• Geophysics and Geophysical Exploration
• /
• v.3 no.4
• /
• pp.119-124
• /
• 2000

A new fast algorithm for travel time calculation using mono-chromatic one-way wave equation was developed based on the delta function and the logarithms of the single frequency wavefield in the frequency domain. We found an empirical relation between grid spacing and frequency by trial and error method such that we can minimize travel time error. In comparison with other methods, travel time contours obtained by solving eikonal equation and the wave front edge of the snapshot by the finite difference modeling solution agree with our algorithm. Compared to the other two methods, this algorithm computes travel time of directly transmitted wave. We demonstrated our algorithm on migration so that we obtained good section showing good agreement with original model. our results show that this new algorithm is a faster travel time calculation method of the directly transmitted wave for imaging the subsurface and the transmission tomography.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.16-23
• /
• 2009

The three-dimensional ship motion with forward speed was solved by a finite element method in the time domain. A boundary value problem was described in the frame of a fixed-body reference, and the problem was formulated according to Double-Body and Neumann-Kelvin linearizations. Laplace's equation with boundary conditions was solved by a classical finite element method based on the weak formulation. Chebyshev filtering was used to get rid of an unwanted saw-tooth wave and a wave damping zone was adopted to impose a numerical radiation condition. The time marching of the free surface was performed by the 4th order Adams-Bashforth-Moulton method. Wigley I and Wigely III models were considered for numerical validation. The hydrodynamic coefficients and wave exciting forces were validated by a comparison with experimental data and the numerical results of the Wigley I. The effects of the linearization are also discussed. The motion RAO was also checked with a Wigley III model through mono-chromatic and multi-chromatic regular waves.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.406-411
• /
• 2003

This paper deals with the effect of laser material processing on the EMU production technique. Material processing with lasers takes advantage of all the characteristics of laser light. The high energy density and directionality achieved with lasers permits strong localized heat- or photo-treatment of materials with spatial resolution below one micrometer. The pulsed and mono-chromatic light allows the control of depth of heat treatment or selective excitation. The laser beam can be moved to process large areas, is a sterile tool and is no subject to wear and tear. Using laser processing have taken more interests in EMU production for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.95-106
• /
• 1999

A numerical model is represented to calculate the wave fields such as the reflected waves, the transmitted waves and the depth-averaged velocities over submerged breakwaters for the normally incident wave trains of nonlinear mono-chromatic wave and solitary wave. The finite amplitude shallow water equations with the effects of bottom friction are solved numerically in time domain using an explicit dissipative Lax-Wendroff finite difference method. The numerical model is verified by comparisons with the other numerical results and the measured data. It is found that the submerged breakwater may be more useful for protecting the energies of monochromatic waves rather than solitary waves. Finally, the armor stability on submerged breakwater is indirectly analyzed using the hydrodynamic characteristics of flow fields.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.107-123
• /
• 2016

The purpose of this study is to obtain specific data about the characteristics of color preference on Women's street fashion within China and Korea. Photos of Women's street fashion from the twenties and thirties were taken in person in four cities in China(Beijing, Dalian, Qingdao and Nanjing) and Seoul from July 2nd to August 10th, 2015. Three hundred photos in each city were selected, making a total of 1,500 photos. In the analysis of the colors of the clothing in these five cities, the uses of the multi color was most frequent in Dalian, while those of Black was most prevalent in Beijing, Qingdao, Nanjing and Seoul. The Black proved to be commonly preferred through all the items, regardless of terms of the nationality, areas and seasonal changes. The high incidence of Purple Blue color in Beijing, Dalian and Qingdao might be attributed to their preference of the blue jeans. The Multi color was highly shown in all the cities which might be due to their preference of compound colors rather than the mono ones. The high preference for the chromatic colors such as Red, Yellow Red and Yellow might be ascribed to the Chinese traditional color preferences. The differences lies in the color tones, such as the dark and light grayish tone emphasized in Seoul and Nanjing, and vivid and strong tones in Beijing, Dalian and Qingdao. Seoul shows a liking for the achromatic colors, preferring dark and grayish tones, compared with four cities in China, only Nanjing has a similar trend to Seoul. This study analyzes geographical preferences in China that possibly contribute to the launching of Korean fashion brands in view of the design and marketing as a useful basic resources.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.142-147
• /
• 2015

