• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.165-170
• /
• 2016

곡면형 플라즈마 도파로에 기초한 나노 크기의 전력분배기가 다중모드 간섭 결합기의 특성을 이용하여 설계되었다. 플라즈마 곡면형 다중모드 간섭 결합기(PC-MMIC)의 적응 특성을 쉽게 분석하기 위하여 등각변환 해석법을 이용하여 곡면형 구조를 평면형 구조로 등가 변환하였다. 또한, 3D 전송구조의 전파특성과 최적의 설계변수를 선택하기 위하여 유효 유전체 방법과 종방향 모드 전송 선로 해석법을 적용하였다. 설계된 $2{\times}2$ PC-MMIC는 휘어진 구조에 기인하여 quasi-TM 모드에서는 PC-MMIC의 특성이 나타내지 않았으며, quasi-TE 모드의 경우 50%:50%의 비율로 출력되는 3dB 결합특성이 나타나지 않았다. 더욱이, 곡률 반경이 작은 부분 보다 큰 부분에서 입사된 신호가 더욱 좋은 결합특성을 나타내었다.

• 한국결정성장학회지
• /
• 제13권3호
• /
• pp.132-138
• /
• 2003

수평 전기로에서 $CdIn_2Te_4$ 다결정을 용응법으로 합성하고 Bridgman법으로 tetragonal structure의 $CdIn_2Te_4$ 단견정을 성장시켰다. c축에 수직한 시료의 광흡수와 광전류 spectra를 293k에서 10K까지 측정하였다. Hall효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 $8.61\times 10^{16}\textrm{cm}^3,\;242\textrm{cm}^$V .s였다. $CdIn_2Te_4$ 단결정의 광흡수와 광전류 spectra를 293k에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap $E_g$(T)는 Varshni 공식에 따라 계산한 결과 $1.4750ev - (7.69\times10^{-3})\; ev/k)\;T^2$/(T + 2147k)이었다. 광전류 스펙트럼으로부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting Δcr값이 0.2704 eV이며 spin-orbit $\Delta$so값은 0.1465 eV임을 확인하였다. 10K일 때 광전류 봉우리들은 n : 1일때 $A_\;{1-} B_\;{1-}$와 $C_\;{1-}$-exciton봉우리임을 알았다

• 한국결정성장학회지
• /
• 제17권5호
• /
• pp.179-186
• /
• 2007

[ $CdGa_2Se_4$ ] 단결정 박막을 수평 전기로에서 합성한 $CdGa_2Se_4$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 $630^{\circ}C,\;420^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선(DCRC)으로 부터 구하였다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 293K에서 운반자 농도와 이동도는 각각 $8.27{\times}10^{17}cm^{-3},\;345cm^2/V{\cdot}s$였다. $CdGa_2Se_4/SI$(Semi-Insulated) GaAs(100) 단결정 박막의 광흡수와 광전류 spectra를 293K에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap $E_g(T)$는 Varshni 공식에 따라 계산한 결과 $E_g(T)=2.6400eV-(7.721{\times}10^{-4}eV/K)T^2/(T+399K)$였다. 광전류 스펙트럼으로부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting 에너지 ${\Delta}cr$값이 106.5meV이며 spinorbit 에너지 ${\Delta}so$값은 418.9meV임을 확인하였다. 10K일 때 광전류 세 봉우리들은 $A_{1^-},\;B_{1^-}$와 $C_{11}-exciton$ 봉우리임을 알았다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.393-402
• /
• 2018

While interacting with a sloping structure, an ice floe may fracture in different patterns. For example, it can be local bending failure or global splitting failure depending on the contact properties, geometry and confinement of the ice floe. Modelling these different fracture patterns as a natural outcome of numerical simulations is rather challenging. This is mainly because the effects of crack propagation, crack branching, multi fracturing modes and eventual fragmentation within a solid material are still questions to be answered by the on-going research in the Computational Mechanic community. In order to simulate the fracturing of ice floes with arbitrary geometries and confinement; and also to simulate the fracturing events at such a large scale yet with sufficient efficiency, we propose a semi-analytical/empirical and semi-numerical approach; but with focus on the global splitting failure mode in this paper. The simulation method is validated against data we collected during the Oden Arctic Technology Research Cruise 2015 (OATRC2015). The data include: 1) camera images based on which we specify the exact geometry of ice floes before and after an impact and fracturing event; 2) IMU data based on which the global dynamic force encountered by the icebreaker is extracted for the impact event. It was found that this method presents reasonably accurate results and realistic fracturing patterns upon given ice floes.

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.103-110
• /
• 2020

In this study, the behavior of water droplet impacting on a thin horizontal wire was visualized by time-delay photography. The impact behavior modes, critical capture speed and trapped mass were analyzed by changing the droplet size, velocity, wire diameter and eccentricity ratio. As the Weber number increased, the hanging, merging, and splitting modes appeared sequentially for the case of central impact, and the hanging and non-splitting modes appeared for the case of off-center impact. The boundary We number of each mode was affected by the diameter ratio. The critical capture speed was affected much by the degree of eccentricity. For all diameter ratios, it was higher for the case of central impact than for off-center impact. The trapped mass was larger for the case of central impact than for off-center impact and it increased with the smaller We number and the larger diameter ratio.

