Browse > Article

A Study on the Bonding Performance of COG Bonding Process  

Choi, Young-Jae (Digital Collaboration Center, Korea Institute of Industrial Technology)
Nam, Sung-Ho (Manufacturing Convergence R&D Department, Korea Institute of Industrial Technology)
Kim, Kyeong-Tae (Manufacturing System R&D Department, Korea Institute of Industrial Technology)
Yang, Keun-Hyuk (LG Display Co., Ltd)
Lee, Seok-Woo (Manufacturing System R&D Department, Korea Institute of Industrial Technology)
Publication Information
Journal of the Korean Society for Precision Engineering / v.27, no.7, 2010 , pp. 28-35 More about this Journal
Abstract
In the display industry, COG bonding method is being applied to production of LCD panels that are used for mobile phones and monitors, and is one of the mounting methods optimized to compete with the trend of ultra small, ultra thin and low cost of display. In COG bonding process, electrical characteristics such as contact resistance, insulation property, etc and mechanical characteristics such as bonding strength, etc depend on properties of conductive particles and epoxy resin along with ACF materials used for COG by manufacturers. As the properties of such materials have close relation to optimization of bonding conditions such as temperature, pressure, time, etc in COG bonding process, it is requested to carry out an in-depth study on characteristics of COG bonding, based on which development of bonding process equipment shall be processed. In this study were analyzed the characteristics of COG bonding process, performed the analysis and reliability evaluation on electrical and mechanical characteristics of COG bonding using ACF to find optimum bonding conditions for ACF, and performed the experiment on bonding characteristics regarding fine pitch to understand the affection on finer pitch in COG bonding. It was found that it is difficult to find optimum conditions because it is more difficult to perform alignment as the pitch becomes finer, but only if alignment has been made, it becomes similar to optimum conditions in general COG bonding regardless of pitch intervals.
Keywords
Bonding Process; Chip-On-Glass(COG); Pre-Bonding; Main-Bonding; Fine Pitch; Anisotropic Conductive Film(ACF);
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Choi, Y.J., Nam, S. H., Kang, H. W. and Lee, S. W., "Bonding Process Monitoring & Analysis System," Proc. of KSPE Autumn Conference, pp. 721-722, 2009.
2 Koo, J. M. and Jung, S. B., "Interfacial Reaction and Bump Shear Property of Electroplated Sn-37Pb Solder Bump with Ni Under Bump Metallization during Multiple Reflows," Adv. Mater. Research, Vol. 15-17(THERMEC 2006 Supplement), pp. 181-186, 2006.
3 Fu, Y., Wang, Y., Wang, X. and Liu, J., "Experimental and Theoretical Characterization of Electrical Contact in Anisotropically Conductive Adhensive," IEEE Trans. Adv. Packag., Vol. 23, No. 1, pp. 15-21, 2000.   DOI   ScienceOn
4 Liu, J., "Conductive Adhesive for Electronics Packaging," Electrochemical Publications LTD, Port Erin, pp. 6-12, 1999.
5 Choi, Y. J., Lee, S. W. and Nam, S. H., "FLIP CHIP Bonding Optimization of CCM(Compact Camera Module)," Proc. of KSPE Autumn Conference, pp. 41-42, 2008.
6 Sony Chemical Data Sheet, "Anisotropic Conductive Film Technical Data," 2001.
7 Hitachi Chemical Data Sheet, "Anisotropic Conductive Film Technical Data," 2008.
8 JEDEC Standard, "Thermal Shock," JESD22-A106-A, 1995.
9 Kim, Y. J., Kim, E. R. and Ihm, D. W., "Anisotropic Conductive Film (ACF) prepared from epoxy-rubber resins and its fabrication and reliability for LCD," Journal of Information Display, Vol. 4, No. 1, pp. 17- 23, 2003.   과학기술학회마을   DOI
10 Matsuda, K. and Watanabe, I., "Recent progress toward anisotropic conductive film in flat panel display and semiconductor packaging applications," IEEE Proceeding of HDP, pp. 8-13, 2004.
11 Cho, H. M. and Lee, Y. H., "Determination of Production Target for the TFT-LCD Manufacturing Line," Korean Academy of International Business, Vol. 11, No. 2, pp. 23-29, 2000.
12 Nishib, T., "Future for Low-Temperature polycryatalline silicon," Eurodisply 2002 Conference, pp. 269-272, 2002.
13 Ibarak, N., "Low-temperature Poly-Si TFT Technology," SID 99 Digset, pp. 407-413, 1999.
14 Jeong, I. J. and Lee, Y. S., "A case study of the development of standard production information system in TFT-LCD factory," Journal of the Society of Korean Industrial and Systems Engineering, Vol. 28, No. 1, pp. 41-48, 2005.   과학기술학회마을
15 Kim, J. H., Kang, I. S., Song, C. J., Hur, Y. J, Kim, H. N., Baek, E. and Seo, T. J., "Flip-chip packaging solution for CMOS image sensor device," Microelectron. Relia, Vol. 44, No. 1, pp. 155-161, 2004.   DOI   ScienceOn
16 Ko, K. W., Kim, D. H., Kim, M. Y. and Kim, J. H., "An automatic optical inspection system for inspection of CMOS compact camera module assembly," Int. J. of Precision Engineering and Manufacturing, Vol. 10. No. 5, pp. 67-72, 2009.   과학기술학회마을   DOI
17 Yim, M. J. and Park, K. W., "The contact resistance and reliability of anisotropically conductive film," IEEE Transactions on Advanced Packaging, Vol. 22, No. 2, pp. 166-173, 1999.   DOI   ScienceOn
18 Park, C. H., Chang, K. S., Hwang, J. H. and Kim, B. S., "Development of an ultra precision machine tool for micromachining on large surfaces," Int. J. of Precision Engineering and Manufacturing, Vol. 10, No. 4, pp. 85-91, 2009.   과학기술학회마을   DOI