• 한국융합학회논문지
• /
• 제10권12호
• /
• pp.281-286
• /
• 2019

자동차의 하부를 수리하기 위해서는 차 밑으로 들어가야 된다. 그러나 이 작업은 수리공이 수리하기에 불편하기도 하고 사고를 일으킬 수도 있다. 이러한 난제들을 해결하기 위하여 개발된 장비가 자동차의 리프트이다. 본 연구에서는 세 가지의 자동차의 리프트 Model 1, 2, 3을 설계하였다. 구조용 강의 물성치를 모델들에 적용하고 동일한 조건으로 같은 하중을 가하여 해석을 하였다. Model 2, 3이 Model 1보다 더 적은 구조적 변형을 보였으며 Model 2, 3이 Model 1보다 구조적으로 더 안정적인 것을 나타냈다. 본 연구결과를 토대로 얻은 자동차 리프트 형상에 따른 내구성 해석을 통한 융합 연구에 대한 설계데이터를 활용함으로서 실생활에서의 자동차 수리 기자재 부품에 융합하여 그 미감을 보일 수 있다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.25-32
• /
• 2005

The purpose of this study was to examine an effect of fluoride recharging on fluoride release and surface change of fluoride-releasing restorative materials. Six commercially available fluoride releasing restorative materials (Fuji II LC Improved: FL, Compoglass F: CF, Dyract AP: DA, F2000: FT, Gradia Direct: GD, and Tetric Ceram: TC) were selected as experimental materials. Disk specimens were fabricated with split teflon mold to the final dimensions of 15 mm in diameter and 1 mm in thickness. Ten samples of each material were fabricated and stored in deionized water at $37^{\circ}C{\pm}1^{\circ}C$ for 3 months. Before fluoride recharging, all specimens were polished sequentially from #800 to #2000 emery papers. Fluoride recharging was done at 5-day interval using 2.0% NaF gel. The release of fluoride into the storage water was monitored using a fluoride ion electrode. Data were analyzed by one-way ANOVA and Tukey's multiple range test. The results obtained were summarized as follows; 1. Fluoride recharge capability were FL > CF > DA and TC group after 12 times exposure to 2.0% NaF gel (P<0.05). 2. All the experimental materials, except for FT group, showed the increase of fluoride release and surface roughness. 3. Fluoride-releasing rates returned to base line within 3 days.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.75-81
• /
• 2012

Purpose: All ceramic crown, made from zirconia instead of metal for core material, is recognized the best esthetical prosthesis. Recently, high-priced zirconia blocks and expensive CAD/CAM machines come into use for making zirconia core. In this study, slip casting process is adapted to evaluate the possibility of the recycling the remained parts of zirconia block after machining. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Passed powders were ball milled under various conditions to obtain the optimum zirconia slip for casting. Solid casting method was used for casting the specimens with plaster mold. Formed specimens were dried and biscuit fired at $1,000^{\circ}C$ for 1 hour. Biscuit fired specimens were finished with exact shape of square pillar. Finished specimens were fired from $1,200^{\circ}C$ to $1,550^{\circ}C$ at $50^{\circ}C$ intervals for 1 hour. Linear shrinkage, apparent porosity, water absorption, bulk density, and flexural strength were tested. Microstructures were observed by SEM. Results: Above examinations indicated that the optimum firing temperture was $1,500^{\circ}C$, and when fired at this temperature for 1 hour, apparent porosity was 0% and flexural strength was 680MPa. SEM photomicrographs showed uniform 200~300nm grain size, which is equal with microcture of sintered commercial zirconia block. when compare 24% linear shrinkage of cast specimen with 20% linear shrinkage of CAD/CAM machined block, it was estimated that the size controlling of cast core was not so difficult. Conclusion: According to the all of this experimental results, the cast zirconia core produced from the remained parts of zirconia block was possible to use for all ceramic denture.

• The Plant Pathology Journal
• /
• 제34권5호
• /
• pp.403-411
• /
• 2018

This study takes strawberry-fruits as the test material and discusses the effect of Burkholderia contaminans B-1 on preventing postharvest diseases and inducing resistance-related substances in strawberry-fruits. Soaking and wound inoculating is performed to analyze the inhibitory effects of different treatment solutions on the gray mold of postharvest strawberry-fruits. The count of antagonistic bacteria colonies in the wound is found, and the dynamic growth of antagonistic bacteria and the pathogenic fungus is observed by electron microscopy. The results indicated that, either by soaking/wound-inoculating, the fermentation and suspension of antagonistic bacteria significantly reduced the incidence of postharvest diseases of strawberry-fruits. With wound inoculation, the inhibition rate of antagonist fermentation and suspension ($1{\times}10^{10}cfu/ml$) respectively reached 77.4% and 66.7%. It also led to a significant increase in the activity of resistance-related enzymes, i.e., phenylalanine ammonia lyase (PAL), 4-coumarate coenzyme A ligase (4CL), cinnamate-4-hydroxylase (C4H) and chalcone isomerase (CHI). On 1 d and 2 d post-treatment, the activity of 4CL was respectively 3.78 and 6.1 times of the control, and on 5 d, the activity of PAL was increased by 4.47 times the control. The treatment of antagonistic bacteria delayed the peaking of cinnamyl-alcohol dehydrogenase (CAD) activity and promoted the accumulation of lignin and total phenols. The antagonistic bacteria could be well colonized in the wounds. On 4-5 d post-inoculation, the count of colonies was $10^8$ times of that upon inoculation. Electronmicroscopy indicated that the antagonistic bacteria delayed the germination of pathogenic spores in the wounds, and inhibited further elongations of the mycelia.

