• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.229-236
• /
• 2005

Testing time and power consumption during testing System-On-a-Chip (SOC) are becoming increasingly important as the IP core increases in a SOC. We present a new algorithm to reduce the scan-in power and test data volume using the modified scan latch reordering. We apply scan latch reordering technique for minimizing the hamming distance in scan vectors. Also, during scan latch reordering, the don't care inputs in scan vectors are assigned for low power and high compression. Experimental results for ISCAS 89 benchmark circuits show that reduced test data and low power scan testing can be achieved in all cases.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1019-1025
• /
• 2010

This paper describes on methods in test and evaluation of the guided rocket munitions of the domestic new generation multiple launcher rocket system. We modified and refer to the present model of air-to-air missile(AAM) and surface-to-air missile(SAM). Also we suggested a method of surface-to-surface missile(SSM) based on the characteristics of the guided rocket in test and evaluation(T&E). According to this study, the suggested activity of T&E should be observed methods compatible with each item on the established model. Therefore, we expect that the proposed research material will be a good guide to the study of a surface-to-surface missile(SSM) installed GPS/INS integration navigation guidance & control systems in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.539-546
• /
• 2016

In this paper, the effect of J-R curve changes on the determination of parameters in a failure model owing to the presence or absence of a side groove in a C(T) specimen is investigated. A stress-modified fracture strain model is implemented for FE damage simulations. C(T) specimens were taken from SA508 grade 1a low-alloy steel piping material, and some of them were processed with a side groove. Fracture toughness tests were performed at room temperature and at $316^{\circ}C$. The parameters of the failure model were determined by damage simulations using the J-R curves obtained from the tests. Finally, the results show that the determination of failure model parameters is not affected by variations in J-R curves owing to the presence or absence of a side groove.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.177-186
• /
• 2009

Rumble strip was introduced in highway pavement for driver's safety in Korea on 2000. With proving its effectiveness, total length of highway with rumble strip has increased. This research team suggested a modified form of the existing rumble strip, which was placed on new concrete pavement during construction. The modified construction equipment was applied on test section at PyungTeak-Eumsung highway with some performance experiments. Through the equation of stopping sight distance proposed AASHTO, the modified form is safer than the existing one due to 0.65m of extra width. The indoor noise test showed that the modified form $3.5{\sim}9dB(A)$ noisier than the main pavement, which wasn't applied by rumble method. Therefore, it was one of alternatives to prevent sleeping. The modified form made the frequency effected on man's eye. There were no differences of the noise and vibration between modified form and existing one. However, that driver who participated on operating test on that section felt that the former was safer than the latter. It can be concluded that modified form can be applied to the new concrete pavement, that will decrease traffic accident.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.106-111
• /
• 2002

The estimation of pile bearing capacity is important since the design details are determined from the result. There are numerous ways of determining the pile design load, but only few of them are chosen in the actual design. According to the recent investigation in Korea, the formulas proposed by Meyerhof based on the SPT N values are most frequently chosen in the design stage. In the study, various static and dynamic formulas have been used in predicting the allowable bearing capacity of a pile. Further, the reliability of these formulas has been verified by comparing the perdicted values with the static and dynamic load test measurements. Also, in most cases, these methods of pile bearing capacity determination do not take the time effect consideration, the actual allowable load as determined from pile load test indicates severe deviation from the design value. The principle results of this study are summarized as follows : As a result of estimate the reliability in criterion of the Davisson method, t was showed that Terzaghi & Peck >Chin>Meyerhof > Modified Meyerhof method was the most reliable method for the prediction of bearing capacity. Comparisons of the various pile-driving formulas showed that Modified Engineering News was the most reliable method. However, a significant error happened between dynamic bearing capacity equation was judged that uncertainty of hammer efficiency, characteristics of variable, time effect etc... was not considered. As a result of considering time effect increased skin friction capacity higher than end bearing capacity. It was found out that it would be possible to increase the skin friction capacity 1.99 times higher than a driving. As a result of considering 7 day's time effect, it was obtained that Engineering news, Modified Engineering News, Hiley, Danish, Gates, CAPWAP(CAse Pile Wave Analysis Program) analysis for relation, repectively, $Q_{u(Restrike)} / Q_{u(EOID)} = 0.98t_{0.1}$ , $0.98t_{0.1}$, $1.17t_{0.1}$, $0.88t_{0.1}$, $0.89t_{0.1}$, $0.97t_{0.1}$.

