• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.543-556
• /
• 2009

Recently, NAND flash memory is being used as the swap device of virtual memory as well as the file storage of mobile systems. Since temporal locality is dominant in page references of virtual memory, LRU and its approximated CLOCK algorithms are widely used. However, cost of a write operation in flash memory is much larger than that of a read operation, and thus a page replacement algorithm should consider this factor. This paper analyzes virtual memory read/write reference patterns individually, and observes the ranking inversion problem of temporal locality in write references which is not observed in read references. With this observation, we present a new page replacement algorithm considering write frequency as well as temporal locality in estimating write reference behaviors. This new algorithm dynamically allocates memory space to read/write operations based on their reference patterns and I/O costs. Though the algorithm has no external parameter to tune, it supports optimized implementations for virtual memory systems, and also performs 20-66% better than CLOCK, CAR, and CFLRU algorithms.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.114-125
• /
• 2006

Since wireless Internet services and small mobile communication devices come into wide use as well as the use of GPS is rapidly growing, researches on moving object, whose location information shifts sequently in accordance with time interval, are being carried out actively. Especially, the researches on vehicle moving object are applied to Advanced traveler information system, vehicle tracking system, and distribution transport system. These systems are very useful in searching previous positions, predicted future positions, the optimum course, and the shortest course of a vehicle by managing historical data of the vehicle movement. In addition, vehicle historical data are used for distribution transport plan and vehicle allocation. Vehicle historical data are stored at regular intervals, which can have a pattern. For example, a vehicle going repeatedly around a specific section follows a route very similar to another. If historical data of the vehicle with a repeated route course are stored at regular intervals, many redundant data occur, which result in much waste of storage. Therefore this thesis suggest a vehicle historical data store scheme for vehicles with a repeated route course using similar trajectory which efficiently store vehicle historical data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.523-528
• /
• 2012

A bendable electronic module is developed for a mobile application by using a low-cost roll-to-roll manufacturing process. In the module, a thin silicon chip is embedded in a polymer-based encapsulating adhesive between flexible copper clad polyimide layers. A set of tests are conducted for the purpose of qualification: thermal shock, high temperature storage, and autoclave tests. During the autoclave test, delamination occurs at many places within the module layers. To investigate the failure mechanism, moisture diffusion analysis is conducted for the interior of the module under the autoclave test condition. For the analysis, the hygroscopic characteristics of the encapsulating materials are experimentally determined. Analysis results indicate the moisture saturation process in the interior of the module under the autoclave test condition.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.145-151
• /
• 2006

In conjunction with the rapid progress of IT(information technology) an increasing amount of data are being generated. The amount of new data is so big and the type of new data generated from clients or sensor devices needed to be in ubiquitous environment is so various that it is hard to manage and control them. Especially data to be occurred in ubiquitous environment are generated through PDA(personal digital assistant) smart phone, mobile device or sensor units etc. Therefore, to manage and control them generated from ubiquitous devices for decision making, we can use data warehouse as an integrated storage. A data warehouse integrates and aggregates data of several different DBMS into one DBMS. Also the updated data from source data have to be effectively propagated to the data warehouse. Therefore, in this paper, we proposed a mode) for an exact and efficient data management methodology in new IT paradigm environment, ubiquitous computing environment, to apply updated data on the warehouse to make decision. We also show brief result compared to conventional methodology.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.67-81
• /
• 2012

Due to the recent advancement of cloud computing, the research on database outsourcing has been actively done. Moreover, the number of users who utilize Location-based Services(LBS) has been increasing with the development in w ireless communication technology and mobile devices. Therefore, LBS providers attempt to outsource their spatial database to service provider, in order to reduce costs for data storage and management. However, because unauthorized access to sensitive data is possible in spatial database outsourcing, it is necessary to study on the preservation of a user's privacy. Thus, we, in this paper, propose a spatial data encryption scheme to produce outsourced database from an original database. We also propose a k-Nearest Neighbor(k-NN) query processing algorithm that efficiently performs k-NN by using the outsourced database. Finally, we show from performance analysis that our algorithm outperforms the existing one.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.111-118
• /
• 2005

