• 한국융합학회논문지
• /
• 제9권8호
• /
• pp.155-160
• /
• 2018

자동차 시트는 주행시 운전자의 편의와 안전을 제공하는 하나의 부품이다. 최근 그 시트는 의자와 같은 용도 외에 외부의 충격이나 진동으로부터 운전자를 보호하고 편의를 주는 역할을 하고 있다. 자동차의 충돌 안전성 및 내구성과 같이 시트 프레임의 구조적인 기능에 대한 설계가 중요하다. 본 연구에서는 시트 프레임의 구조적인 안전성과 내구성을 높이기 위하여 시트 백 프레임 부분에 환봉을 1개씩 증가하여 시트를 설계하였다. 설계 및 해석 프로그램으로는 CATIA와 ANSYS를 사용하여 본 연구를 수행하였다. 구조해석과 진동해석을 통한 본 연구 결과로서는 Model 4가 타 모델 대비 더 뛰어난 내구성을 가지는 것을 알 수 있었다. 이 결과를 이용함으로서 구조적인 안전성과 내구성을 가진 자동차 시트 프레임 설계를 할 때에 유용한 자료가 될 것이라고 사료되며, 자동차 시트 프레임의 디자인을 융합기술에 접목하여 미적 감각을 나타낼 수 있다.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.130-134
• /
• 2016

Due to the need for advanced technologies in the automotive industry, the demand for lighter and safer vehicles has increased. Even though various nonferrous metals, like Aluminum, Magnesium and also Carbon Fiber Reinforced Plastic (CFRP), have been implemented in the automotive industry, a lot of technical research and development is still focused on ferrous metals. In particular, the market volume of High Strength Steel (HSS) parts and Ultra High Strength Steel (UHSS) by hot press forming parts has expanded significantly in all countries' automotive industries. A new tool steel, High Thermal-Conductivity Tool Steel (HTCS), for stamping punches and dies has been developed and introduced by Rovalma Company (Spain), and it is able to support better productivity and quality during hot press forming. The HTCS punches and dies could help to reduce cycle time due to their high thermal conductivity, one of the major factors in hot press forming operation. In this study, test dies were manufactured in order to verify the high thermal conductivity of HTCS material compared to SKD6. In addition, thermal deformation was inspected after the heating and cooling process of hot press forming. After heating and cooling, the test dies were measured by a 3D scanner and compared with the original geometry. The results showed that the thermal deformation and distortion were very small even though the cooling time was reduced by 2 seconds.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.285-293
• /
• 2009

Thermal infrared cameras have been conducted actively in various application areas, such as military, medical service, industries and cars. Because of their characteristic of sensing the radiant heat emitted from subjects in the range of long-wavelength($3{\sim}5{\mu}m$ or $8{\sim}12{\mu}m$), and of materializing a vision system, when general optics materials are used, they don't react to the light in the range of long-wavelength, and can't display their optic functions. Therefore, the materials with the feature of higher refractive index, reacting to the range of long-wavelength, are to be used. The kinds of materials with the characteristic of higher refractive index are limited, and their features are close to those of metals. Because of these metallic features, the existing producing method of optical systems were direct manufacturing method using grinding method or CAD/CAM, which put limit on productivity and made it difficult to properly cope with the increasing demand of markets. GASIR, a material, which can be molded easily, was selected among infrared ray optics materials in this study, and the optical system was designed with two Aspheric lenses. Because the lenses are molded in the environment of high temperature and high pressure, they require a special metallic pattern. The metallic pattern was produced with materials with ultra hardness that can stand high temperature and high pressure. As for the lens mold, GMP(Glass Molding Press) of the linear transfer method was used in order to improve the productivity of optical systems for thermal infrared cameras, which was the goal of this paper.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.39-44
• /
• 2015