The artificial light sources for growth of plant are usually high-pressure sodium lamp, metal haloids lamp, and fluorescent light; however, these light sources have relatively weaker Red and Blue lights that are necessary for growth of plants. Especially the effect of Photosynthetic Photon Flux Density (PPFD) is pointed out as the weakness. Meanwhile, LED light source can be selected by specific wavelength to greatly improve the effect of PPFD. In this regard, this paper aims to investigate the promotion of plant growth by measuring photosynthetic photon flux density (hereafter referred to as PPFD) according to changes in light quality of the LED light sources. Towards this end, LED light sources for plant growth were produced with 4 kinds of mono-chromatic lights and 6 kinds of combined lights by mixing red, blue, green and white lights. A comparative analysis was conducted to investigate the effects of optical properties and PPFD on plants (green leaf lettuce) using the produced light sources. The results monochromatic light has fastest growth rate, but plant growth conditions have poor. This being so, mixed light is suitable for the green leaf lettuce.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.236-243
• /
• 2003

We discussed the design of lens module schematic eyes equivalent to finite model eyes, which are used to model the human eye based on spherical aberration and Stiles-Crowford effect. The optical system for head mounted display (HMD) is designed and evaluated using lens module schematic eyes. In addition to a compact HMD system, an optical system with high Performance is required. To satisfy these requirements, we used diffractive optical elements and aspheric surfaces so that the color and mono-chromatic aberrations were corrected. The optical system for HMD is composed of 0.47 inch micro-display of SVGA grade with 480,000 pixels, a plastic hybrid lens for the virtual image, and the lens module schematic eyes. The designed optical system fulfills the current specifications of HMD: such as, EFL of 31.25 mm, FOV of 24H$\times$18V$\times$30D degrees, and overall length of 59.1 mm. As a result, we could design an optical system useful for HMD; the system is expected to be comfortable while the user wears it.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.192-198
• /
• 2004

A numerical method is developed to solve a two-dimensional diffraction problem for a body located in a sediment pocket where a heavier muddy water is trapped. In the present study, the wave exciting forces acting on a submerged body in the water-sediment interface by an incident wave is investigate. It is assumed that the heavier mud is trapped locally in a sediment pocket. A mathematical formulation is made in the scope of the potential theory. The fluid is assumed to be inviscid, incompressible and its motion irrotational. The boundary conditions on the unknown free surface and interface are linearized. As a method of solution, the localized finite-element method is adopted. In the method, the computation domain is reduced by utilizing the complete set of analytic solutions known in the infinite subdomain to be truncated by introduction of an appropriate juncture conditions. The main advantage of this method is that any complex geometry of the boundaries can be easily accommodated. Computations are carried out for mono-chromatic plane progressive surface waves normally incident on the domain. Numerical results are compared with those obtained by Lassiter based on Schwingers variational method. Good Agreements are obtained in general. Another numerical computations are made for the cases with and without a body in the sediment pocket.

• Journal of Plant Biotechnology
• /
• v.31 no.3
• /
• pp.239-248
• /
• 2004

This experiment was carried out to confirm that phytochrome regulates anthocyanin bio-synthesis during cell suspension culture system of grape or not. In suspension culture of grape, maximum accumulation of anthocyanin was observed at the stationary phase under continuous white light condition. From mono-chromatic light interruption for 24h at the 4th or 7th day on the suspension cultured cells, the anthocyanin accumulation was highly enhanced at the light interruption at 7th day than 4th day under all monochromatic light treatment. However, the cell growth patterns were not affected by any light treatment. In the darkness, the anthocyanin synthesis was very low but remarkably increased by blue light or red light irradiation. However, the increase of anthocyanin accumulation by blue or red light was suppressed by far-red light in the suspension cells of grape. This suppression by far-red light on the anthocyanin synthesis also observed on the cells treated red or far-red light alternatively. These results implied that phytochrome regulation system may be involved in the anthocyanin biosynthesis of the suspension grape cells. By RNA expression analysis, chalcone synthase (CHS) gene was expressed highly by blue and red light but low by far-red light. The synergistic increase of CHS gene expression was also observed at the treatment of blue light followed by red for 24h. This result may explain the increase of anthocyanin accumulation in B/R treatment. Although the expression of phytochrome gene (PHYA or PHYB) was not highly increased by all light treatment (blue, red, and far-red light) the expression of both PHYA gene and PHYB gene was increased a little in cells treated red or far-red light. In grape suspension cells, the red light enhanced the anthocyanin synthesis, whereas the far-red light was suppressed. Although it was not confirmed whether or not phytochrome gene is activated in anthocyanin accumulating grape cells, we believed that anthocyanin biosynthesis in grape cells may be regulated under phytochrome signal transduction system.