• 제목/요약/키워드: model pile tests

검색결과 307건 처리시간 0.026초

지진하중을 받는 말뚝 시스템의 고유 진동수 예측 (Prediction of the Natural Frequency of a Soil-Pile-Structure System during an earthquake)

  • 양의규;권선용;최정인;김명모
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.976-984
    • /
    • 2009
  • This study proposes a simple method that uses a simple mass-spring model to predict the natural frequency of a soil-pile-structure system in sandy soil. This model includes a pair of matrixes, i.e., a mass matrix and a stiffness matrix. The mass matrix is comprised of the masses of the pile and superstructure, and the stiffness matrix is comprised of the stiffness of the pile and the spring coefficients between the pile and soil. The key issue in the evaluation of the natural frequency of a soil-pile system is the determination of the spring coefficient between the pile and soil. To determine the reasonable spring coefficient, subgrade reaction modulus, nonlinear p-y curves and elastic modulus of the soil were utilized. The location of the spring was also varied with consideration of the infinite depth of the pile. The natural frequencies calculated by using the mass-spring model were compared with those obtained from 1-g shaking table model pile tests. The comparison showed that the calculated natural frequencies match well with the results of the 1-g shaking table tests within the range of computational error when the three springs, whose coefficients were calculated using Reese's(1974) subgrade reaction modulus and Yang's (2009) dynamic p-y backbone curves, were located above the infinite depth of the pile.

  • PDF

1-g 진동대 모형시험을 위한 상사법칙의 적용성 평가 (Applicability of Similitude Laws for 1-g Shaking Table Tests)

  • 황재익;김성렬;김명모
    • 한국지반공학회논문집
    • /
    • 제20권3호
    • /
    • pp.141-150
    • /
    • 2004
  • 1995년 고베지진에 의해 피해를 입었던 중력식 안벽구조물과 잔교식 안벽구조물의 동적 거동을 재현하고, 분석하기 위하여 소규모 1-g 진동대 모형시험을 수행하였다. 1989년 Iai가 제안한 상사법칙을 이용하여 진동대 모형시험 결과를 원형크기의 것으로 환산하여 현장계측 결과와 비교하였다. 그 결과, 중력식 안벽구조물의 변위는 현장계측 결과의 약 1/3 정도 발생하였고, 벽체의 변형 형상은 원형과 유사하였다. 잔교식 안벽구조물의 변위는 현장계측 결과의 약 2/3 가 발생하였고, 말뚝에 발생하는 최대모멘트의 위치와 원형말뚝의 파괴위치는 잘 일치하였다.

원심모형실험에 의한 모래다짐말뚝의 지지력 산정식 연구 (A Study on Estimation of Bearing Capacity of Sand Compaction Pile by Centrifuge Model Tests)

  • 유남재;홍영길;전상현;김경수
    • 산업기술연구
    • /
    • 제27권A호
    • /
    • pp.121-130
    • /
    • 2007
  • Centrifuge model tests were performed to find appropriate equations proposed previously of estimating the bearing capacity of the composite clayey soil reinforced with sand compaction pile. Model tests were carried out with changing the replacement ratio of SCP (20%, 40%, 70%), contents of fine materials (5%, 10%, 15%) and ratio of treated width to loading width (1B, 2B, 3B). Test results about bearing capacity of the composite ground were obtained by performing the surcharge load tests with measurements of applied loads and vertical displacement. Bearing capacities against bulging and shear failures were estimated by the existing equations. As results of comparing the estimated bearing capacity with experimental values the bearing capacities estimated by Greenwood's equation (1970) for bulging failure mode were similar to the test results.

  • PDF

단일말뚝 형태의 모형시험을 통한 SCP와 GCP의 극한지지력 비교 (Comparison of Bearing Capacity between SCP and GCP by Unit Cell Model Tests)

  • 김병일;이승원;김범상;유완규
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.41-48
    • /
    • 2004
  • 이 연구에서는 아직 국내에서는 시공실적이 없는 쇄석다짐말뚝(Gravel Compaction pile)공법의 적용성을 판단하기 위하여 SCP와 GCP의 모형토조시험을 수행하였다. 즉, 원통형 압밀상자(지름 20cm, 높이 40cm)에 치환율 30, 40, 50, 60, 70%로 달리 조성하여 원심력 압밀시험기를 이용하여 압밀시킨 후, 재하시험을 통하여 두 공법의 지지력 특성을 비교 검토하였다. 또한 모형시험을 통해 얻어진 극한지지력을 기존에 제안된 SCP 및 GCP 시공지반의 극한지지력 산정식을 이용한 계산값과 비교하였다. 모형시험 결과 GCP 시공지반이 SCP 시공지반에 비해 지지력 측면에서 더 우수한 것으로 나타났다.