• 대한화학회지
• /
• 제21권5호
• /
• pp.379-383
• /
• 1977

친유기성 bentonite가 고분자 물질중에서 잘 분산된다는 성질을 이용하여 고분자 물질과 bentonite의 복합재를 제조하고 그 기계적 성질에 관해서 연구하였다. Bentonite는 고분자 물질내에서 분산과 결합이 좋아지도록 imidazoline으로 처리한 후 충진제를 사용하였다. 고분자 물질인 polyethylene은 입도가 100mesh인 것을 사용하였고 친유기성 bentonite 즉 bentone은 입도가 250mesh인 것을 실험에 사용하였다. 분말의 혼합에는 V형 혼합기를 사용하였으며 Banbury mixer로 용융 혼합 시켰다. 시편의 모양은 plate press에 시료를 놓고 열을 가하여 판상으로 제작하였다. 물성을 조사하기 위하여 인장 강도, 곡 강도, 그리고 압축 강도 시험을 하였다. 인장 강도, 연신율, 곡 강도, 그리고 일정한 하중에 대한 굴곡율은 충진제 증가에 따라 감소되었다. 또한 압축 강도는 충진제 증가에 따라 크게 증가 하였다.

• 한국치위생학회지
• /
• 제12권3호
• /
• pp.533-541
• /
• 2012

Objectives : The purpose of this study was to evaluate the effects of tooth bleaching agent contained 35% hydrogen peroxide on the color, microhardness and surface roughness of tooth-colored restorative materials. Methods : Four types of tooth-colored restorative materials, including a composite resin(Filtek Z350 ; Z350), a flowable composite resin(Filtek P60 : P60), a compomer(Dyract$^{(R)}$ AP ; DY), and a glass-ionomer cement(KetacTM Molar Easymix ; KM) were used in the study. The specimens($8mm{\times}5mm$) were made by using a customized acrylic mold. Each material was divided into two groups equally(n=40) : experimental group(35% HP) and control group(distilled water). 35% HP group was treated 30 mim/5 days for 15 days. Each 30 minute treatment session consisted of two 15 minute cycles of gel application with 20 second light exposure. The authors measured the color, microhardness, and roughness of the specimens before and after bleaching. The data were analyzed with ANOVA and T-test. Results : 35% HP group showed an apparent color change(${\Delta}E^*$) than control group. In particular, DY and KM showed a noticeable color change and statistically significant differences(p<0.05). 35% HP group showed a reduction in microhardness. Z350 and P60 does not have a statistically significant difference(p>0.05), DY and KM showed a statistically significant difference(p<0.05). Percentage microhardness loss(PML) of control group was 0.6 to 5.5% in the group, 35% HP group was 6.6 to 34.6%. Roughness was increased in 35% HP group after bleaching. Especially DY and KM were significantly increased(p<0.05). Conclusions : Bleaching agents may affect the surface of existing restorations; therefore, they should not be used indiscriminately when tooth-colored restorations are present.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.126-131
• /
• 2011

PURPOSE. The aim of this in vitro study was to examine the curing efficiency of various resin-based materials polymerized through ceramic restorations with 3 different thicknesses. Curing efficiency was evaluated by determining the surface microhardness (VHN) of the resin specimens. MATERIALS AND METHODS. Four kinds of resin materials were used. Z350 (3M ESPE $Filtek^{TM}$ Z350: A2 Shade), Z250 (3M ESPE $Filtek^{TM}$ Z250: A2 Shade) and $Variolink^{(R)}$ II (VL: Ivoclar vivadent, base: transparent) either with or without a self-curing catalyst (VLC: Ivoclar vivadent, catalyst: low viscosity/transparent) were filled into the silicone mold (10 mm diameter, 1 mm thick). They were cured through ceramic discs (IPS e.max Press MO-0 ingot ivoclar vivadent, 10 mm diameter, 0.5, 1 and 2 mm thicknesses) by LED light-curing units for 20 and 40 seconds. Vicker's microhardness numbers (VHNs) were measured on the bottom surfaces by a microhardness tester. Data were analyzed using a 3-way analysis of variance (ANOVA) at a significance level of 0.05. RESULTS. The thickness of ceramic disc increased, the VHNs of all four resin types were decreased (P<.05). The mean VHN values of the resins light cured for 40 seconds were significantly higher than that of LED for 20 seconds in all four resin materials (P<.05). VLC showed significantly higher VHN values than VL regardless of other conditions (P<.05). Z350 and Z250 showed higher values than VL or VLC (P<.01). CONCLUSION. Thinner ceramic disc with increased curing time resulted higher VHN values of all resin materials. The use of a catalyst produced a greater hardness with all polymerization methods. Restorative resin materials (Z350, Z250) showed higher VHN values than resin cement materials (VL, VLC).