Optical characteristics including the radiant flux and viewing angle of UV LEDs were investigated according to both silicone encapsulants with different refractive indexes and lens shapes. Lead frame was fabricated using the enhanced heat dissipation characteristics with a heat slug structure and the reflector based on EMC(Epoxy Mold Compound) material. Four types of lens shapes were designed and their optical characteristics depending on the refractive index of silicone encapsulants were evaluated. The maximum radiant flux can be achieved when the height of lens are 1.32mm and 1.08mm for silicone encapsulants with low and high refractive indexes, respectively. Depending on the encapsulating method, the viewing angle changes from $148.9^{\circ}$ to $130.2^{\circ}$ for low refractive index and from $145.3^{\circ}$ to $136.8^{\circ}$ for high refractive index. As a result, it is found that the optical characteristics of UV LEDs can be controled through both encapsulating method and the refractive index of encapsulants.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1549-1554
• /
• 2010

플라스틱 나사는 경량성, 내식성, 열 및 전기절연성이 우수하여 최근 금속나사 대체용도로 사용 되고 있다. 플라스틱 나사는 사출성형에 의해 제작되며 성형과정에서 수축이 발생하여 형상정밀도가 저하된다. 특히 소형 정밀나사의 경우 마이크로미터 단위의 정밀도를 요구하는 관계로 소성가공에 의해 제작되는 금속나사를 대체하기 위해서는 많은 어려움이 따른다. 본 연구에서는 사출성형 공정의 수치해석을 통해 금형설계 인자를 결정하였고, 실험계획법을 적용하여 변형량을 최소화하기 위한 성형조건을 도출함으로써 플라스틱 나사의 형상정밀도 향상을 위한 연구를 수행하였다.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.43-51
• /
• 2009

Paper mill sludges are discharged around 870,000 M/T annually. Only 30% of the paper mill sludge have been recycled and the rest has been disposed by land fill, incineration, ocean abandonment and other ways. Because of overall prohibition of sludge disposal by London Dumping Convention in 2012, a urgent counter measure for paper mill sludge must be provided. In this paper, some basic experiments were carried out to develop a tray cell pot using paper mill sludge for increasing the recycling potential of the wasted sludge. To establish the manufacturing parameters, the tray cell pots were made with three types of materials including virgin pulp, old news paper and corrugated board mixed in a blend tank of a molding machine. The bending force and moisture content of the produced tray cell pots was measured to confirm the application capability. The tray cell pot could be manufactured under the condition of over 20% of virgin pulp, 40% of old news paper added. However, the corrugated board could not be used because of the glutinous substance included. The produced tray cell pot absorbed water very easily and the bending force decreased rapidly. The waterproof material must be used to applicate the produced tray cell pot in plant growing fields.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3625-3630
• /
• 2013

도어 모듈은 모듈화의 대표적인 예로 여러 부품들은 모듈형태로 완성하여 완성차 업체의 원가절감 및 조립시간 단축, 품질 향상 등에 큰 기여를 이루었다. 주요 부품중의 하나인 Door carrier plate는 주로 steel을 이용한 press 성형이 주였으나 최근에는 PP-LFT(유리 장섬유 강화PP)를 사용한 사출 공법을 적용함으로써 형상자유도를 높혀 모듈에 부착되는 많은 종류의 부품들을 통합할 수 있게 되었으며 중량 절감을 이룰 수 있게 되었다. 하지만 사출 성형시 제품의 형상 및 gate위치 설정의 한계성과, LFT의 특성에 의하여 변형이 비교적 심해 일반적으로 시사출 진행 후 보상 가공을 진행하여 조립성을 개선한다. 이러한 사후 수정 공정은 금형의 품질 저하 및 생산원가 상승의 주요인이다. 부분적으로 사출 CAE를 적용하여 warpage정도를 예측하나 그 신뢰성 확보에 어려움을 겪고 있다. 따라서 LFT를 사용하는 Door carrier plate에 대한 해석 신뢰성을 확보할 수 있는 기법으로 hyper-mesh에서 1차 mesh작업 후 moldlfow 자체 tool을 이용하여 mesh의 두께 구현성을 높혔으며, fiber orientation해석을 위하여 ARD-RSC model을 적용하였다.

