• 제목/요약/키워드: mobile density

검색결과 323건 처리시간 0.035초

TVS법을 이용한 강유전체 박막내에서의 mobile charge밀도 산출 (Calculation of mobile charge density in ferroelectric films using TVS(Triangular Voltage)

  • 김용성;정순원;김채규;김진규;이남열;김광호;유병곤;이원재;유인규
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.433-436
    • /
    • 1999
  • In this paper we applied TVS(Triangular Voltage Sweep) method to calculate the mobile ionic charge densities in some ferroelectric thin films. During the measurement, the temperature of specimens were maintained at 20$0^{\circ}C$. By this method, the amount of mobile ionic charge Q$_{m}$ and mobile ionic charge density N$_{m}$ of a MFIS structure were calculated 3.5 [pC] and about 4.3$\times$10$^{11}$ [ions/cm$^2$], respectively. In order to successful TVS measurement, the gate leakage current density of films must be low 10$^{-9}$ (A/cm$^2$) order.der.

  • PDF

모바일 애드 혹 네트워크에서 LTD(Load Tolerance Density-distribution)를 이용한 효율적인 분산경로에 관한 연구 (A Study of Efficiency Distributed routing path using LTD(Load Tolerance Density-distribution) in Mobile Ad-hoc Networks)

  • 오동근;오영준;이강환
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 춘계학술대회
    • /
    • pp.105-107
    • /
    • 2015
  • 본 논문에서는 네트워크의 유동확률밀도를 이용하여 분산적인 라우팅 경로를 분석하는 LTD(Load Tolerance Density-distribution) 알고리즘을 제안한다. 모바일 애드 혹 네트워크(Mobile Ad-hoc Networks)는 유동성을 가진 노드들로 구성된 네트워크로서, 토폴로지의 변화가 빈번하다. 토폴로지의 변화를 줄이기 위해 계층적 네트워크가 연구되었으나, 특정 클러스터 헤드노드에게 부하가 집중되어 통신이 단절된다. 본 논문에서 제안하는 알고리즘은 포아송 분포를 이용한 노드의 유동확률밀도를 계산하여, 분산적인 라우팅 경로를 제공하는 알고리즘이다. 모의실험에서, 본 논문에서 제안한 알고리즘의 패킷 전송률은 비교 알고리즘에 비해 향상된 결과를 보여주었다.

  • PDF

효과적인 위치 기반 이동 노드 밀집도 계산방법 (Efficient Computing Method for Location-Based Density of Mobile Node)

  • 김인범;서춘원
    • 한국통신학회논문지
    • /
    • 제40권11호
    • /
    • pp.2196-2204
    • /
    • 2015
  • 이동노드의 밀집도 정보는 모바일 IT 기술의 비약적인 발전과 함께 위치기반서비스, 사물인터넷, 스마트그리드, 지능형빌딩시스템 등 최근에 확대되는 다양하고 새로운 분야에 다양하게 활용될 수 있다. 일반적으로 특정 위치에서의 무선 이동노드의 통신 가능한 수신 이동노드는 송신 이동노드의 최대 통신 거리에 따라 가변적이다. 본 논문에서에서 들로네 삼각망을 이용해서 최대 통신거리와는 무관하게 주어진 환경에서의 전체적인 노드들의 상대적 위치를 반영한 이동노드들의 밀집도를 효과적으로 계산하는 방법을 제안한다. 제안된 방법은 사물인터넷과 같이 목적, 기능에 따라 최대 통신거리가 동일하지 않은 통신 디바이스들로 구성된 통신망의 밀집도를 계산하는데 잘 활용될 수 있다. 본 논문에서 제안되는 방법은 위치기반서비스, 사물인터넷, 스마트 그리드, 지능형빌딩 시스템 등에 잘 적용될 수 있다.

Performance Evaluation of Vehicle-mounted Mobile Relay in Next Generation Cellular Networks

  • Heo, Keun-Hang;Kang, Hyun-Sik;Moon, Un-Chul;Lee, Jung-Ryun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권5호
    • /
    • pp.874-887
    • /
    • 2011
  • Compared to nomadic and fixed relay stations, vehicle-mounted mobile relay stations show different characteristics caused by the time-variant topology, due to their mobility. Especially, a relay mounted in a vehicle is differentiated from nomadic or fixed relay by the restricted distance between the relay and associated mobile station and the variable density of relay deployment in a cell. In this paper, we identify the characteristics of vehicle-mounted mobile relay stations and provide some parameters that highly influence the performance of vehicle-mounted relay. Through simulation, we measure the effect of relay density, zone ratio, relay transmission power, and frame transmission mode on the performance of vehicle-mounted relay. The results show that the performance of vehicle-mounted relay is highly susceptible to the above vehicle-mounted relay-specific parameters.

초소형 고집적 모바일 커넥터부품 구조해석 (Structural Analysis of High-Density Mobile Micro-Connector)

  • 전용준;신광호;허영무
    • Design & Manufacturing
    • /
    • 제9권2호
    • /
    • pp.1-5
    • /
    • 2015
  • Recently, as small-sized display products such as mobile phones and digital cameras have become lighter and smaller, the size of electric signal delivery part, connector for the mobile display products, also, needs to become smaller, so high-density integration like shortening the distance between signal delivery media, conductors is necessary. With the micro and high-density integration of the connector, it is necessary to maintain contact to a certain degree for keeping intensity and delivering electric signal smoothly to prevent a defect with a specific impact. Accordingly, this study carried out a structural analysis according to the operating mechanisms of 0.16CHP Class Bottom Contact FPC Connector and 0.24CHP Class BTB Connector mostly used in small-sized mobile display products such as mobile phones and digital cameras. As a result of the analysis, both connectors had lower than 997MPa, yield strength of connector material C5240-XSH, so it is judged that permanent plastic deformation would not occur, and that a contact force between the connector and FPC film occurs to a certain degree, so that there would not be any defect in electric signal delivery.

