Journal of the Korean Electrochemical Society (전기화학회지)

The Korean Electrochemical Society (한국전기화학회)
권호 표지
DOI QR코드

DOI QR Code

Principles and Comparative Studies of Various Power Measurement Methods for Lithium Secondary Batteries

리튬이차전지 출력측정법의 원리 및 측정법간 비교 연구

  • Lee, Hye-Won (Department of Chemical and Biological Engineering, Hanbat National University) ;
  • Lee, Yong-Min (Department of Chemical and Biological Engineering, Hanbat National University)
  • 이혜원 (한밭대학교 화학생명공학과) ;
  • 이용민 (한밭대학교 화학생명공학과)
  • Received : 2012.06.13
  • Accepted : 2012.08.17
  • Published : 2012.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

As the market of lithium secondary batteries moves from mobile IT devices to large-format electric vehicles or energy storage systems, the strengthened battery specifications such as long-term reliability longer than 10 years, pack-level safety and tough competitive price have been required. Moreover, even though high power properties should also be achieved for hybrid electric vehicles, it is not easy to measure accurate power values at various conditions. Because it is difficult to choose a proper measurement method and its experimental condition is more complex comparing to capacity measurement. In addition, the power values are very sensitive to power duration time, state-of-charge (SOC) of cells, cut-off voltages, and temperatures, whereas capacity values are not. In this paper, we introduce three kinds of power measurement methods, hybrid pulse power characterization (HPPC) suggested by US FreedomCar, so-called J-pulse by Japan electric vehicle association standards (JEVS) and constant power measurement, respectively. Moreover, with pouch-type unit cells for HEV, experimental power data are discussed in order to compare each power measurement.

리튬이차전지의 수요가 소형 휴대용 전자기기에서 중대형 전기자동차와 에너지저장장치로 변화함에 따라, 요구되는 전지 특성도 크게 달라지고 있다. 10년 이상의 장기 신뢰성, 팩 수준의 안전성, 가격 경쟁력 확보 등 기존 소형 전지보다 크게 강화된 요구 조건뿐만 아니라, 고출력 특성도 함께 필요로 한다. 그런데, 출력을 측정하기 위해서는 전압과 전류가 동시에 측정 및 제어되어야 하기 때문에, 기존의 단위셀 용량 측정보다 훨씬 어렵다. 또한, 측정 방법의 선택뿐만 아니라 출력유지시간, 충전상태(State-of-Charge, SOC), Cut-off 조건, 측정온도 등의 측정 조건에 따라서도 그 측정값이 크게 달라지는 경향이 있다. 본 논문에서는 HPPC (Hybrid Pulse Power Characterization)법, J-pulse(Japan Electric Vehicle Association Standards, JEVS D 713)법, 정출력 측정법(Constant Power Measurement)의 측정 원리 및 실제 실험에 어떻게 적용해야 하는지 설명하고, HEV(Hybrid Electric Vehicle)용 단위셀을 이용해 출력법간 측정 결과를 비교 분석한다.

Keywords

References

  1. M. H. Ryou, Y. M. Lee, J. K. Park, and J. W. Choi, 'Mussel-inspired polydopamine-treated polyethylene separators for high-power Li-ion batteries' Advanced Materials, 23, 3066 (2011). https://doi.org/10.1002/adma.201100303
  2. Y. M. Lee, Y. G. Lee, Y. M. Kang, and K. Y. Cho, 'Nature of Tris(pentafluorophenyl)borane as a functional additive and its contribution to high-rate performance in lithium ion secondary battery' Electrochemical and Solid-state Letters, 13(5), A55 (2010). https://doi.org/10.1149/1.3329703
  3. G. Hunt, 'FreedomCAR battery test manual for powerassist hybrid electric vehicles', 24, Idaho National Engineering & Environmental Laboratory, Idaho (2003).
  4. Japan Electric Vehicle Association, 'Power density and regenerative power density test procedures of sealed nickel-metal hybrid batteries for hybrid-electric vehicles' JEVS D 713, Tokyo (2003).
  5. Verband der Automobilindustrie(VDA), 'Test specification for Li-ion battery systems in hybrid electric vehicles' Berlin (2007).
  6. J. Belt, V. Utgikar, and I. Bloom, 'Calendar and PHEV cycle life aging of high-energy, lithium-ion cells containing blended spinel and layered-oxide cathodes' Journal of Power Sources, 196(23), 10213 (2011). https://doi.org/10.1016/j.jpowsour.2011.08.067
  7. I. Belharouak, G. M. Koenig Jr., and K. Amine, 'Electrochemistry and safety of $Li_{4}Ti_{5}O_{12}$ and graphite anodes paired with $LiMn_{2}O_{4}$ for hybrid electric vehicle Li-ion battery applications' Journal of Power Sources, 196(23), 10344 (2011). https://doi.org/10.1016/j.jpowsour.2011.08.079
  8. S. Yoon, I. Hwang, C. W. Lee, H. S. Ko, K. H. Han, 'Power capability analysis in lithium ion batteries using electrochemical impedance spectroscopy' Journal of Electroanalytical Chemistry, 655, 32 (2011). https://doi.org/10.1016/j.jelechem.2011.02.013
  9. J. P. Christophersen, G. L. Hunt, C. D. Ho, D. Howell, 'Pulse resistance effects due to charging or discharging of high-power lithium-ion cells: A path dependence study' Journal of Power Sources, 173(2), 998 (2007). https://doi.org/10.1016/j.jpowsour.2007.08.025
  10. D.P. Abraham, J.L. Knuth, D.W. Dees, I. Bloom, J.P. Christophersen, 'Performance degradation of high-power lithium-ion cells-Electrochemistry of harvested electrodes' Journal of Power Sources, 170(2), 465 (2007). https://doi.org/10.1016/j.jpowsour.2007.03.071

Cited by

  1. The effects of humidity on the self-discharge properties of Li(Ni1/3Co1/3Mn1/3)O2/graphite and LiCoO2/graphite lithium-ion batteries during storage vol.7, pp.18, 2017, https://doi.org/10.1039/C6RA28516C
  2. Model-based unscented Kalman filter observer design for lithium-ion battery state of charge estimation 2017, https://doi.org/10.1002/er.3954
  3. Dopamine as a Novel Electrolyte Additive for High-Voltage Lithium-Ion Batteries vol.8, pp.33, 2016, https://doi.org/10.1021/acsami.6b06074
  4. A facile approach to prepare biomimetic composite separators toward safety-enhanced lithium secondary batteries vol.5, pp.49, 2015, https://doi.org/10.1039/C5RA01061F
  5. The role of nanoscale-range vanadium treatment in LiNi0.8Co0.15Al0.05O2 cathode materials for Li-ion batteries at elevated temperatures vol.3, pp.25, 2015, https://doi.org/10.1039/C5TA01571E
  6. Elucidating the Polymeric Binder Distribution within Lithium-Ion Battery Electrodes Using SAICAS vol.19, pp.13, 2018, https://doi.org/10.1002/cphc.201800072