하중전이기법을 이용한 매입말뚝의 하중-침하 거동특성 (Characteristics of Load-Settlement Behaviour for Embeded Piles Using Load-Transfer Mechanism)

  • 오세욱
    • 한국지반환경공학회 논문집
    • /
    • 제2권4호
    • /
    • pp.51-61
    • /
    • 2001
  • 본 논문에서는 지반의 상대다짐도(RC)와 매입말뚝의 근입비에 따른 하중-침하 거동을 연구하기 위하여 모형실험과 하중전이 함수를 이용한 해석을 수행하였다. 모형시험에서 말뚝은 근입비(L/D)를 15, 20, 25로 설치하였고, 지반의 상대다짐도를 85%, 95%로 각각 조성하였으며 말뚝주면은 시멘트를 주입하였다. 본 논문은 매입말뚝의 해석을 위하여 Vijayvergia의 하중전이 모델, Castelli 모델, Gwizdala의 탄소성-완전소성 모델, coyle의 제안식 등을 사용하여 실험결과와 비교하였으며, 매입말뚝의 하중-침하 거동을 예측하는데 가장 적합한 하중전이 방법을 제안하였다. 하중전이 함수에 의한 지지력 예측 결과 매입말뚝의 극한 지지력은 Coyle의 제안식이 실측값에 가장 근접한 것으로 나타났으며, 초기 하중-침하 거동은 Castelli에 의한 함수가 가장 유사하게 하중-침하 거동을 평가하는 것으로 나타났다. 매입말뚝의 축하중 해석결과 하중전이법에 의해 평가된 주면마찰력이 실측값보다 과소평가 되는 것으로 나타났다.

  • PDF

단독캡을 사용한 성토지지말뚝에 대한 모형실험 (Model Tests on Embankment Piles with Isolated Pile Caps)

  • 홍원표;이광우
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.49-59
    • /
    • 2003
  • 성토지지말뚝의 하중분담효과에 영향을 미치는 요소는 크게 말뚝에 관한 요소와 지반에 관한 요소로 구분할 수 있다. 우선 말뚝에 관한 요소로는 말뚝캡간격비를 들 수 있으며, 지반에 관한 요소는 성토고와 지반정수(c, $\phi$)를 들 수 있다. 본 연구에서는 이들 영향요소들이 성토지지말뚝의 하중분담효과에 미치는 영향정도를 평가하고, 기 제안된 이론식의 타당성을 입증하기 위하여 일련의 모형실험을 수행하였다. 본 모형실험에서 말뚝은 성토지반아래에 6행$\times$6 열(혹은 5행$\times$5열)의 정방형으로 설치하였으며, 각각의 말뚝 두부에 2.5cm$\times$2.5cm 크기의 단독캡을 설치하였다. 실험 결과 성토지지말뚝의 연직하중분담 효과는 말뚝캡 간의 간격이 커질수록 감소하였고, 반면에 성토고가 높아질수록 그리고 성토지반의 상대밀도를 크게 조성할수록 증가하였다. 또한 실험치와 이론치의 비교결과, 제안 이론식이 성토지지말뚝에 작용하는 연직하중을 합리적으로 잘 산정함을 확인하였다.

사질토 지반에서 말뚝의 수평거동 (Lateral Behavior of Sin811e and Group Piles in Sand)

  • 김영수;김병탁
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.3-44
    • /
    • 1999
  • This paper discusses the lateral behavior of single and group piles in homogeneous and non-homogeneous(two layered) soil. In the single pile, the model tests were conducted to investigate the effects on ratio of lower layer height to embedded pile length, ratio of soil modules of upper layer to lower layer, boundary rendition of pile head and tip, embedded pile length, pile construction condition, ground condition with saturate and moisture state in Nak-Dong river sand. Also, in the group pile, the model tests were to investigate the effects on spacing-to-diameter ratio of pile, pile array, ratio of pile spacing, boundary condition of pile head and tip, eccentric load and ground condition. The maximum bending moment and deflection induced in active piles were found to be highly dependent on the relative density, pile construction condition, boundary condition of pile head and tip. Based on the results obtained, it was found that the decrease of lateral bearing capacity in saturated sand was in the range of 31% - 53% as compared with the case of dry sand. Also, in the group pile, a spacing-to-diameter of 6.0 seems to be large enough to eliminate the group effect for the case of relative density of 61.8%, and 32.8%, and then each pile in such a case behaves essentially the same as a single pile. In this study, the program is developed by using the modified Chang method which used p - y method and the exact solution of governing equation of pile and it can be used to calculate the deflection, bending moment and soil reaction with FDM in non-homogeneous soil. In comparing the modified Chang method with field test results, the predict results shows better agreement with measured results in field tests.