  • PDF

차세대 군용전원용 500W급 마이크로 터빈 발전기 시스템 설계 (Design of a 500W Class Micro Turbine Generator System as a Next Generation Military Power Source)

  • 최상규;최범석;한용식;우병철;송인혁;민성기;임진식
    • 한국군사과학기술학회지
    • /
    • 제14권6호
    • /
    • pp.1192-1197
    • /
    • 2011
  • Recent developments of small-size unmanned or manned mobile systems such as autonomous robots, exoskeleton or armored suits, micro air vehicles, and unmanned armored vehicles require long-lasting independent power sources of high energy and power density to support the systems' operation for up to 72 hours in the fields. Chemical batteries such as Ni-MH, Li-Ion, the current primary power sources for mobile devices, however, are not capable of providing enough power and energy density for the next generation high power mobile machines. For this reason, KIMM along with KERI and KIMS has been carrying out a 500W MTG development project under the DAPA's "Next generation military power source R&D program" since 2009. In this paper, a design process for a 500W MTG system currently being developed at KIMM is briefly described and the technical issues related to its development are addressed.

삼각전압소인법을 이용한 강유전체 박막내에서의 분극 및 유동이온에 대한 평가 (Evaluation of polarization and mobile charge in ferroelectric films using TVS(Triangular Voltage Sweep) method)

  • 김용성;이남열;정순원;김진규;정상현;김광호;유병곤;이원재;유인구
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.86-89
    • /
    • 2000
  • The detection technique both the polarization and the mobile charge density at the same time in ferroelectric films on Si using TVS method have been proposed. This method yields a polarizable and an ionic displacement current peaks whose areas are proportional to the total polarization reversal charge and the total moble ionic space charge, respectively. The calculated polarization and the mobile charge density were 0.42 [$\mu$C/$\textrm{cm}^2$] and 5.5$\times$10$^{11}$ (ions/$\textrm{cm}^2$) in the SBT film of MFIS structure measured at 25$0^{\circ}C$, and 1.4 [$\mu$C/$\textrm{cm}^2$] in the LiNbO$_3$ film of MFS structure measured at 30$0^{\circ}C$, respectively.

  • PDF

Uniform large scale cohesionless soil sample preparation using mobile pluviator

  • Jamil, Irfan;Ahmad, Irshad;Ullah, Wali;Junaid, Muhammad;Khan, Shahid Ali
    • Geomechanics and Engineering
    • /
    • 제28권5호
    • /
    • pp.521-529
    • /
    • 2022
  • This research work deals with the development of air pluviation method for preparing uniform sand specimens for conducting large scale laboratory testing. Simulating real field conditions and to get reliable results, air pluviation method is highly desirable. This paper presents a special technique called air pluviation or sand raining technique for achieving uniform relative density. The apparatus is accompanied by a hopper, shutters with different orifice sizes and numbers and set of sieves. Before using this apparatus, calibration curves are drawn for relative density against different height of fall (H) and shutter sizes. From these calibration curves, corresponding to the desired relative density of 60%, the shutter size of 13mm and height of fall of 457.2 mm, are selected and maintained throughout the pluviation process. The density obtained from the mobile pluviator is then verified using the Dynamic Cone Penetrometer (DCP) test where the soil is poured in the box using defined shutter size and fall height. The results obtained from the DCP test are averaged as 60±0.5 which was desirable. The mobile pluviator used in this research is also capable of obtaining relative densities up to 90%. The instrument is validated using experimental and numerical approach. In numerical study, Plaxis 3D software is used in which the soil mass is defined by 10-Node tetrahedral elements and 6-Node plate is used to simulate plate behavior in the validation phase. The results obtained from numerical approach were compared with that of experimental one which showed very close correlation.

Research of Adaptive Transformation Method Based on Webpage Semantic Features for Small-Screen Terminals

  • Li, Hao;Liu, Qingtang;Hu, Min;Zhu, Xiaoliang
    • ETRI Journal
    • /
    • 제35권5호
    • /
    • pp.900-910
    • /
    • 2013
  • Small-screen mobile terminals have difficulty accessing existing Web resources designed for large-screen devices. This paper presents an adaptive transformation method based on webpage semantic features to solve this problem. According to the text density and link density features of the webpages, the webpages are divided into two types: index and content. Our method uses an index-based webpage transformation algorithm and a content-based webpage transformation algorithm. Experiment results demonstrate that our adaptive transformation method is not dependent on specific software and webpage templates, and it is capable of enhancing Web content adaptation on small-screen terminals.

High-Pixel-Density PenTile $Matrix^{TM}$ RGBW Displays for Mobile Applications

  • Credelle, Thomas.L.;Brown Elliott, Candice.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.867-872
    • /
    • 2005
  • High-pixel-density displays are now under development to meet the needs of next-generation mobile devices; methods to more efficiently build such displays are described. Displays based on subpixel rendering and RGBW technologies, known as PenTile $Matrix^{TM}$ RGBW, are shown to offer the best approach to meeting the demanding requirements of low manufacturing cost, high brightness, and low power.

  • PDF