• 제목/요약/키워드: mixing speed

검색결과 509건 처리시간 0.022초

대전류 고속 TIG 용접 특성에 미치는 He 혼합비의 영향 (Effect of Be Mixing Ratio on the Characteristics of TIG Welding with High Current and High Speed)

  • 오동수;김영식;조상명
    • Journal of Welding and Joining
    • /
    • 제23권3호
    • /
    • pp.54-60
    • /
    • 2005
  • Tungsten Inert Gas(TIG) welding is today one of the most popular arc welding process because of its high quality welds and low equipment costs. Even if welding productivity increases with welding speed and current, this strategy is limited by the appearance of defects such as undercut and humping bead due to the depressed molten metal. The purpose of this study investigates the effect of He mixing ratio on the characteristics with high current and speed in TIG welding. The conclusions obtained permit to explain the arc start characteristics quantitatively and the maximum welding speed on stable bead formation with He mixing ratio for high current and speed TIG welding observed in experiments. Also through the relation of the maximum arc pressure and surface depression depth at high current and speed TIG welding, it made clear the mechanism of unstable bead formation.

생체흡수성 HA/PLLA 복합재료의 용융혼련조건이 파괴특성에 미치는 영향 (Effect of Melt-mixing Conditions on Fracture Properties of Bioabsorbable HA/PLLA Composite Materials)

  • 박상대;이덕보
    • 대한기계학회논문집A
    • /
    • 제31권7호
    • /
    • pp.732-738
    • /
    • 2007
  • Effects of melt-mixing conditions on fracture properties of hydroxyapatite filled bioabsorbable poly(L-lactic acid)(HA/PLLA) composites was investigated by measuring the firacture toughness value of HA/PLLA composites prepared under different mixing time and rotor speed. The fracture surface morphology was also examined by profile measurement and scanning electron microscopies. It was found that the fracture toughness of HA/PLLA composites decreases due to decrease of ductile deformation of PLLA matrix and debonding of interfaces with increase of the rotor speed and mixing time. Effect of mixing process on neat PLLA was also assessed, and it was found that the fracture toughness of PLLA decreases due to disappearance of multiple craze formation and increase of defects. Such thermal and shear-stress degradation were found to be the primary mechanisms of the degradation of HA/PLLA composites during melt-mixing process.

입력변수의 조건에 따른 대기확산모델의 민감도 분석 (Sensitivity Analysis of the Atmospheric Dispersion Modeling through the Condition of Input Variable)

  • 정진도;김장우;김정태
    • 한국환경과학회지
    • /
    • 제14권9호
    • /
    • pp.851-860
    • /
    • 2005
  • In order to how well predict ISCST3(lndustrial Source Complex Short Term version 3) model dispersion of air pollutant at point source, sensitivity was analysed necessary parameters change. ISCST3 model is Gaussian plume model. Model calculation was performed with change of the wind speed, atmospheric stability and mixing height while the wind direction and ambient temperature are fixed. Fixed factors are wind direction as the south wind(l80") and temperature as 298 K(25 "C). Model's sensitivity is analyzed as wind speed, atmospheric stability and mixing height change. Data of stack are input by inner diameter of 2m, stack height of 30m, emission temperature of 40 "C, outlet velocity of 10m/s. On the whole, main factor which affects in atmospheric dispersion is wind speed and atmospheric stability at ISCST3 model. However it is effect of atmospheric stability rather than effect of distance downwind. Factor that exert big influence in determining point of maximum concentration is wind speed. Meanwhile, influence of mixing height is a little or almost not.

전이영역에서의 2단 날개가 있는 접시형 바닥 교반조의 유동 상태 변화 (Flow Pattern Change of Dished Bottom Vessel with Dual Impeller in Transition Region)

  • 고승태
    • Korean Chemical Engineering Research
    • /
    • 제59권1호
    • /
    • pp.94-99
    • /
    • 2021
  • 2단 Rushton turbine 날개를 장착한 접시바닥형 교반조 내의 유동 상태가 어떤 회전수에서 변화하는 현상을 찾아냈다. 층류 영역에서는 회전수를 변화시켜도 안정적인 도넛 링이 형성되어 혼합 패턴에 특이한 변동은 관찰되지 않았다. 전이영역에서의 평바닥형 교반조에서는 회전수에 변화를 주어도 두꺼운 2개의 미혼합 도넛 링에 변화가 없는 반면, 접시바닥형 교반조에서는 회전수가 450 rpm이 되면 두꺼운 2개의 미혼합 도넛 링이 아주 얇은 3개의 도넛 링으로 바뀌어 혼합이 개선되었다. 접시바닷형 교반조에서는 Re=138~178의 영역에서 링 모양의 미혼합 영역이 3곳에서 나타났고 그 크기도 컸지만, 평바닥형 교반조에서는 Re=116~176에서 링모양의 미혼합 영역은 2곳에서 나타났으며 그 크기도 작았다. 이러한 현상이 관찰되는 조건은 전이영역으로, 방해판을 부착하였을 때가 방해판이 없을 때와 비교하여 동력수가 커지기 시작하는 영역임을 알 수 있었다. 또한 교반 레이놀즈수가 300을 넘어 유동 상태에 약간의 난류가 섞이게 되면, 이 같은 흐름 양상의 단절이 해소되어 완전히 혼합되었다.