  • PDF

토목섬유보강 성토지지말뚝시스템에서의 하중전이 효과에 관한 모형실험 (Laboratory Model Tests on the Load Transfer in Geosynthetic-Reinforced and Pile-Supported Embankment System)

  • 홍원표;이재호
    • 한국지반신소재학회논문집
    • /
    • 제9권3호
    • /
    • pp.9-18
    • /
    • 2010
  • 토목섬유보강 성토지지말뚝시스템에서의 하중전이 특성을 규명하기 위하여 일련의 모형실험을 실시하였다. 모형토조에 단독캡 말뚝을 설치하고, 토목섬유를 포설한 후 성토를 실시하였다. 연약지반 대체재료로서 스펀지고무를 사용하였다. 실험결과 성토지지말뚝시스템의 효율은 일정한 말뚝간격비에서는 성토고가 증가할수록 비선형적으로 증가하여 이후 일정한 값에 수렴하는 경향을 나타내었다. 또한 성토고가 일정한 조건에서는 말뚝간격비가 증가할수록 효율의 크기는 감소하였다. 토목섬유를 보강한 경우, 무보강시와 비교하여 말뚝으로 전이되는 하중이 증가하는 것으로 나타났다. 이는 토목섬유의 보강이 연약지반의 거동을 억지하는데 효과가 있음을 나타내는 것이다. 결국 토목섬유보강 성토지지말뚝시스템에서의 하중전이 특성은 말뚝캡 설치간격, 성토고, 지반의 강도정수 및 토목섬유 강성 등에 복합적으로 영향을 받음을 알 수 있다.

  • PDF

Piled Raft 거동특성에 관한 실험적 연구 (An Experimental Study on Behavior for the Piled Raft)

  • 권오균;이승현;오세붕;임종석;이활
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 기초기술학술발표회
    • /
    • pp.77-89
    • /
    • 2002
  • To analyze a bearing capacity for pile groups, a number of model tests have been done and theoretical methods studied. In the case of design of group pile bearing capacity is calculated with only pile capacity. But uncertainty of bearing capacity and behavior of foundation cap(raft) leads to conservative design ignoring bearing effects of foundation cap. In the case of considering bearing capacity of foundation cap, the simple sum of bearing capacity of foundation cap and pile groups cannot be the bearing capacity of total foundation system. Since cap-pile-soil interaction affects the behavior of pile groups. Thus, understanding cap-pile-soil interaction is very important in optimal design. In this paper, the piled raft behavior is studied through model tests of 2$\times$2, 2$\times$3, 3$\times$3 pile group. Changes of behavior of pile group foundation by touching effects of foundation cap with soil are studied. Also changes of spacing between piles. Foundation cap is made of rigid steel plate and piles are made steel pipes. From this model tests, the changes of behavior changes of pile groups by touching effects of foundation cap with soil are studied.

  • PDF

Single piles under cyclic lateral loads - Full scale tests and numerical modelling

  • Hocine Haouari;Ali Bouafia
    • Geomechanics and Engineering
    • /
    • 제32권1호
    • /
    • pp.21-34
    • /
    • 2023
  • In order to analyze the effect of the cyclic lateral loading on the response of a pile-soil system, a full-scale single steel pile was subjected to one-way cyclic loading. The test pile was driven into a bi-layered soil consisting of a normally consolidated saturated clay overlying a silty sandy layer, the site being submerged by water up to one meter above the mudline in order to reproduce the conditions of an offshore pile foundation. The aim of this paper is to present the main results of interpretation of the cyclic lateral tests in terms of pile deflections, bending moment, and cyclic P-Y curves. From these latter an absolute secant reaction modulus EAS,N was derived and a simple calculation model of the test single pile is proposed based on this modulus. Two applications of the proposed model are carried out, one with a 2D finite element modelling, and the second with a load transfer curves-based method.