• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2044-2046
• /
• 2000

A system to monitor the ion mass and charge-state as well as plasma potential value during plasma source ion implantation (PSII) has been developed. It was tested with 30-kV PI3D setup using alternatively hot cathode do (HC) and inductively coupled RF (ICP) discharge sources. The design and performance of the system will be described, and experimental results in nitrogen and argon plasmas produced by modular HC-ICP source will be discussed.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2684-2686
• /
• 2000

This paper describes a preliminary study on a modeling technique for control performance evaluation of asynchronous TMR(Triple Modular Redundancy) controller. Hybrid system modeling is applied to TMR controller performance evaluation and mixed logical dynamical system description is used to model the behavior of majority voter in the controller. Windup and bumpless transfer problems in redundancy controls are also mentioned.

• Honam Mathematical Journal
• /
• v.32 no.1
• /
• pp.177-192
• /
• 2010

We study the concepts of congruent number problems and elliptic curves. We research the structure of the group of elliptic curves and find out a method of the computation of L($E_n$, 1) and L'($E_n$, 1) by using SAGE program. In this paper, we obtain the first few congruent numbers for n ${\leq}$ 2500.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.2047-2069
• /
• 2015

The coset diagrams are composed of fragments, and the fragments are further composed of circuits at a certain common point. A condition for the existence of a certain fragment ${\gamma}$ of a coset diagram in a coset diagram is a polynomial f in ${\mathbb{Z}}$[z]. In this paper, we answer the question: how many polynomials are obtained from the fragments, evolved by joining the circuits (n, n) and (m, m), where n < m, at all points.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.2015-2018
• /
• 2005

In this paper, we are willing to prepare the reasonable optimization, Combinatorial Optimization and Genetic Algorithm. Thus we define position status of end-effect (or terminative link module) using promised form, (G, M(G), A(G), and so on.). For this preparing step, the reorganizing procedure of Link and Joint Module is necessary, like as enumerating the kinematically identical assembly group of several links and joints. Thus, we draw a G, directed graph in a first step. Because, directed graph contains the path information between adjacent Link Module and Joint Module. From the directed graph,G, we can incite the Incidence Matrix, M(G). The incidence matrix, M(G), contains the contact information of the Link (Joint) Module and the type of Link (Joint). At the end of this paper, we generalize the modular information as a matrix form, A(G). From this matrix, we can make a population of assembly status. That is the finial output of this paper.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.4
• /
• pp.249-254
• /
• 2009

The today's decision making tasks in globalized business and manufacturing become more complex, and ill-defined, and typically multiaspect or multi-discipline due to many influencing factors. The requirement of obtaining fast and reliable decision solutions further complicates the task. Intelligent decision support system (DSS) currently exhibit wide spread applications in business and manufacturing because of its ability to treat ill-structuredness and vagueness associated with complex decision making problems. For multi-dimensional decision problems, generally an optimum single DSS can be developed. However, with an increasing number of influencing dimensions, increasing number of their factors and relationships, complexity of such a system exponentially grows. As a result, software development and maintenance of an optimum DSS becomes cumbersome and is often practically unfeasible for real situations. This paper presents a technically feasible approximation of an optimum DSS through decreasing its complexity by a modular structure. It consists of multiple DSSs, each of which contains the homogenous knowledge's, decision making tools and possibly expertise's pertaining to a certain decision making dimension. Simple, efficient and practical integration mechanism is introduced for integrating the individual DSSs within the proposed overall DSS architecture.

• International Journal of High-Rise Buildings
• /
• v.3 no.1
• /
• pp.21-33
• /
• 2014

The tied braced frame (TBF) system was developed to achieve uniform seismic inelastic demand along the height of multi-storey eccentrically braced steel frames. A modular tied braced frame (M-TBF) configuration has been recently proposed to reach the same objective while reducing the large axial force demand imposed on the vertical tie members connecting the link beams together in TBFs. M-TBFs may however experience variations in storey drifts at levels where the ties have been removed to form the modules. In this paper, the possibility of reducing the discontinuity in displacement response of a 16-storey M-TBF structure by introducing energy dissipating (ED) devices between the modules is examined. Two M-TBF configurations are investigated: an M-TBF with two 8-storey modules and an M-TBF with four 4-storey modules. Three types of ED devices are studied: friction dampers (FD), buckling restrained bracing (BRB) members and self-centering energy dissipative (SCED) members. The ED devices were sized such that no additional force demand was imposed on the discontinuous tie members. Nonlinear response history analysis showed that all three ED systems can be used to reduce discontinuities in storey drifts of M-TBFs. The BRB members experienced the smallest peak deformations whereas minimum residual deformations were obtained with the SCED devices.