• 한국노년학
• /
• v.30 no.3
• /
• pp.815-830
• /
• 2010

This study is a nonequivalent control group pretest-posttest study to determine the effects of a make up program on the self-esteem and anxiety of the elderly female dementia patients. This research was done between April 13th and May 1st, 2009. The subjects were 41 dementia patients in an elderly hospital in Honam Area. Twenty dementia patients in the experimental group got the make up measures during the two week experimental period and twenty one dementia patients in the contrast group didn't get any measure during the two week period. Make up measures were given to the experimental group 10 times for the two week period. This study used the self-esteemscale which was developed by Rosenberg(1965) and was translated and modified by Jeon Pyung Je(1974) into Korean. The anxiety status scale which this study used was developed by Spielberger(1970) and was translated and modified by Kim Jeong Taek(1991) into Korean. Collected data were analyzed with SPSS Win 12.0. T-test and multivariate analysis were done to test the hypothesis. This study also used a method of observation. The results of this study are following. After the two week make up measures, the experimental group had more self esteem and less anxiety status than the contrast group. The differences were statistically significant. The result of the observation also supported the research hypothesis. Based on this result, we suggest the make up program as an appropriate and useful nursing care intervention program for female dementia patients.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.4
• /
• pp.646-652
• /
• 2010

Gambejaeseup-tang (GBJST) have recently been used as an anti-obesity herbal medicine but their effect and mechanism of action have not been studied. We modified ingredients of GBJST based on the previous experiments about exploring herbs to suppress triglyceride accumulation in 3T3-L1 adipocytes. We investigated the effects of modified GBJST on energy, glucose and lipid homeostasis using female rats with diet-induced obesity and their action mechanism was also determined. Rats fed a high-fat diet (HFD) were divided into 3 groups: rats in each group received 0.2 or 2 g water extracts of modified GBJST (L-GBJST or H-GBJST) or 2 g cellulose per kg body weight (a negative control) on a daily basis. A further group was fed a low-fat diet (LFD) as a positive control. We found that modified GBJST dose-dependently decreased body weight and mesenteric and retroperitoneal fat more than the control. This decrease was due to the reduction in energy intake and the increase of energy expenditure. HFD increased fat oxidation more than LFD and modified GBJST further increased fat oxidation as a major energy source more than the control in a dose-dependent manner. In addition, H-GBJST improved glucose tolerance without changing serum insulin levels during an oral glucose tolerance test. H-GBJST also suppressed the increase of serum total and LDL cholesterol and triglyceride levels by HFD. In conclusion, modified GBJST have a good anti-obesity effect by decreasing energy intake and increasing energy expenditure mainly as fat in female rats with diet-induced obesity. It also improves glucose tolerance and lipid metabolism.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.403-414
• /
• 2001

The purpose of this study was to evaluate treatment effects of the modified Teuscher appliance (MTA) in early Class II division 1 malocclusion. For this purpose, treatment effects of the bionator were compared with those of the MTA. The twenty subjects who were treated excellently with bionator and MTA were selected in each group. In pre- and post-treatment lateral cephalograms, 50 variables were measured, and then the differences between pretreatment and posttreatment data of the bionator and the MTA were statistically evaluated by t-test. The results were as follows : 1. The linear measurements that showed large difference between the bionator group and the MTA group are U1 to FH, U1 to PP, U6 to FH, U6 to PP, Ar-Pog, ramus height, L1 to A-Pog, L1 to facial plane (p<0.05). 2. The angular measurements that showed large difference between the bionator group and the MTA group are SNB, SNA, FABA, APDI (p<0.05). 3. The measurements of the growth pattern such as facial height ratio, FMA, SN-MP angle showed no difference between two groups (p>0.05). These results suggest that the bionator influence the mandiblar growth and lower dentoalveolar structures more than the MTA, and the MTA influence upper jaw and upper dentoalveolar structures more than the bionator comparatively in early Class II division I malocclusion.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.291-298
• /
• 2020

