• 드라이브 ㆍ 컨트롤
• /
• 제18권2호
• /
• pp.46-55
• /
• 2021

A forklift is a powered industrial vehicle used to lift and move materials over short distances. Nowadays, almost all forklifts are equipped with an automatic transmission due to its improved operator comfort and increased productivity. Thanks to marked improvement of transmission control unit equipped with highly-advanced microcontrollers, recently developed automatic transmission for forklift have various auxiliary functions such as creep, auto retardation, and automatic shift with excellent shift quality. This paper deals with the creep function which enables one to maneuver a forklift at the designated low speed by slip control of clutches. The design of creep function was based on four modes of creep operation depending on the status of the operator's shift lever and accelerator pedal. Control algorithms and control parameters for each mode were designed to achieve the desired static and dynamic performance. Vehicle test for the designed creep function was carried out with an independently developed embedded controller. Test results confirmed good creep speed control without speed error at a steady state with a mild shift shock during mode changes by stepping or releasing the accelerator.

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.39-46
• /
• 1994

CMOS LCD driving circuits using poly-Si TFT have been designed and basic blocks including test patterns have been fabricated. Column driver drives the pixels by block because polu-Si TFT can not operate at the speed of video signal. Row driver has mode selection circuit which can select a mode between interlacing mode and non-interlacing mode. Experimental results show shift register can operate at 1MHz colck frequency with 4pF load.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1092-1095
• /
• 2003

A driving mechanism and excellent features for an in-plane switching twisted nematic liquid crystal mode (IT mode) that could possibly improve the viewing-angle and color shift characteristics and the cell gap error tolerance is proposed. .It is important that the surface azimuthal anchoring strength of the liquid crystal cell differs at the upper and lower substrates. Furthermore. as a rubbing-free LCD. amorphously aligned in-plane switching twisted nematic mode (a-IT mode) is also demonstrated.

• 오토저널
• /
• 제9권1호
• /
• pp.57-68
• /
• 1987

The driving pattern was studied in Seoul along nineteen representative routes using a test car equipped with all the instruments required for recording traffic flow and measuring fuel consumption. Speed histories, gear shift points, instantaneous fuel consumption rates, etc. were recorded and the data were anlyzed to determine the traffic characteristics for Seoul. The Seoul-14 Mode has been developed to simulated actual driving conditions in Seoul with respect to fuel consumption. The average speed of the Seoul-14 Mode is 30.1 Km/h and the Mode length is 11.94 Km.

• 한국광학회지
• /
• 제14권2호
• /
• pp.184-188
• /
• 2003

TM 모드에는 영향을 끼치지 않으면서 TE 모드의 위상만을 변조시키는 P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$ 도파로 위상변조기를 제작하였다. TE 모드에 대해서만 위상변조를 일으키게 하기 위해 P-I-i-I-N 구조를 선택하였다. Fabry-Perot 공명 방법을 이용해서 TE-와 TM 모드에 대해 $\lambda=1.55$\mu\textrm{m}$ 파종에서 각각 측정하였다. TE-편광된 빛에 대한 위상변조 효율은 $\Delta\phi=7.9^{\circ}/V.mm$ 였다. 이것은 비슷한 구조를 갖는 위상변조기의 변조 효율 보다 거의 2.5배정도 향상된 결과이다. 또한, TM-편광된 빛에 대해 서는 위상변조가 관측되지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.156-157
• /
• 1998