• 한국주조공학회지
• /
• 제35권4호
• /
• pp.67-74
• /
• 2015

In this study, Mg-Zn alloys are investigated in terms of their thermal properties after an addition of Cu. Al element is added to improve the mechanical properties and castability in general case. However, it was excluded here because it significantly decreases the thermal conductivity. On the other hand, Zn was added as a major element, which had less influence on reducing the conductivity and can complement the mechanical properties as well. Cu was also added, and it improved the heat transfer characteristics as the amount was increased. The composition ranges of Zn and Cu are 6 wt.% and 0~1.5 wt.%, respectively. Mg-6Zn-xCu alloy was prepared by a gravity casting method using a steel mold and then the thermal conductivity and the microstructure of the as-cast material were investigated. By measuring the density_(${\rho}$), specific heat_(Cp) and thermal diffusivity_(${\alpha}$), the thermal conductivity_(${\lambda}$) was calculated by the equation ${\lambda}={\rho}{\cdot}Cp{\cdot}{\alpha}$. As the amount of Cu increased in the Mg-6Zn-xCu alloy, the heat transfer characteristics were improved, resulting in a synergistic effect which is slow when the added Cu exceeds 1 wt.%. In order to investigate the relative thermal conductivity/emission of the Mg-6Zn-xCu alloy, AZ91 and AZ31 were experimentally evaluated and compared using a separate test equipment. As a result, the Mg-6Zn-1.5Cu alloy when compared to AZ91 showed improvements in the thermal conductivity ranging from 30 to 60% with a nearly 20% improvement in the thermal emission.

• 산업기술연구
• /
• 제24권B호
• /
• pp.89-94
• /
• 2004

This Study is results of experimental works to investigate the characteristics of vibro-compaction of crushed stones having coarse grain sizes. For testing material, crushed stone, sieved within very narrow ranges of grain size distribution, was used. Cyclic loading apparatus was used to apply cyclic loading to the specimen prepared in the mold. Tests were performed by changing the ratio of the maximum to the minimum stress, frequency and the magnitude of the maximum and the minimum stresses. Settlement of specimen due to cyclic loading was measured to analyze the compaction efficiency and sieve analysis test after cyclic loading test was also carried out to find the crushing rate of the specimen. As results of cyclic loading test, normalized settlement in terms of specimen height tends to be converged around loading cycle number of 1500. The magnitude of normalized settlement is in the range of 3.11 ~ 8.57%. The crushing rate is in the range of 4.46 ~ 8.78%. Normalize settlement and the crushing rate tend to increase with decreasing the ratio of the maximum to the minimum stresses and they tend to increase with increasing the frequency and the magnitude of the maximum and the minimum stresses for the given ratio. In conclusions, compaction rate of crushed stone is controlled by the dynamic stress (difference between the maximum and the minimum stresses) and the crushing rate is dominated by applied energy to the specimen.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.270-277
• /
• 2013

PURPOSE. This study was aimed to determine the effect of two chemically distinct denture cleansers and water on the surface hardness of acrylic and silicone based soft denture liners at various time intervals. MATERIALS AND METHODS. Two commonly used commercial resilient liner material were selected based on their chemical composition (silicone- and acrylic-based soft liners) for this investigation. 120 cylindrical specimens were made of $15mm{\times}10mm$ dimensions (according to ASTM: D-2240-64T) in a custom made metal mold. All specimens were stored in artificial saliva throughout the study. Forty specimens were cleansed daily in 0.5% sodium hypochlorite solution; forty were cleansed in sodium perborate and remaining forty specimens were daily rinsed in water. Testing was done at 1 week, 1 month, 3 months and 6 months for surface hardness using a Shore A Durometer. A mean of 3 reading for each sample was subjected to one-way ANOVA, Post Hoc test and pair-t test for statistical analysis. P values of less than 0.05 were taken as statistically significant. RESULTS. Surface hardness of all the samples was significantly higher after a period of 6 months irrespective of the cleansing treatment. Minor changes were observed between control, sodium hypochlorite and sodium perborate groups with time. Greater change was observed in surface hardness of acrylic-based soft denture liners as compared to silicone-based soft liners for all groups, as time progressed. CONCLUSION. Silicone-based soft denture liners performed significantly better in all cleansing treatments than acrylic-based soft denture liners.