• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.391-397
• /
• 2017

Recently, digital image correlation (DIC) techniques have been used to measure dynamic deformation during tensile testing. The standard tensile test method measures the average displacement of the relevant specimen to calculate the true stress-strain curve. Therefore, the validity of the true stress curve is restricted to the stress incurred within the uniform stretching interval, i.e., the maximum stress corresponds to the starting point of the necking deformation. Alternatively, if DIC is used, the effective range of the strain and strain rate can be extended to the breaking point of the tensile specimen, because of the feasibility of measuring the local strain over the entire area of interest. Because of these advantages, many optical 3D measurement systems have been introduced and used in research and industry. However, the conventional 3D measurement systems are exceedingly expensive and time consuming. In addition, these systems have the disadvantage of a very large equipment size which makes their transport difficult. In this study, a 2D image correction method employing a 2D DIC measurement method in conjunction with a numerical analysis method is developed using a smartphone. The results of the proposed modified 2D DIC method yielded higher accuracy than that obtained via the 3D measurement equipment. In conclusion, it was demonstrated that the proposed 2D DIC and calibration methods yield accurate measurement results with low time costs.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.59-64
• /
• 2012

The impact strength of material is considered the most important design factor for small and light products. Impact strength is a unique material property, thus the impact strength should not depend upon the geometry of specimen. However it varies according to specimen thickness, notching method, and notch shape. In this study, the variations of impact strength have been investigated according to thickness, notch shape, and notching method of specimen. Engineering plastics such as PC, ABS and POM have been used in this study. Experimental results showed impact strength increased as thickness decreasesd. PC showed the highest increment of impact strength when the thickness was thin. Fractured section of PC showed brittle fracture behavior when the specimen was thick. However it showed ductile fracture behavior when it was thin. The impact strength of in-mold notched specimen showed higher than that of milling notched specimen. PC showed the highest notch sensitivity among the materials used in this experiment.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.23-29
• /
• 2021

The specific strength of magnesium alloy is four times that of iron and 1.5 times that of aluminum. For this reason, its use is increasing in the transportation industry which is promoting weight reduction. At room temperature, magnesium alloy has low formability due to Hexagonal closed packed (HCP) structure with relatively little slip plane. However, as the molding temperature increases, the formability of the magnesium alloy is greatly improved due to the activation of other additional slip systems, and the flow stress and elongation vary greatly depending on the temperature. In addition, magnesium alloys exhibit asymmetrical behavior, which is different from tensile and compression behavior. In this study, a jig was developed that can measure the plane deformation behavior on the surface of a material in tensile and compression tests of magnesium alloys in warm temperature. A jig was designed to prevent buckling occurring in the compression test by applying a certain pressure to apply it to the tensile and compression tests. And the tensile and compressive behavior of magnesium at each temperature was investigated with the developed jig and DIC equipment. In each experiment, the strain rate condition was set to a quasi-static strain rate of 0.01/s. The transformation temperature is room temperature, 100℃. 150℃, 200℃, 250℃. As a result of the experiment, the flow stress tended to decrease as the temperature increased. The maximum stress decreased by 60% at 250 degrees compared to room temperature. Particularly, work softening occurred above 150 degrees, which is the recrystallization temperature of the magnesium alloy. The elongation also tended to increase as the deformation temperature increased and increased by 60% at 250 degrees compared to room temperature. In the compression experiment, it was confirmed that the maximum stress decreased as the temperature increased.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.80-87
• /
• 2022

We investigated the effects of organic acid and ultrasonication treatment in maintaining the quality of garlic during storage. Samples were exposed for 5 min to either ultrasonication at 60℃, 1% citric acid, or 0.5% fumaric acid. Presence of microorganisms and minerals, hardness, and color were compared during storage at 4℃ for 28 days. The total aerobic bacterial count remained low. No proliferation of Escherichia coli was observed after treatment with fumaric acid or ultrasonication, and mold proliferation was inhibited by ultrasonication. The mineral content of the northern type garlic was higher than that of the southern type. Exposure to fumaric acid did not result in a substantial difference in hardness until 21 days of storage, at which time there was a decrease in the L-value in each cultivation type. Our results indicate that treatment with 0.5% fumaric acid for 5 min was effective in reducing the abundance of microorganisms during storage without affecting the hardness or color in garlic.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.103-117
• /
• 2019