It is a diffcult and challenging pproblem to control the growth of eppitaxial films. Heteroeppitaxy is esppecially idfficult because of the lattice mismatch between sub-strate and depposited layers. This mismatch leads usually to a three dimensional(3D) island growth. But the use of surfactants such as As, Sb, and Bi can be beneficial in obtaining high quality heteroeppitaxial films. In this study medium energy ion scattering sppectroscoppy(MEIS) was used in order to reveal the growth mode of Ge on Si(001) and the strain of depposited film without and with dynamically supplied atomic hydrogen at the growth thempperature of 35$0^{\circ}C$. It was ppossible to control the growth mode from layer-by-layer followed by 3D island to layer-by-layer by controlling the hydrogen flux. In the absent of hydro-gen the film grows in the layer-by-layer mode within the critical thickness(about 3ML) and the 3D island formation is followed(Fig1). The 3D island formation is suppressed by introducing hydrogen resulting in layer-by-layer growth beyond the critical thickness(Fig2) We measured angular shift of blocking dipp in order to obtain the structural information on the thin films. In the ppressence of atomic hydrogen the blocking 야 is shifted toward higher scattering angle about 1。. That means the film is distorted tetragonally and strained therefore(Fig4) In other case the shift of blocking dipp at 3ML is almost same as pprevious case. But above the critical thickness the pposition of blocking dipp is similar to that of Si bulk(Fig3). It means the films is relaxed from the first layer. There is 4.2% lattice mismatch between Ge and Si. That mismatch results in about 2。 shift of blocking dipp. We measured about 1。 shift. This fact could be due to the intermixing of Ge and Si. This expperimental results are consistent with Vegard's law which says that the lattice constant of alloys is linear combination of the lattic constants of the ppure materials.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.456-466
• /
• 2010

전형적인 하이브리드 모터의 연소 불안정 현상인 DC-Shift는 비선형적 특성을 갖는다. DC-Shift는 두 가지 형태로 나타나게 되는데, 압력이 급격하게 상승하는 양의 DC-shift와 연소 도중에 압력이 갑자기 감소하는 음의 DC-shift로 구분된다. 이 논문에서는 산화제 공급 유동 조건을 다양하게 변화시켜 음의 DC-shift 현상을 유도하고 산화제 공급 유동조건과 하이브리드 로켓이 갖고 있는 기본적인 주파수와 Helmholtz 주파수, 음향모드와의 공진을 유도하여 음의 DC-shift 현상의 발생 조건과 특징에 대하여 알아보았다. 실험 결과 연소 중 수백 Hz 대역의 압력 주파수 이동을 확인하였으며, 음의 DC-Shift가 연소로 발생하는 주파수와 유동의 흐름으로 인한 주파수간 위상이 상호 감쇠되어 발생한 것으로 나타났다. 향후 연소 중 나타나는 주파수의 변화에 따른 DC-Shift 현상에 대해서는 계속 연구되어야 한다.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.205-215
• /
• 1996

We derive the analytic equations for the transmission gain spectrum of a phase shift controlled (PSC) DFB filters with complexed coupled gratings considering both facet reflections and the phase of gratings using the transfer matrix method. The number of parameters of the equations is reduced by using the parameter of effective phase shift defined by the sum of the phase shift in a PSC region the effect of both facets reflections and the effective phase shift on the transmission gain spectrum and verify the validity of those equations from the computer simulation results. Computer simulation results show the PSC DFB filter with a pure index coupled grating has the widest tunable range and that with a pure gain grating has the largest side mode suppression ratio.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.20-29
• /
• 2011

This paper presents an improved phase-shift pulse-width modulation (PWM) full-bridge converter using a blocking capacitor. As the proposed converter reduces the circulation energy by inserting only one series blocking capacitor at the primary side of the conventional phase-shift PWM full-bridge converter structure, it improves the operation characteristics of the conventional converter. In this paper, first, the operation of conventional phase-shift PWM full-bridge converter is roughly reviewed, and then the operational principle of the proposed converter is classified and explained by each mode. After that, a prototype design example based on the operational principle is shown. Then, the improved operation characteristics of the proposed converter are actually verified through the experimental results.

• 한국철도학회논문집
• /
• 제14권2호
• /
• pp.181-187
• /
• 2011

국내 철도화물의 경쟁력 제고를 위해 정부는 2010년 7월부터 모달쉬프트 보조금제도를 도입하고 도로 운송에서 철도로 전환시 발생하는 추가비용을 지원하고 있으나, 아직 제도시행 초기단계로서 제도의 보완 및 개선 필요성이 제기되고 있다. 본 연구는 유럽연합, 영국, 일본 등 오랜 기간 모달쉬프트 보조금제도를 운용해온 사례의 검토를 통하여 시사점을 도출하였다. 또한 국내 철도 전환보조금 지원방향을 보조금효과 극대화 측면, 기존철도물량의 지속적 확보 측면, 지원의 정당성확보 측면에서 제시하고, 현 보조금제도의 발전방향을 제시하였다.