfactant, monodisperse polymer colloids of polystyrene (PS) and acrylates with various sizes were successfully prepared without complicated synthetic procedures. Such polymer colloids self-assembled into 3D opal structure exhibiting bright colors by reflection of visible light. The colloidal particles and the resulting opal structures were rigorously characterized, and the wavelength of the structural color from the colloidal crystal was confirmed to have quantitative relationship with the size of constituting colloidal particles as predicted by Bragg equation. The tunability of the structural color was achieved not only by varying the particle size but also by infiltration of the colloidal crystal with liquids having different refractive indices.