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권9호
• /
• pp.1294-1299
• /
• 2002

The study aimed to evaluate the influence of molasses in ensiling cassava and Gliricidia tops, common crop residues in the farming systems of Vietnam. Four levels of sugarcane molasses: 0, 30, 60 and 90 kg per tonne of fresh material, and two storage periods (2 and 4 months) for each of the two plant species: Cassava (Manihot esculenta, Crantz) and Gliricidia (Gliricidia sepium, Jacq.) were allocated in a 4${\times}$2 factorial completely randomized block design with 3 replicates. A total of 48 plastic bags, each one containing 10 kg herbage were used. Based on the colour, smell and mold appearance, all the silages were considered to be acceptable but with more spoiled silages with higher levels of additives. DM of herbages (25.8% and 22.4% in cassava and Gliricidia tops, respectively) were not changed during ensiling and the molasses additive had no significant effect on the silage DM. Contents of CP and NDF in the cassava tops silage decreased significantly with increased level of molasses and storage period, respectively. The mean pH values of non-molasses silages were 4.39 in cassava tops and 4.60 in Gliricidia tops. Increased additive levels significantly reduced silage pH in Gliricidia (p<0.01) but not in cassava tops silage (p=0.10). Longer storage period significantly reduced pH in both silages. The water soluble carbohydrate (WSC) concentrations of cassava tops and Gliricidia tops were reduced by 90 and 80%, respectively, after ensiling. Molasses addition increased significantly the silage WSC concentrations. HCN contents in the fresh cassava and Gliricidia tops were reduced by 68 and 43%, respectively, after 2 months ensiling, and were continuously reduced during storage. A reduction of 25% and 42% in the tannin content of fresh cassava and Gliricidia tops, respectively was found after ensiling. Storage time and molasses additive had little affect on the tannin content. Silage lactic acid concentrations were around 1,0% of DM in cassava and 1.7% of DM in Gliricidia top silages, and no effect of molasses additive and storage time was found. It is concluded that cassava and Gliricidia tops residues can be preserved successfully by ensiling, and only low levels of molasses additive are needed to improve silage fermentation.

• 한국균학회지
• /
• 제41권2호
• /
• pp.132-135
• /
• 2013

검은 Aspergillus 속균은 동양의 발효산업에서 매우 중요한 곰팡이로서 식품산업에 관련된 검은 Aspergillus를 흑국균이라고 한다. 흑국균은 A. luchuensis, A. niger, A. tubingensis로 구성이 되어 있는데 이 중에서 A. luchuensis는 동양의 발효산업에서 매우 중요한 곰팡이로 알려져 있다. 우리나라 전통 된장과 간장의 주요 원료가 되는 메주에서도 검은 Aspergillus가 흔히 발견되었다. 33균주의 검은 Aspergillus가 2008년부터 2011년 사이에 전국적으로 수집한 98개의 완성메주로부터 분리되었고 추가로, 발효과정에 있는 메주로부터 검은 Aspergillus 21균주를 분리하였다. ${\beta}$-tubulin과 calmodulin 유전자 염기서열 분석을 통하여 이들을 동정한 결과 이들은 A. niger 21균주, A. luchuensis 14균주, A. tubingensis 10균주, A. welwitschiae 9균주로 동정되었다. 이 중 A. luchuensis는 생장이 활발하고 단백질, 지방, 탄수화물 분해력이 높은 것으로 조사되어 이들의 산업적 응용에 대한 추가의 연구가 필요한 것으로 사료된다.

• 한국약용작물학회지
• /
• 제21권1호
• /
• pp.45-48
• /
• 2013

This study was carried out to know the substitute effect of Yacto (leaf mold compost) on popped rice hulls compost (PRHC) in Yang-jik nursery bed of Panax ginseng. PRHC was mixed with Yacto as 50:50 ratio, and 1 ~ 2% of the mixed oil cake, rice bran and urea were also added to promote decaying the mixed compost. The mixed compost made by PRHC and Yacto was showed that positive effect on the growth of ginseng seedling when it was mixed with 1% of oil cake and rice bran, and 2% of mixed oil cake. But addition to the 2% of urea in the mixture of PRHC and Yacto was not positive effect on the growth of ginseng seedling. Root yield of the mixed compost was similar to that of conventional compost by made 100% of Yacto. Therefore, the mixed compost can substitute for Yacto when PRHC and Yacto were mixed by 50:50 ratio and added 1% of oil cake and rice bran.