• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1834-1846
• /
• 2020

The SMART (System-integrated Modular Advanced ReacTor) is an integral-type small modular reactor developed by KAERI (Korea Atomic Energy Research Institute). This paper discusses the development of a dynamic equivalent model of the SMART control rod drive mechanism that can be efficiently utilized for complicated analysis during the design of the SMART. A semi-empirical approach is used to develop the equivalent model; that is, the equivalent model is defined analytically and verified empirically. Two types of tests, dynamic characteristics tests and seismic loading tests, are conducted for the development and verification of the dynamic equivalent model, respectively. Acceleration response spectra from the seismic analysis based on the developed equivalent model show good agreement with those from the seismic loading tests.

• 한국환경복원기술학회지
• /
• 제12권3호
• /
• pp.59-71
• /
• 2009

The goals of this study were to development Natural Ecosystem Value Assessment Model, to suggest the practical applicability of the Natural Ecosystem value assessment for development areas, and to assess natural ecosystem quantitatively using GIS. The Model can evaluate Natural Ecosystem Value between before and after land developments. To select indicators for the model, we conducted the literature reviews. and six indicators and the standard of evaluation had been developed through the expert interviews and literature reviews. the relative importance of the evaluation index throught two times expert questionnaires was found out. the Natural Ecosystem Value Assessment Model has been established, The results demonstrate that although the suggested six indicators are arranged by priority, to maintain quantitative and qualitative the natural ecosystem value, all indicators are desirable to be maintained complementarily. The findings of this study suggest that the natural ecosystem value assessment model appears to be effective an assessment for damaged natural environment value and possible to assign a score value. Also, this model can be applied to research areas and has implications to help maintain the natural ecosystem in land development districts.

• 한국응용곤충학회지
• /
• 제56권1호
• /
• pp.1-18
• /
• 2017

곤충의 온도발육모형은 해충의 발생예찰모형을 비롯한 개체군모형에서 기본이 되는 요소이다. 본고에서는 곤충의 온도의존적 비선형 발육모형에 대하여 고찰하였다. 모형의 종류를 크게 경험모형과 생물리적 모형으로 구분하였으며, 수식의 유사성 내지 기원에 대한 유연관계에 따라 세분하였다. 발육률 곡선의 형태적 묘사에 적합한 수식을 적용하는 경험모형은 Stinner-계열, Logan-계열, 수행모형, 그리고 베타 분포모형으로 세분화하여 고찰하였다. 촉매반응을 바탕으로 하고 있는 생물리적 모형은 Eyring-모형, SM-모형, SS-모형, SSI-모형으로 이어지는 단계통으로 분류하였다. 본 연구에 포함된 각 모형의 개발과정과 형태적합 특성에 대하여 기술하였다.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.276-283
• /
• 2024

Currently, the overall tendency for green and sustainable economic development is creating a circular economy. In actuality, agricultural output is currently benefiting greatly from the growth of the circular economy. The creation of a circular economy helps address resource scarcity, save the environment, combat climate change, and increase economic efficiency. Vietnam's economy can grow quickly and sustainably by shifting to a circular economy production model. Comparing prior growth techniques to the digital age and implementing circular economic development connected with high technology will be a fantastic opportunity to boost growth efficiency. In actuality, Vietnam currently has a large number of agricultural circular economy models. These are models: Creating and using gas from waste and wastewater in livestock and farming; model combining cultivation, livestock, and aquaculture; agro-forestry model; garden-forest model; Circular model using agricultural by-products as a catalyst or creating other valuable products; model of moderation, linked to reducing the use of growth hormones, veterinary medications, pesticides, and artificial fertilizers in agriculture and animal husbandry. Unfortunately, there have been few studies and applications of the aforementioned models, which has made it difficult to build the agricultural sector sustainably. In this paper, we outline the current situation and propose solutions to develop a circular economy model in agriculture in Vietnam for sustainable development.

