• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.103-108
• /
• 2006

Short-range wireless communication and networking technologies are becoming increasingly important in enabling useful mobile applications. for example, ZigBee technology is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years. In addition, ZigBee can be implemented in mesh networks larger than is possible with Bluetooth. The main features of this ZigBee standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among fixed, portable and moving devices. Home network/Home automation is one of the key market areas for Zigbee, with an example of a simple network This paper investigates the effect of short range wireless channel on the performance of Zigbee system and DSSS-BPSK signal transmission in AWGN, interference and Rician fading environments. And we investigate performance degradation due to interference and fading effects in short range wireless channel. In particular, the impacts of the fading and interference level on the bit error probability is shown in BER performance figures.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.222-231
• /
• 2011

In this paper, we have proposed a method which can make it possible to stably transmit and receive data like the ARC-164 radio frequency hopping environment as a S/W packet modem with PSK modulation. This is a method that the S/W packet modem with PSK digital modulation and the use of PC sound cards change over from data to voice signals and then transmit/receive data. We confirmed not only that it is possible to solve the slow speed communication with the use of sending data through multi-channels and PSK modulation that has the ability to methodically improve transmission rates, but also that it is possible to send the state of frequency hopping stably. In conclusion, we've confirmed both tactical values that though the transmission rate may be a tad slow, a state of frequency hopping of more than 94% confidence plus voice and data can be sent via radio at the same time. In this paper, the proposed S/W packet modem is only an implemented S/W component, so when we apply it to aircraft that we don't consider EMC problems with, then we have the advantage of a wider use of conventional UHF/VHF/HF radio that is possible to voice communication. If we recognize these operational requirements, we can apply for a lot of field equipment efficiently.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.95-95
• /
• 2014

An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.90-112
• /
• 2006

The main purpose of this study is to develop an economical efficiency and maximize efficient characteristic of national defense supply. It's very important to select a supply unit which is excellent in business because it's maximize its efficiency in procurement. So this study focused on the users' dissatisfactions and the elements which have an effect on procurement, especially when they have a general competition contract. In order to have a good result, we studied the papers from Ministry of National Defense supply headquarters and the National Defense Quality Control Office, and referred to various data which contracted within recent 2 years and collect users' dissatisfactions in 3 years in track and mobile equipment field. And we present a analysis between the dissatisfactions and the elements of procurement method by SPSS 12.0.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.329-332
• /
• 2012

LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.28-35
• /
• 2010

In the display industry, COG bonding method is being applied to production of LCD panels that are used for mobile phones and monitors, and is one of the mounting methods optimized to compete with the trend of ultra small, ultra thin and low cost of display. In COG bonding process, electrical characteristics such as contact resistance, insulation property, etc and mechanical characteristics such as bonding strength, etc depend on properties of conductive particles and epoxy resin along with ACF materials used for COG by manufacturers. As the properties of such materials have close relation to optimization of bonding conditions such as temperature, pressure, time, etc in COG bonding process, it is requested to carry out an in-depth study on characteristics of COG bonding, based on which development of bonding process equipment shall be processed. In this study were analyzed the characteristics of COG bonding process, performed the analysis and reliability evaluation on electrical and mechanical characteristics of COG bonding using ACF to find optimum bonding conditions for ACF, and performed the experiment on bonding characteristics regarding fine pitch to understand the affection on finer pitch in COG bonding. It was found that it is difficult to find optimum conditions because it is more difficult to perform alignment as the pitch becomes finer, but only if alignment has been made, it becomes similar to optimum conditions in general COG bonding regardless of pitch intervals.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.388-394
• /
• 2003

To handle the high level radioactive materials such a spent fuel, the master-slave manipulators (MSM) are widely used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD models using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility, The 3D graphic simulator using the external input device of space ball displays the movement of manipulator. To connect the external input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result shows that the developed simulation system gives much-improved human interface characteristics and shows satisfactory response characteristics in terms of synchronization speed. This should be useful for the development of work's education system in the virtual environment.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.5-16
• /
• 2001

ITS (Intelligent Transport System) has been developed into the full service leading to a new life style with the various services from private sector, which was intended to prevent the traffic accidents and to reduce the traffic jams. Since traveler-type components used in ITS services are not exclusively designed. but they can be one of the existing devices such as mobile phone, PDA, PC, KIOSK and etc. We need to consider that these devices are equipped to support ITS related services. Therefore, this study modeled, through UML, a framework of portable components based on the present national ITS architecture; the purpose being that private companies may be able to develop portable components with concepts of ITS services. The methodology of the modeling process we followed consisted of four steps: (1) analyzing service-related subsystems, (2) generalizing equipment-package and functional specifications. (3) describing information and function specific reference models, and (4) UML modeling of the reference model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2279-2284
• /
• 2011

Recently as AR(Augmented Reality) is focus of attention, AR is applied to various fields and is expected its valuable use. In this paper, we suggested the method to combine existing e_Book with augmented reality technology based on mobile equipment. We ascertained that augmented reality contents implemented on PC work well in pITX embedded lines (CPU Intel ATOM Z530) and we implemented augmented reality using marker in e_ Book in pITX embedded lines through these experiments. As the result of it, we could show the contents at the same time which had difficulty to be expressed on e_Book before. Also the existing augmented reality contents could be used as it is. Finally we expected that the user could interact with virtual contents or services directly and intuitively in the real world.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.10-18
• /
• 2016

The cognitive ability of humans depends much on the vision. 'Vision' refers to the sense that receives stimulus of light through eyes. 'Gaze' refers to a function of a straight line that connects the central point of the pupil and a viewpoint in the external world, and, in general, it means a straight line that connects an object that is viewed and the eyes. There are active studies on the gaze in various academic circles including 'psychology' and 'cognitive linguistics.' As a method to objectively analyze the gaze, studies on 'eye tracking' are revitalized. A device for studies on eye tracking is an 'eye tracker.' As the fields of the study expand from development and analysis of Web pages to analysis of stores, methods of traffic signal processing, transport equipment, analysis of user experiences on image contents, and marketing analysis, there occurs a greater demand for a glasses eye-tracking than that for a fixed eye tracker. This study identifies the overview and characteristics of eye tracking and presents a way for spreading studies on eye tracking.