Under the uncertainties and the consequent turmoils of the IMF financial crisis in Korea, Hyunsung Techno was founded in 1997 on the basis of automobile press molding which is critical for the quality of automobile. Ever since, Hyunsung Techno has grown rapidly based on the domestic market; however, gradually, it had faced a stalemate in terms of the saturation, on the supply side and the growth limit, on the demand side, of the domestic molding market. Accordingly, Hyunsung pushed for a strategy to localize overseas markets and a new acquisition strategy instead of resting on the domestic mold industry's growth, and the success of these strategies enabled it to leap forward into a global company with five companies including affiliates and 70 billion won in sales. The main reason why Hyunsung Techno evolved from a small and medium-sized manufacturing company into a global businesses is due to the success of Boa Constrictor M&A strategy. Its acquisition strategy is not just a successful case of any acquisition, but a rare, maybe the first domestic case of a successful acquisition of a primary supplier by a secondary supplier. Through the success of this strategy, Hyunsung Techno has achieved a continuous growth of businesses, an increase in sales volume, and expansion into new businesses. And on top of that, this achievements is leading it to be a global conglomerate In this study, Hyunsung Techno's success strategy, which is transformed from a small domestic manufacturing company into a global enterprise, was analyzed in detail with its development stages divided into start-up, overseas expansion, acquisitions, and business diversification. Eventually, this case study is meant to offer strategic implications for other small and medium-sized businesses under the current, gloomy economy of low or zero growth of today.

• Cartoon and Animation Studies
• /
• s.22
• /
• pp.47-63
• /
• 2011

Recently, contemporary cultural contents have been shown its diversity changes followed by the birth of new media platforms with consumers' new needs in the global market. Also, developments of Internet and computer system networks are the main contributors of making this changes happened rapidly. This study aims to know that how to usefully use those new media platforms through the great example of stop-motion animation music video by analyzing its production and marketing process. The music video production had been focused to be completed with high quality by adjusting the production process economically in spite of the relatively short period(less than one month)from its crank-up to the deadline. Because the production was planned that main characters lead the whole story, the creative team had been tried to reduce the production hours by commonly use the same mold when they make original clay models by collecting the similarities of characters' appearances. By using CG technic, could overcome the visual monotonous from the similarities which inferred above. Also, the repeated rhythm in the music video, the similar scenes of backgrounds were commonly used by copy of the original scene. At the point of directing, the creative team considered both economical and art aspects for the quality work. In details, they divided the scenes into foreground and background, and removed unnecessary parts to save the production hours and budget but make depth of fields in the scenes. Except the viral marketing purposes, was searching for the methods to compensate the production cost. For this, the characters in the music video dressed the same T-shirts which are world-cup logo on, and those were designed for the sale after released the music video. Even the result of the sales was not enough to satisfied, it was estimated a great attempt to the domestic animation industry.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2008

Purpose: Plastic optical monomer materials having ultra high refractive index have an income of the whole quantity from advanced nations to domestic companies which are related to plastic optical lens. It is necessary to develop novel plastic optical lens materials in order to overcome a FTA provision and revitalize a stagnating optical lens industry in the interior optical lens industries. The new plastic optical lens materials against the substitution effect of income should be gradually demanded. This work will be synthesized novel super high refractive monomer resin materials of urethane lens series and studied the properties of optical lens using it. Methods: ETS-4 (2-(2-mercaptoethylthio)-3-{2-[3-mercapto-2-(2-mercaptoethylthio)propyl thio]ethylthio}propane -1-thiol), which is optical lens monomer resin having super high refractive index, was synthesized and identified its structure and property by elemental analysis, EI-MS, TGA, FT-IR spectroscopy, $^1H$ and $^{13}C$ NMR spectroscopies. After mixing evenly from mixed monomer resin and diisocyanate series, it was casting in glass mold. After thermal curing, the obtained optical lenses were measured and compared with the refractive index and Abbe number for studies of their optical properties. Results: We have synthesized the novel ultra high refractive index monomer resin, ETS-4, and have identified its structure and property by elemental analysis, EI-MS, TGA, FT-IR spectroscopy, $^1H$ and $^{13}C$ NMR spectroscopies. The existence of three isomers for EST-4 was identified by $^{13}C$ NMR spectroscopy. The refractive index ($N_d$ at $25^{\circ}C$) of monomer resin in liquid state obtained from the Abbe refractometer was 1.647. The refractive indexes of raw plastic optical lenses prepared from the mixed ETS-4 monomer and diisocyanate series were in the range of 1.656~1.680. Conclusions: Novel super high refractive index plastic optical lens monomer was synthesized and analysed, the optical lenses prepared using it were colorless transparency and excellent properties. It is of utility for the industrialization.