• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.44-51
• /
• 2012

It is more important to realize safety management, medium-large accident prevention and risk prediction as accident of industry facilities can generate enormous physical and human damage because most energy plant might handle toxic substance. Especially, atmospheric dispersion system, which is able to simulate situation, have been used for release accident of toxic substance since the accident can show different of dispersion range and velocity according to release material, storage facility and atmospheric status. However those systems have been used generally in design step of industry facility and are difficult to deal with release accident quickly. Although some researches and cases have been studied for using real-time atmospheric information, there are insufficient system for processing quickly release accident. This paper aims to develop real-time smart atmospheric dispersion system that can deal with release accident quickly by enhancing distinct characteristics and efficiency of energy plant, and select release time and area using intelligent algorithm as accident prevention type.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.431-436
• /
• 2005

A high-performance liquid chromatographic method was validated for quantitation of nadolol in human plasma. Nadolol and internal standard, pindolol, were extracted with tert-butyl methyl ether after addition of 10 M sodium hydroxide solution. The analytes were separated on a reverse phased C18 column using a mobile phase consisting of 0.05 M ammonium phosphate monobasic buffer, acetonitrile and methanol (81: 17:2 v/v/v) and detected using a fluorescence detector (excitation wavelength 230 nm, emission wavelength 294 nm). The method was specific and sensitive enough to detect as low as 3 ng/mL of nadolol in human plasma. Linear calibration range was 3-150 ng/mL with correlation coefficient greater than 0.999. The overall accuracy was in the range of 96.8 to 103% and precision C.V.(%) 7.30 to 12.2%. The recovery was approximately 100% and stability was confirmed during storage and sample preparation. The present HPLC method was successfully applied to study bioavailability after oral administration of 80 mg of nadolol in healthy Korean subjects. The mean $AUC_{t}$ was $1968{\pm}397\;ng{\cdot}hr/mL$ and $C_{max}$ of $186{\pm}79.3\;ng/mL$ was reached at $3.5{\pm}0.76\;hr$. The mean $t_{1/2}$ of nadolol was $17.3{\pm}2.59\;hr$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3261-3266
• /
• 2012

Sodium borohydride($NaBH_4$) known as the material of hydrogen generation and storage can produce the hydrogen via catalytic hydrolysis. This protide chemical could be used in the hydrogen supply system for residential and mobile fuel cells, and thus many researches and developments regarding to these chemicals and decomposition reactions have been implemented. We experimented the hydrolysis of $NaBH_4$ alkaline solution by metal oxide-supported PGM(platinum group metal) catalysts and measured the generation rate of hydrogen which is product of decomposition reaction. We compared oxides as catalyst supports, and the precious metals, Pt and Ru for the catalysts and studied the effects of amounts of catalyst added and $NaBH_4$ concentrations on the hydrogen generation rates and patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.396-404
• /
• 2011

Recently, the wide spread popularity of smart phones causes the advent of various mobile applications base on the location information. Since previous pedestrian navigations are applied by extending car navigations, these are not only difficult to provide the appropriate route information, but also raise limitations in the efficient query processing by data structures of car road networks. In addition, these increase the power consumption caused by the growth of I/O frequency. In this paper, we propose a pedestrian road network model for the accurate route information and a storage structure for the pedestrian road network based on POI to reduce the I/O frequency. The proposed method enables efficient route searches over POI reflecting the characteristics and requirements of pedestrian roads. Also, a reduction of query processing costs for the route searching by a data structure considered with POI can save the power consumption more than previous approaches.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.115-123
• /
• 2012

As the market of lithium secondary batteries moves from mobile IT devices to large-format electric vehicles or energy storage systems, the strengthened battery specifications such as long-term reliability longer than 10 years, pack-level safety and tough competitive price have been required. Moreover, even though high power properties should also be achieved for hybrid electric vehicles, it is not easy to measure accurate power values at various conditions. Because it is difficult to choose a proper measurement method and its experimental condition is more complex comparing to capacity measurement. In addition, the power values are very sensitive to power duration time, state-of-charge (SOC) of cells, cut-off voltages, and temperatures, whereas capacity values are not. In this paper, we introduce three kinds of power measurement methods, hybrid pulse power characterization (HPPC) suggested by US FreedomCar, so-called J-pulse by Japan electric vehicle association standards (JEVS) and constant power measurement, respectively. Moreover, with pouch-type unit cells for HEV, experimental power data are discussed in order to compare each power measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1359-1370
• /
• 2009