• 한국정보통신학회논문지
• /
• 제26권9호
• /
• pp.1412-1422
• /
• 2022

무기체계 간 상호운용성의 중요성이 점점 커지고 있다. 체계 간 상호운용성은 주로 자료 연동을 통해 구현된다. 그런데 체계 간 정보 이질성 해소 비용으로 인해 전군 차원의 자료 연동 효율과 품질이 저하되고 있다. 다른 선진국들은 정보교환모델을 공통 적용함으로써 자료 연동 구현의 효율과 품질을 높이고 있지만 한국군은 아직 그에 대한 중요성과 필요성을 충분히 인식하지 못하고 있다. 이 연구는 한국 지휘통제 정보교환모델(KC2IEM)의 개발과 적용의 필요성을 설명하고, 그에 필요한 개발 방법론을 제시하고 프로토타입 모델 개발을 통해 검증하고 개선한다. 정보교환모델의 완성은 학술연구 수준에서는 제한되며, 이 연구는 후속 연구 및 개발을 위한 계기와 발판으로서 기여한다.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.163-170
• /
• 2016

Tropospheric delay is one of the largest error source in pseudolite navigation system. Because a pseudolite is installed on the ground and transmits its signal to a user in the air or on the ground, the conventional tropospheric delay model developed for a satellite navigation doesn't work properly. In this paper, performance analysis of several pseudolite tropospheric delay models has been done using meteorological data. Based on the result, a new compensation method for Hopfield model has been proposed.

• 드라이브 ㆍ 컨트롤
• /
• 제16권1호
• /
• pp.22-28
• /
• 2019

This paper develops ABS braking real - time simulator to develop vehicle braking system by simulation. Recently, real-time simulation is widely used in the development of vehicles to decrease development time. In the field of electronic braking, real-time simulation is actively underway. In order to simulate electronic braking model in real time, a vehicle model, a hydraulic model, and a control S/W model are required. These models must be calculated in one platform. Therefore, in this paper, a vehicle model composed of CarSim and a hydraulic model composed of SimulationX using S/W in actual ABS controller was developed as a Simulink model base and linked with Matlab real time model. Using this real-time model, design effects of the electronic braking controller were simulated according to road surface condition to verify its operability.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권5_6호
• /
• pp.515-528
• /
• 2003

컴포넌트 기반 소프트웨어 개발 방법은 새로운 패러다임으로 인식되고, 활발한 연구가 진행되고 있다. 그러나 컴포넌트 기반 개발에서 컴포넌트의 재사용성과 효율적인 소프트웨어 개발을 보장하기 위해서는 소프트웨어 아키텍처를 기반으로 한 개발이 필요하다. 본 논문에서는 컴포넌트 기반 소프트웨어 개발을 지원하기 위해, Kruchten이 제시한 4+1 뷰 모델을 기반으로 재 정의한 컴포넌트 기반 4+1 소프트웨어 아키텍처 뷰 모델을 제안한다. 또한 뷰 모델의 요소와 UML을 이용한 뷰 모델 요소의 표현을 제시한다 이 아키텍처는 컴포넌트의 사용문맥을 각 뷰에 반영함으로써 소프트웨어에 대한 이해와, 컴포넌트의 상호 작용에 대한 정보 등 컴포넌트 기반 소프트웨어 구성에 대한 틀을 구성한다.

• 기술혁신연구
• /
• 제13권1호
• /
• pp.247-263
• /
• 2005

Prior research in R8ED innovation in Korea has been centered around the 'three-stage development model,' which hypothesizes that the Korean innovation process goes from the introduction (of foreign technology) stage, through assimilation stage to the final modification stage. As Korean economy shifts from traditional industry-led development to innovation-centric development, such an approach loses sight of the whole picture. The current study argues that a new framework is required for adequate analysis on newly arising innovative patterns in Korea, emphasizing source technology development and technology leader strategy. For this purpose, we propose the 'Jigsaw Puzzle Model' of technology development, which is then verified by an in-depth analysis on the innovation processes of 3 representative IT products of Korea, DRAM, TH LCD, and CDMA. The model suggests that Korean innovation model is a dynamic, efficient amalgamation of foreign-acquired and dependent technologies, based on internally accumulated technological resources. The model explains better how Korean firms are achieving a rapid catch-up of technological gaps with advanced nations and are able to transfer from the technology follower to the leader position.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.