• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.29-34
• /
• 2010

This paper is aimed to develop monitoring software for detecting the characteristics of current and voltage signals for series arc on electric wire. In order to attain this purpose, the characteristics of series arc were analyzed by the current and voltage signals on electric wire which were installed, and also analyzed by the changes of RMS, instantaneous of waveform value in time domain and THD in frequency domain. Monitoring program which analyze the signal was developed by Labview which can analyze in time domain and frequency domain, and save data. Experimental setup for detecting verification of monitoring program was composed loads of a lamp, an electric heater and an electric fan loads which were usually using. Measurement points for detecting verification of monitoring program were selected at both the panel board and the arc generator at the same time. As results of the experiments by monitoring program, the arc current waveform showed the same characteristic in all measurement points of all load. But the arc voltage waveform was different in each measurement point. When arc occurred, the THD of current value increased above 20%. The results of this study will be effectively used in developing the preventive system of electric fire by series arc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1366-1372
• /
• 2006

After the import liberalization of agricultural products, The Imported agricultural products rapidly increased market share of domestic agricultural products. But Imported agricultural products include various agricultural chemicals and food additives. In order to improve competitiveness in domestic markets of farmhouses and to secure food safety, the farmers needs to introduce Systematic support and various system. In this paper, established system that use Monitoring technology, to inform production information and management information about agricultural products to consumer by real time. Therefore unused analog camera such as CCTV(Closed-Circuit Television) for real time Monitoring. This system Used web camera that offer picture quality that is good than CCTV at place that consists network without distinction in the place. An advantage of real time Monitoring system designed multi-vision interface showing multi images on single screen and, for the purpose of the improvement in efficiency, the functions of saving images and of scheduling the time to save the images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.713-718
• /
• 2014

This paper proposed a real-time monitoring system that can realize effective operation of snowplows each of the local autonomous entities secures to cope with disasters in Korea like a wintertime heavy snowfall and also can promptly cope with the spot facing a heavy snowfall disaster by doing real-time monitoring on the information of the snow-removal site and the mobility of the vehicles. Also, the study has designed a relay terminal analysis tool so that the proposed system can analyze all kinds of controlling information and diagnose the relay terminal effectively. The proposed system can realize effective and emergent coping with the situations of a heavy snowfall disaster through real-time routing trace as well as effective work progress within a short time by doing real-time monitoring on the information about the status of snow-removal work and vehicle controlling for snow-removal work as well as the location information of snow-removal vehicles in the situations of a heavy snowfall.

• The Journal of Society for e-Business Studies
• /
• v.13 no.2
• /
• pp.101-115
• /
• 2008

Recently in the human society, the crime using small arms has increased. Also, many accidents happen because of incomplete management of chemicals and radiation. Accordingly, it is necessary to manage dangerous objects by tracing the position of dangerous objects and rapidly providing the correct information for them. This paper presents a web-based system for real-time monitoring of dangerous objects using RFID in order to overcome the limitations and problems of current dangerous objects management techniques. In this paper, we define the architecture for web-based dangerous objects monitoring system and the scheme for storing information of a dangerous object in the RFID tag. We also implement the web-based monitoring system and present the execution result of the system. The proposed real-time monitoring system is composed of the dangerous objects monitoring server which manages information of dangerous objects and controls them, the dangerous objects monitoring middleware which is mediator between dangerous objects and the server, the RFID reader which reads information of dangerous objects from RFID tags attached to the objects and the database which stores information, status and position of dangerous object. The proposed system manages diverse dangerous objects such as small arms, radiation and harmful chemicals based on the position of them using RFID, so the user can check dangerous objects when they are checked in and checked out and the user can acquire the real-time position information of them through the system. Furthermore, the user can visually monitor dangerous objects through web browser from any where and at any time because the system is web-based system and it provides graphical user interface.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.59-66
• /
• 2007

In korea, TIT(Transport Information Technology) based IP-TV services have been provided in Saemaeul trains and some sections of subway trains, But the software systems for the service performed in alternated fashions and suffered from many problems such as suspension, memory leaking and overflow, These problems increased playback loss time and resulted in bad reliabilities, In this paper, a software TIT monitor is designed and implemented for Monitoring module and Reset module in physically poor environments, The designed system formalized monitoring time intervals for effective monitoring, Through the real experiments, playback time is improved in 7.2% comparing to existing system.

• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.311-316
• /
• 2011

Monitoring the carbon dioxide concentration in arterial blood is vital for the evaluation and prevention of pulmonary disease. Yet, domestic pure arterial blood carbon dioxide sensor technologies are not being developed, instead all sensors are imported. In this paper, we develop a real time monitoring system for arterial blood partial pressure of carbon dioxide($pCO_2$) gas from the wrist by using a carbon micro-heater. The micro-heater was fabricated with a thickness of 0.3 ${\mu}m$ in order to collect the carbon dioxide under the skin. The micro-heater has been designed to perform temperature compensation in order to prevent damage to the skin. Two clinical trials of the system were undertaken. As a result, we demonstrated that a portable, transcutaneous carbon dioxide analysis($TcpCO_2$) device produced domestically is possible. In addition, this system reduced the analysis time significantly. Carbon films could reduce the unit price of these sensors by replacing the gold film used in foreign models. Also, we developed a real time monitoring system which can be used with optical biosensors for medical diagnostics as well as gas sensors for environmental monitoring.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.834-837
• /
• 2005

In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.268-273
• /
• 2011

Withstanding the continuous treat from the typhoon and nasty weather from ocean, the development of the real time monitoring buoy such as ocean wave related monitoring buoy system becomes essential. In this research, the development of the ocean wave monitoring buoy system had been done domestically. The development including the data real-time monitoring (wind, temperature and pressure) added in the buoy, buoy mooring and real-time data communication system. The developed wave monitoring buoy system (drift type, wave direction and wave height type) is expected to meet the demands.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.3
• /
• pp.239-245
• /
• 2002

Many civil and infrastructures continue to be used despite aging and the associated potential for damage accumulation. Therefore, the ability to monitor the health of these systems is becoming increasingly important. The purpose of this paper is to propose a real-time health monitoring system of cable-stayed bridge, based-on non-destructive measurement. And also this paper focuses on the safety assessment for bridge from health monitoring system to accomplish this safety assesment. Using the proposed health monitoring system, it helps bridge maintenance and reduces the economic cost of a life-cycle costs. Also it give important data to develop the design and analysis method for cable-stayed bridges.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.838-844
• /
• 2012

This paper proposes the effective monitoring method for marine engine system, which is implemented based upon Controller Area Network (CAN). As the marine engine monitoring system requires various kind of information, a lot of sensor nodes are distributed to several places. The CAN supports huge numbers of message IDs for the sensor nodes and provides a stable communication channel in a wide area such as a 12,000 TEU container ship. Since the CAN is priority-based communication system, some of hard real-time messages like alarm messages which are time-critical to the operation of the vessel cannot be communicated within the dead-time. Therefore it is desirable to distinguish the bandwidth of the CAN for static state messages and transition-state messages not to be harmful to the engine operations. Using the features of message arbitration ability of the CAN, it is proposed in this paper that the bandwidth allocation is dynamically adjusted to cope with the increment of input signal to improve the performance of monitoring system. Effectiveness and validity of the proposed scheme have been demonstrated through real experiments.