The purpose of this study is to address the progress of the heat island phenomenon and the scheme to decrease in heat island phenomenon through analysis of micro-climates according to land use and make a plan to construct wind ways. The result is: 1) Analysis of temperature and humidity at 6 spots for 24 hours showed that heat island phenomenon was considerably intense around center road of Gwangju and can be mild through making lakes and green zones. 2) Analysis of the direction and velocity of the wind at 2 spots for 24 hours showed that the direction of the wind at the center of Gwangju was SSW(South-South-West) and average velocity of the it was $1.2{\sim}1.5\;m/s$. To make the inflow of the low-temperature air current from Mt. Mudeung into the city through Gwangju river, efficient management of Gwangju riverside parks should be considered for Gwangju river itself to be wind way. 3) Analysis of mobile temperature measurement on 3 courses for 24 hours showed that the low-temperature air current of Mt. Mudeung and a micro-climate of Gwangju river can lighten thermal storage phenomena of the city in that the temperature was lowest at Gwangju riverside. These outcome is from a day term measurement. So, to figure out accurate condition of heat island phenomenon in Gwangju City, it is needed to have long term measurements and accumulation of those information.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.23-30
• /
• 2010

Flash memory is non-volatile and can retain data even after system is powered off. Besides, it has many other features such as fast access speed, low power consumption, attractive shock resistance, small size, and light-weight. As its price decreases and capacity increases, the flash memory is expected to be widely used in consumer electronics, embedded systems, and mobile devices. Flash storage systems generally adopt a software layer, called FTL. In this research, we proposed a new FTL mechanism for overcoming the major drawback of conventional block mapping algorithm. In addition to the block mapping table, a index block mapping table with a small size is used to indicate sector location. The proposed indexed block mapping algorithm by adding a small size. By the simulation result, the proposed FTL provides an enhanced speed than a conventional hybrid mapping algorithm by around 45% in average, and the requirement of mapping memory is also reduced by around 12%.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.35-40
• /
• 2010

NAND flash memory has been widely used than traditional HDD in PDA and other mobile devices, embedded systems, PC because of faster access speed, low power consumption, vibration resistance and other benefits. DiskSim and other HDD simulators has been developed that for find improvements for the software or hardware. But there is a few Linux-based simulators for NAND flash memory and SSD. There is necessary for Windows-based NAND flash simulator because storage devices and PC using Windows. This paper describe for development of simulator-NFSim for FTL performance analysis in NAND flash. NFSim is used to measure performance of various FTL algorithms and FTL wear-level. NAND flash memory model and FTL algorithm developed using Windows Driver Model and class for scalability. There is no need for another tools because NFSim using graph tool for data measure of FTL performance.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2020

The use of NAND flash memory is continuously increased with the demand of mobile data in the IT industry environment. However, the erase operations in flash memory require longer latency and higher power consumption, resulting in the limited lifetime for each cell. Therefore, frequent write/erase operations reduce the performance and the lifetime of the flash memory. In order to solve this problem, management techniques for improving the performance of flash based storage by reducing write and erase operations of flash memory with using disk buffers have been studied. In this paper, we propose a CPWL to minimized the number of write operations. It is a disk buffer management that separates read and write pages according to the characteristics of the buffer memory access patterns. This technique increases the lifespan of the flash memory and decreases an energy consumption by reducing the number of writes by arranging pages according to the characteristics of buffer memory access mode of requested pages.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2425-2430
• /
• 2013

A simple, fast and robust analytical method was developed to determine imatinib in human plasma using liquid chromatography-tandem mass spectrometry with electrospray ionization in the positive ion mode. Imatinib and labeled internal standard were extracted from plasma with a simple protein precipitation. The chromatographic separation was performed using an isocratic elution of mobile phase involving 5.0 mM ammonium formate in water-5.0 mM ammonium formate in methanol (30:70, v/v) over 3.0 min on reversed-stationary phase. The detection was performed using a triple-quadrupole tandem mass spectrometer in multiple-reaction monitoring mode. The developed method was validated with lower limit of quantification of 10 ng/mL. The calibration curve was linear over 10-2000 ng/mL ($R^2$ > 0.99). The method validation parameters met the acceptance criteria. The spiked samples and standard solutions were stable under conditions for storage and handling. The reliable method was successfully applied to real sample analyses and thus a pharmacokinetic study in 27 healthy Korean male volunteers.