In wireless sensor networks, data dissemination is based on data-centric routing that well matches the publish/subscribe communication paradigm. The publish/subscribe paradigm requires decoupling properties: space, time, and synchronization decoupling. For large-scale applications, the three decoupling properties provide scalability and robust communication. However, existing data dissemination schemes for wireless sensor networks do not achieve full decoupling. Therefore, we propose a novel data dissemination scheme that fully accomplishes the three decoupling, called ARBIETER. ARBITER constructs an independent network structure as a logical software bus. Information interworking between publishers and subscribers is indirectly and asynchronously performed via the network structure. ARBITER also manages storage and mapping of queries and data on the structure because of supporting different time connection of publishers and subscribers. Our simulation proves ARBITER show better performance in terms of scalability, network robustness, data responsibility, mobility support, and energy efficiency.

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.13-18
• /
• 2020

Lithium-ion batteries have a small volume, light weight and high energy density, maximizing the utilization of mobile devices. It is widely used for various purposes such as electric bicycles and scooters (e-Mobility), mass energy storage (ESS), and electric and hybrid vehicles. To date, lithium-ion batteries have grown to focus on increasing energy density and reducing production costs in line with the required capacity. However, the research and development level of lithium-ion batteries seems to have reached the limit in terms of energy density. In addition, the charging time is an important factor for using lithium-ion batteries. Therefore, it was urgent to develop a high-speed charger to shorten the charging time. In this thesis, a discharger was fabricated to evaluate the capacity and characteristics of Li-ion battery pack which can be used for e-mobility. To achieve this, a smart discharger is designed with a combination of active load, current sensor, and temperature sensor. To carry out this thesis, an active load switching using sensor control circuit, signal processing circuit, and FET was designed and manufactured as hardware with the characteristics of active discharger. And as software for controlling the hardware of the active discharger, a Raspberry Pi control device and a touch screen program were designed. The developed discharger is designed to change the 600W capacity battery in the form of active load.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.32-41
• /
• 2008

In this paper, we describe the synthesis of robust and non-fragile $H^{\infty}$ state feedback controllers for linear systems with affine parameter uncertain tracking servo system of blu-ray disc drive, as well as static state feedback controller with polytopic uncertainty Similarity any other control system, the objective of the track-following system design for optical disc drives is to construct the system with better performance and robustness against modeling uncertainties and various disturbances. Also, the obtained condition can be rewritten as parameterized linear matrix inequalities(PLMIs), that is, LMIs whose coefficients are functions of a parameter confined to a compact set. We show that the resulting controller guarantees the asymptotic stability and disturbance attenuation of the closed loop system in spite of controller gain variations within a resulted polytopic region.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.831-847
• /
• 2013

The various types of data are being created in large quantities resulting from the spread of social media and the mobile popularization. Many companies want to obtain valuable business information through the analysis of these large data. As a result, it is a trend to integrate the big data technologies into the company work. Especially, Hadoop is regarded as the most representative big data technology due to its terabytes of storage capacity, inexpensive construction cost, and fast data processing speed. However, the authentication token system of Hadoop Distributed File System(HDFS) for the user authentication is currently vulnerable to the replay attack and the datanode hacking attack. This can cause that the company secrets or the personal information of customers on HDFS are exposed. In this paper, we analyze the possible security threats to HDFS when tokens or datanodes are exposed to the attackers. Finally, we propose the secure authentication protocol in HDFS based on hash chain.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.21-27
• /
• 2013

In recently years, with the growth of social media and the development of mobile devices, the data have been significantly increased. Hadoop has been widely utilized as a typical distributed storage and processing framework. The tasks in Mapreduce based on the Hadoop distributed file system are allocated to the map as close as possible by considering the data locality. However, there are data being requested frequently according to the data analysis tasks of Mapreduce. In this paper, we propose a hot-data replication mechanism to improve the processing speed of Mapreduce according to data access patterns. The proposed scheme reduces the task processing time and improves the data locality using the replica optimization algorithm on the high access frequency of hot data. It is shown through performance evaluation that the proposed scheme outperforms the existing scheme in terms of the load of access frequency.