PURPOSE. The aim of this study is to evaluate the influence of repeated surface treatments on wettability and surface roughness for zirconia surface and bond strength of zirconia-based ceramics to resin cement. MATERIALS AND METHODS. Seventy blocks (10 × 10 × 3 mm) of zirconia-based ceramics were fabricated and divided into two groups according to the surface treatments: (A) 110 ㎛ Al₂O₃ airborne-particle abrasion and (R) 110 ㎛ silica modified Al₂O₃ airborne-particle abrasion. At stage 2, each group was subdivided into 5 groups according to the surface retreatments: (a) 110 ㎛ Al₂O₃ airborne-particle abrasion, (r) 110 ㎛ silica modified Al₂O₃ airborne-particle abrasion, (D) diamond bur, (Da) diamond bur + 110 ㎛ Al₂O₃ airborne-particle abrasion, and (Dr) diamond bur + 110 ㎛ silica modified Al₂O₃ airborne-particle abrasion. Cylinders of self-adhesive resin cement were cemented onto each treated ceramic surface and subjected to micro-shear bond strength test. Additional specimens were prepared for roughness and wettability analyses. The data were subjected to t-test and One-way ANOVA followed by Tukey's post hoc test (α=.05). RESULTS. At stage 1, group R presented higher bond strength values than group A (P=.000). There was a statistically significant increase of bond strength at stage 2 for group A (P=.003). The diamond bur influenced the surface roughness, increasing the values (P=.023). Group R provided better wettability. Regardless of the applied surface treatment, most of failures were adhesive. CONCLUSION. The combination of application and reapplication of Rocatec Plus showed the best results of bond strength. Surface retreatment and recementation might be an indicated clinical strategy.

• Women's Health Nursing
• /
• v.7 no.2
• /
• pp.157-168
• /
• 2001

The purpose of this study was to investigate of the relationship of the urinary incontinence, menopausal symptom and life satisfaction in middle aged women. The subjects of this study were 235 middle aged women, living in M city, during the period from June 21 to August 31, 2000. The instruments for this study were the urinary incontinence modified and adding by Lee Young Sook(1994), the menopausal symptom developed by Song Ae Ri and Chung Eun Soon(1998) and the life satisfaction translated and modified by Suh Kyung Hee(1988). Collected data were analyzed using descriptive statistics, t-test, ANOVA, Pearson correlation coefficients and stepwise multiple regression with SAS package. The result of this are as follows : 1. The total mean score of urinary incontinence was $1.56{\pm}0.58$ with a range of 0 to 4. The mean score on the menopausal symptom was $2.05{\pm}0.43$ with a range of 1 to 4. The mean life satisfaction score was $1.14{\pm}0.41$ with a range of 0 to 2. 2.General characteristics ralated to urinary incontinence were age and numbers of children (F=7.66, p=0.000, F=2.86, p=0.037). General characteristics ralated to menopausal symptom were age (F=7.37, p=0.000), occupation (t=5.33, p=0.021), problem of children (t=6.46, p=0.011) and marital satisfaction (F=5.65, p=0.004). General characteristics ralated to life satisfaction were type of housing (t=12.06, p=0.000), problem of children (t=6.96, p=0.008) and marital satisfaction (F=18.86, p=0.000). 3.The urinary incontinence and menopausal symptom were correlated positively (r=.235, p=.000). The urinary incontinence and life satisfaction were correlated negatively (r=-.114, p=.007). The menopausal symptom and life satisfaction were correlated negatively (r=-.277, p=.000). 4.The menopausal symptom, type of housing and marital satisfaction explained 16.6% of the variance for life satisfaction in the middle aged women.