• 한국인터넷방송통신학회논문지
• /
• 제11권3호
• /
• pp.47-52
• /
• 2011

세 채널로 구성된 나노 크기의 플라즈마 방향성 결합기가 모드 결합효과와 립형 전송구조를 사용하여 설계되었다. 종방향 모드 전송선로 해석법을 이용하여 방향성 결합기에서 전파하는 빛의 전파특성과 설계특성들을 분석하였다. 전력분배기로 동작하는 플라즈마 방향성 결합기는 약 200~250 nm의 전송 폭을 갖는 나노 크기로 설계하였다. 최적의 전력분배율을 얻기 위하여 중심 채널의 폭 변화에 따른 전송 모드들의 굴절률을 분석하였다. 결국, 하향 채널에서 입사된 광 신호를 각 채널을 통하여 출력하는 나노 크기의 플라즈마 방향성 결합기가 설계되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2686-2708
• /
• 2020

This paper investigates the energy efficiency of energy harvesting (EH) bidirectional cooperative sensor networks, in which the considered system model enables the uplink information transmission from the sensor (SN) to access point (AP) and the energy supply for the amplify-and-forward (AF) relay and SN using power-splitting (PS) or time-switching (TS) protocol. Considering the minimum EH activation constraint and quality of service (QoS) requirement, energy efficiency is maximized by jointly optimizing the resource division ratio and transmission power. To cope with the non-convexity of the optimizations, we propose the low complexity iterative algorithm based on fractional programming and alternative search method (FAS). The key idea of the proposed algorithm first transforms the objective function into the parameterized polynomial subtractive form. Then we decompose the optimization into two convex sub-problems, which can be solved by conventional convex programming. Simulation results validate that the proposed schemes have better output performance and the iterative algorithm has a fast convergence rate.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.652-660
• /
• 2015

To study the bearing characteristics of glass fiber reinforced glulam for structural design, bearing strength tests were performed. Bearing loads were applied in the direction parallel to the grains, and the holes were prepared in such a way that the bolts would bear and support all the layers. The yield bearing strengths of the glass fiber reinforced glulam were found to be similar to those of the non-reinforced glulam, and were almost constant regardless of increases in bolt diameter. The ratio of the experimental yield bearing strength to the estimated bearing strength according to the suggested equation of the Korea Building Code and National Design Specification was 0.91~1.03. For the non-reinforced glulam and the sheet glass fiber reinforced plastic glulam, the maximum bearing load was measured according to the splitting fracture of specimens under bolt. The textile glass fiber reinforced glulam underwent only an embedding failure caused by the bearing load. The failure mode of reinforced glulam according to bearing load will influence the failure behavior of bolted connection, and estimating the shear yield strength of the bolted connection of the reinforced glulam is necessary, not only by using the bearing strength characteristics but also using the fracture toughness of the reinforced glulam.

• Smart Structures and Systems
• /
• 제29권4호
• /
• pp.535-547
• /
• 2022

Failure patterns of rock specimens represent valuable information about the mechanical properties and crack evolution mechanism of rock. Several kinds of research have been conducted regarding the failure mechanism of brittle material, however; the influence of brittleness on the failure mechanism of rock specimens has not been precisely considered. In the present study, experimental and numerical examinations have been made to evaluate the physical and mechanical phenomena associated with rock failure mechanisms through the uniaxial compression test. In the experimental part, Unconfined Compressive Strength (UCS) tests equipped with Acoustic Emission (AE) have been conducted on rock samples with three different brittleness. Then, the numerical models have been calibrated based on experimental test results for further investigation and comparing the micro-cracking process in experimental and numerical models. It can be perceived that the failure mode of specimens with high brittleness is tensile axial splitting, based on the experimental evidence of rock specimens with different brittleness. Also, the crack growth mechanism of the rock specimens with various brittleness using discrete element modeling in the numerical part suggested that the specimens with more brittleness contain more tensile fracture during the loading sequences.

• 전자공학회논문지D
• /
• 제35D권11호
• /
• pp.85-90
• /
• 1998

다중모드간섭 현상에 입각한 1 4 폴리머 광파워분할기를 설계, 제작하였다. 이 광파워분할기는 2차원 유한차분 빔전파방법을 사용하여 설계하였다. 코어와 클래딩 물질로 각각 Cyclotene-3022과 UV-15이 사용되었고, 반응이온식각 공정에 의해 제작되었다. 제작된 1 4 광파워분할기의 각 출구에서의 측정된 광출력비는 TE모드에서 0.93 : 1.00 : 0.93 : 0.90, TM모드에서 0.84 : 0.94 : 1.00 : 0.83 이었다. 다중모드간섭 현상을 이용한 1 4 광파워분할기는 소자의 길이가 작고, 편광에 따른 의존도가 작은 장점이 있다.