• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.802-805
• /
• 1988

The objective of the present study was to manufacture the piezoelectric composites of Lead Zirconate Titanate (PZT) - polymer for applications such as ultrasonic medical diagnosis and hydrophone. The PZT rod-polymer composites have been prepared with 4.5 to 57 volume percent PZT using 1.5 mm rod, so the connectivity pattern of the two phase is 1-3 type. The electromechanical coupling factors of radial mode ($k_{p}$) and thickness mode ($k_{t}$) were nearly independent of the volume percent PZT, which were 0.3 and 0.65, respectively. The acoustic impedance of the piezoelectric composites was measured by the resonance technique in the frequency range 50 KHz-1.5 MHz, which was in the range of 3.8 - 60 Mrayl.

• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.7-14
• /
• 1988

In this paper, piezoelectric composite materials of 1-3 connectivity were prepared by using "dicing-filling" technique with PZT ceramics and epoxy polymers, and the dependence of piezoelectric properties on the thickness of specimens was investigated. In case that the PZT volume percent is 18.1%, according to an increment of thickness, the dielectric constant of composites( 33) is unchangeable, which is about 200, the piezoelectric coefficient (d33) is somewhat increased, which is about 240-280 (PC/N) and the electromechanical coupling factor of thickness mode(kt) is proportioned, but radial mode(kp) is constant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.19-24
• /
• 2001

In this study, Pb(La Ce)$TiO_3$ composition ceramics were manufactured for 20 MHz resonator application. Electromechanical coupling factor, mechanical quality factor and dynamic range of thickness vibration mode were measured as the variations of L/T(length/thickness) ratio of ceramic substrats. Mechanical quality factor and dynamic range of third overtone thickness vibration mode showed the highest value of 2,773 and 52.22 dB at specimen S4(l/t=12), respectively. The excellent temperature stability of resonant frequency suitable for resonator application was shown, regardless of thermal shock.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.720-725
• /
• 2001

In this study, Pb(La,Ce)Ti $O_3$ ceramics were manufactured for 20 MHz resonator application. Electromechanical coupling factor( $k_{t}$, $k_{t3}$, mechanical quality factor( $Q_{mt}$ , $Q_{mt3}$ and dydnamic range (D.R) of thickness vibration mode were measured as the variations of $\ell$/t(length/thickness) ratio of ceramic substrates. Mechanical quality factor( $Q_{mt3}$) and dynamic range of third overtone thickness vibration mode showed the highest value of 2,773 and 52.22dB at specimen S4($\ell$/t=12), respectively. The excellent temperature stability of resonant frequency suitable for resonator application was shown, regardless of thermal shock.k.ock.k.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.153-159
• /
• 2008

Graded-Index Multimode Optical fibers have recently received a lot of attention as regards their application and lightwave behavior in relation to broadband communication links. Accordingly, this aticle presents a novel lightwave mode analysis that solves the wave equation using a numerical analysis based on an eigenvalue problem method, thereby avoiding the typical complicated Bessel function method. Angular depedences and number of modes were observed as well. Future research implications will be possibly noticed such areas as bending effects and mode coupling analyses thru this research.

• Journal of the Optical Society of Korea
• /
• v.8 no.1
• /
• pp.17-20
• /
• 2004

An in-line variable attenuator has been proposed and demonstrated exploiting a side-polished single-mode (SM) fiber evanescently coupled with an index matched dielectric plate. The attenuation can be controlled by fine mechanical sliding of the index matched dielectric plate. We have achieved 49 ㏈ dynamic range and very low excess loss of 0.2 ㏈ at 1550 nm wavelength. The measured polarization dependent losses (PDL) were 0.1, 0.2, and 0.4 ㏈ at 10, 20, and 30 ㏈ attenuation, respectively. Wavelength sensitivity was measured to be -0.017/nm ㏈ at 20 ㏈ attenuation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.136-142
• /
• 2001

In this paper, a method of canceling and suppressing differential mode crosstalk noise signals caused by non-uniform coupling between two transmission lines in UTP (unshielded twisted pair) modular jacks is discussed. Differential mode crosstalk noise signals in balanced transmission lines with UTP modular jacks were suppressed, by applying field cancellation techniques to this modular jack. To verify an effectiveness of the field cancellation techniques, 8 pin modular jacks were made, and the NEXT (Near End Crosstalk) losses were measured to prove its applicability by the network analyzer(HP8720C) at 100 Mb/s.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.932-937
• /
• 2000

The length extensional vibration mode of a piezoelectric ceramic substrate is used in fabricating the ultra-small size resonators and filters. In general, the three side ratios of the rectangular substrate affect the resonant characteristics of the resonator using its length extensional vibration. In this paper, their relationships are studied. We know that changing the ratio of its length to its width makes possible to change the resonant frequency of the width vibration without degrading the length extensional vibration. And frequency constant for length extensional vibration becomes slightly small as the substrate thickness becomes thin, but it does not change as its length changes. Electro-mechanical coupling factor for length extensional vibration, k$\_$31/ does not change as its length changes within length/width$\geq$4, but it becomes small as its width increases.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.852-855
• /
• 2005

Structural Dynamic Modification(SDM) is a technique to improve structure's dynamic characteristics by adding and removing substructures or changing material properties and shape of structures. This paper describes SDM techniques applied to a large structure with too many DOFs. The goal of this SDM technique is to modify a targe structure efficiently for its natural frequencies to avoid excitation frequencies. In this case, models reduced by Component Mode Synthesis(CMS) method that is a coupling technique are used to analyze a large structure efficiently. This paper considers a helicopter deck model with 55,000 DOFs as an application.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.406-413
• /
• 2001

We report theoretical and experimental results for the wavelength and polarization selectivity of a fiber-to-planar waveguide coupler made of a side polished single mode fiber covered with a planer waveguide incorporating a thin metal film. A simple but exact approach to obtain the modal properties of multilayer planar waveguide with a thin metal film is described. The device was modeled into equivalent 1 dimensional structure and its behaviour was analyzed based on coupled mode theory. The effects of metal film thickness and refractive index of superstrate on the device properties were measured and explained.