• Journal of the Chungcheong Mathematical Society
• /
• v.30 no.1
• /
• pp.77-102
• /
• 2017

As an analogy of $Poincar{\acute{e}}$ series in the space of modular forms, T. Ono associated a module $M_c/P_c$ for ${\gamma}=[c]{\in}H^1(G,R^{\times})$ where finite group G is acting on a ring R. $M_c/P_c$ is regarded as the 0-dimensional twisted Tate cohomology ${\hat{H}}^0(G,R^+)_{\gamma}$. In the case that G is the Galois group of a Galois extension K of a number field k and R is the ring of integers of K, the vanishing properties of $M_c/P_c$ are related to the ramification of K/k. We generalize this to arbitrary n-dimensional twisted cohomology of the ring of integers and obtain the extended version of theorems. Moreover, some explicit examples on quadratic and biquadratic number fields are given.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.1
• /
• pp.82-88
• /
• 2017

This study proposes a new topology for the performance test of a valve consisting of a modular multilevel converter (MMC)-based static synchronous compensator (STATCOM). The conventional valve performance test equipment requires high-voltage AC source of several kV rating because the number of submodules to be tested in a valve should be at least six or eight. However, the power source of the proposed scheme is DC and not AC source. The DC power source voltage range of the proposed test circuit is from several volts to several tens of volts. Therefore, the size and cost for the performance test equipment can be reduced considerably compared with the conventional method. The proposed scheme satisfies the requirements of the IEC 62927 standard. Simulations are conducted for a valve of 50[MVA] MMC-based STATCOM. Experimental results with a scale-downed setup show the validity of the proposed performance test topology.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.427-434
• /
• 2019

Purpose: This study evaluated the long term clinical and radiographic results and the survival rates of unicompartmental knee arthroplasty (UKA). In addition, the factors affecting the survival of the procedure were analyzed and the survival curve was compared according to the affecting factors. Materials and Methods: Ninety-nine cases of UKA performed between December 1982 and January 1996 were involved: 10 cases with Modular II, 44 cases with Microloc, and 45 cases with Allegretto prostheses. The mean follow-up period was 16.5 years. Clinically, the hospital for special surgery (HSS) scoring system and the range of motion (ROM) were evaluated. Radiographically, the femorotibial angle (FTA) was measured. The survival rate was analyzed using the Kaplan-Meier method. Cox regression analysis was used to identify the factors affecting the survival according to age, sex, body mass index, preoperative diagnosis, and type of implant. The Kaplan-Meier survival curves were compared according to the factors affecting the survival of UKA. Results: The overall average HSS score and ROM was 57.7 and 134.3° preoperatively, 92.7 and 138.4° at 1 year postoperatively, and 79.1 and 138.4° at the last follow-up (p<0.001, respectively). The overall average FTA was varus 0.8° preoperatively, valgus 4.1° at postoperative 2 weeks, and valgus 3.0° at the last follow-up. The overall 5-, 10-, 15- and 20-year survival rates were 91.8%, 82.9%, 71.0%, and 67.0%, respectively. The factors affecting the survival were the age and type of implant. The risk of the failure decreased with age (hazard ratio=0.933). The Microloc group was more hazardous than the other prostheses (hazard ratio=0.202, 0.430, respectively). The survival curve in the patients below 60 years of age was significantly lower than those of the patients over 60 years of age (p=0.003); the survival curve of the Microloc group was lower compared to the Modular II and Allegretto groups (p=0.025). Conclusion: The long-term clinical and radiographic results and survival of UKA using old fixed bearing prostheses were satisfactory. The selection of appropriate patient and prosthesis will be important for the long term survival of the UKA procedure.