• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.290-296
• /
• 2020

We investigated the effect of the modified starch [physical treatment, acetate (SA-1, SA-2, and SA-3), hydroxypropyl (HS), and acetylated distarch adipate] content on the physicochemical properties of fish cakes, called Eomuk in Korea, during storage at -20℃. When wheat flour (native starch, NS) was used, the moisture content decreased during frozen storage, resulting in a lower water-holding capacity and higher expressible drip. Compared with NS, adding modified starch had a lower effect on the moisture content during frozen storage. The water-holding capacity and expressible drip differed with the type of modified starch added. The expressible drip was lowest with HS; the SA-3 and HS modified starch were whiter than NS. Therefore, HS and SA-1 are suitable additives to improve the quality of frozen fish cakes.

• Composites Research
• /
• v.35 no.6
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.3
• /
• pp.474-483
• /
• 2015

The textural properties of breads containing midified starches such as pregelatinized waxy corn starch, acetylated potato starch and hydroxypropylated tapioca starch, were investigated to determine the optimum addition level of modified starches. Effects of modified starches on dough properties were investigated through a farinogram and amylogram based on the different additional levels of modified starches (3%, 6%, 9%, 12% and 15% of flour content). Moisture contents and firmness values were measured to investigate the degree of retrogradation at 0 h, 36 h and 72 h after production. The levels of moisture contents were highest upon addition of pregelatinized waxy corn starch followed by acetylated potato starch and lowest upon addition of hydroxypropylated tapioca starch. Overall, higher moisture contents resulted in lower firmness levels. The preference scores by type of modified starch were highest upon addition of 9% hydroxypropylated tapioca starch, 3% pregelatinized waxy corn starch, and 6% acetylated potato starch, respectively. Preference scores were significantly correlated with textural properties such as volume, absorption, stability and weakness (p<0.01).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.2_3
• /
• pp.59-65
• /
• 2010

Starch was modified with epichlorohydrin(ECH) to improve the miscibility with LDPE and LLDPE. Native starch or epichlorohydrin treated starch was mixed with grycerol and LDPE/LLDPE resin using a kneader and extruded using a single screw extruder to make pallets. The pallets were compression-molded at 145 into composite boards to evaluate their color, oxygen permeation, mechanical and thermal properties, and degradability under UV irradiation. Sheets with epichlorohydrin treated starch generally showed higher L-value than that of native starch blend sheets. The hunter b-values in both native starch blends and epichlorohydrin treated starch blends increased with Increasing starch contents. Tensile strength and percent elongation of sheets decreased with increasing starch contents. Tensile strength and percent elongation of sheets decreased with increasing starch contents. The degradability of blends under UV radiation increased with increasing starch contents in both blend types. The results represents that crosslinking of starch with epichlorohydrin may be a good method to improve miscibility of starch with petroleum-based materials.

• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1145-1149
• /
• 2009

Physicochemical properties of native and acid-modified Job's tears (Coix lachryma-jobi L.) starches were investigated. Starch extracted from Job's tears was treated with 2.2 N hydrochloric acid for different length of time (3, 6, 12, and 18 hr). The hydrolysis pattern of starches with the acid proceeded rapidly up to 12 hr and then the approached constant values. The swelling power of acid-modified starches measured at all temperatures was lower than that of its native counterparts and the water solubility index increased as temperature and hydrolysis time increased. Rapid visco analyzer viscograms of acid-modified starches demonstrated a very low viscosity as compared with that of native starch. However, Xray diffraction did not show any significant alteration in the crystallinity after acid-modification.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.755-760
• /
• 2008

The aim of this study was to produce resistant starch preparations from acid-modified com starches prepared at various hydrolysis levels (0.5-4.0 hr). Effect of autoclaving cycles on resistant starch (RS) formation was investigated. Molecular weight distribution, pasting and functional properties of acid-modified com starches were determined. For RS formation native and acid-modified starch samples were gelatinized and autoclaved (1 or 2 cycles). While native and acid-modified starches did not contain any RS, the levels increased to 9.0-13.5% as a result of storage at $95^{\circ}C$ after first autoclaving cycle. Second autoclaving cycle together with storage at $95^{\circ}C$ brought final RS contents of the samples incubated at 4 and $95^{\circ}C$ after the first cycle to comparable level. As acid modification level increased, the amount of high molecular weight fractions decreased, resulting in significant decreases in viscosities (p<0.05). The samples produced in this study had low emulsion stability and capacity values.

• Preventive Nutrition and Food Science
• /
• v.4 no.3
• /
• pp.175-179
• /
• 1999

To develop a production method for modified starches with less pollution, pH adjustment and gamma irradiation were applied to commerical corn starch. Blue values were significantly decreased , while alkali number, optical transmittance and solubility markedly increased when gamma irradiation was applied to pH 2 adjusted corn starch. Water binding capacity and swelling power at pH 5 were the highest among the samples. Gelatinization viscosity was considerably affected by gamma irradiation and pH of the starch. Gamma irradiation of pH 2 adjusted starch showed the lowest peak viscosity and the best cooling stability among the tested samples . Therefore, the production of modified starch with low viscosity as well as with sufficient viscosity stability seems feasible by controlling the pH of the starch and gamma irrdiation.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.638-643
• /
• 1994

Gelatinization and retrogradation properties of modified starches which were prepared by steeping sweet potato at $40^{\circ}C$ for 2, 4, 7 and 10 days were investigated. The peak temperature of gelatinization and enthalpy of untreated starch by DSC were $53.9^{\circ}C\;and\;1.32\;cal/g$, respectively, but those of modified starch were increased by steeping. In gelatinization by alkali, starches with 2, 4 and 7 day steeping showed higher viscosities than untreated starch, whereas the viscosities of starches with 10 day steeping decreased. The clarities in paste decreased during storage in all starches and decreased in starches with steeping. The degrees of retrogradation by ${\alpha}-amylase-iodine$ method were higher in starches with steeping than untreated starch. The enthalpy of retrograded starches by DSC increased by steeping except 4 day steeping starch. The sweet potato extract containing sugar inhibited the retrogradation of starch paste and the degree were higher in residual starches than in untreated starch.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.160-166
• /
• 2007

This study was performed to analyze the molecular structural and physical properties changes of modified rice starch, which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of rice starch after pulverization decreased 20% and increased 25%, respectively. Low molecular substances content in rice starch using GPC (gel permeation chromatography) increased from 36.5% to 59.5% after pulverizing of rice starch. Damaged starch contents in rice starch also increased from 16.4% to 99.2% after pulverizing of rice starch. Water holding capacity, solubility and transmittance of rice starch after pulverization increased compared to those of control. Apparent viscosity value of rice starch after pulverization decreased to 7% in control based on $30^{\circ}C$ and 20 RPM conditions.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.3
• /
• pp.265-270
• /
• 1999

The stabilization of Aspergillus sp. $\alpha$-amylase was attained by modification with periodate-oxidized sol-uble starch. The pH stability of modified enzyme was increased at pH 3~4 and 9~11 in the presence of $\alpha$-cyclodextrin($\alpha$-CD) compared with that of native enzyme. Thermal stability of the modified enzyme was increased. After treatment at 6$0^{\circ}C$ for 30min the activity remained 20% for the enzyme modified at pH 9.7 in the presence of $\alpha$-CD and tested in the presence of $\alpha$-CD 10% for the enzyme modified at pH 9.7 in the presence of $\alpha$-CD 0% for the native enzyme. The native enzyme and modified enzyme showed one peak in HPLC. The substrate specificity of the modified enzyme was not changed in HPLC analysis of reaction product.