Study on Flow Mixing Effects in a High-Speed Journal Bearing

  • Chun, Sang-Myung
    • KSTLE International Journal
    • /
    • 제1권2호
    • /
    • pp.76-82
    • /
    • 2000
  • Turbulence in journal bearing operation is examined and the thermal variability is studied for isothermal, convective and adiabatic conditions on the walls under aligned and misaligned conditions. Also, the effects of a contraction ratio at the cavitation region and the mixing between re-circulating oil and inlet oil on the fluid field of oil film are included. An algorithm for the solution of the coupled turbulent Reynolds and energy equations is used to examine the effects of the various factors. Heat convection is found to play only a small role in determining friction and load under no mixing condition. However, under realistic mixing condition, the heat convection cannot be ignored. The wall temperature and heat transfer have been found to be of secondary important factors to the mixing effectiveness at the groove and the final mixture temperature.

  • PDF

연약지반에서 심층혼합처리공법의 개량체 형상변화에 미치는 시공조건 (Effects of construction conditions on deep mixing method for soft ground)

  • 이광열;황재홍
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.809-814
    • /
    • 2009
  • Deep mixing method has been used for ground improvement and foundation system for embankment, port and harbor foundations, retaining wall, and liquefaction mitigations. It has attractive benefits because it is not only improved strength of soft ground but superior for prevention of settlement. However, the quality controls of improved mass affect to the efficiency of the deep mixing method is not properly established. These effects vary depending upon the construction environments and conditions of agitation in consideration of an agitator. The strength and shape of the improved column are not unique and these are affected by mechanical properties of agitators. In this study, in order to investigate the efficiency of deep mixing method for ground improvement on a soft clay ground, experimental studies are performed considering mechanical properties of agitator; the location of exit-hole of admixtures, an angle of mixing wing and a speed of revolution. The experiments are conducted with the simulated apparatus for deep mixing plant that reduced the scale in 1:8 of the real plant. According to the results, the diameter and shape of improved column mass vary depending on the mechanical properties and operating conditions of agitator. Its quality is better when the exit-hole of admixtures is located in the mixing wing, when an angle of mixing wing is large, and when the speed of revolution is rapid.

  • PDF

KORUS-AQ 기간 동안 초기 입력 자료에 따른 WRF 기상장 모의 결과 비교 (Impact of Different Meteorological Initializations on WRF Simulation During the KORUS-AQ Campaign)

  • 문정혁;전원배;이화운
    • 한국환경과학회지
    • /
    • 제29권1호
    • /
    • pp.33-44
    • /
    • 2020
  • Recently, a variety of modeling studies have been conducted to examine the air quality over South Korea during the Korea - United States Air Quality (KORUS-AQ) campaign period (May 1 to June 10, 2016). This study investigates the impact of different meteorological initializations on atmospheric modeling results. We conduct several simulations during the KORUS-AQ period using the Weather Research and Forecasting (WRF) model with two different initial datasets, which is FNL of NCEP and ERA5 of ECMWF. Comparing the raw initial data, ERA5 showed better accuracy in the temperature, wind speed, and mixing ratio fields than those of NCEP-FNL. On the other hand, the results of WRF simulations with ERA5 showed better accuracy in the simulated temperature and mixing ratio than those with FNL, except for wind speed. Comparing the nudging efficiency of temperature and wind speed fields, the grid nudging effect on the FNL simulation was larger than that on the ERA5 simulation, but the results of mixing ratio field was the opposite. Overall, WRF simulation with ERA5 data showed a better performance for temperature and mixing ratio simulations than that with FNL data. For wind speed simulation, however, WRF simulation with FNL data indicated more accurate results compared to that with ERA5 data.

CNG/Diesel Dual-fuel 엔진의 CNG 혼합율에 따른 엔진성능 및 배출가스 특성에 관한 연구 (The Engine Performance and Emission Characteristics of CNG/Diesel Dual-fuel Engine by CNG Mixing Ratio)

  • 최건호;임옥택
    • 한국자동차공학회논문집
    • /
    • 제19권3호
    • /
    • pp.38-43
    • /
    • 2011
  • A CNG/diesel dual-fuel engine uses CNG as the main fuel and injects a small amount of diesel as an ignition priming. This study proposed the modification of the existing diesel engine into a dual-fuel engine that injects diesel with a high pressure by common rail direct injection (CRDI) and by injecting CNG at the intake port for premixing. And experiment was progressed for understanding about effect of CNG mixing ratio. The CNG/diesel dual-fuel engine showed equally satisfactory coordinate torque and power regardless of CNG mixing ratio. The PM emission was low at any CNG mixing ratio because of very small diesel pilot injection. In case of NOx and HC, high CNG mixing ratio showed low NOx and HC emissions at low speed. At medium & high speed, low CNG mixing ratio showed low NOx and HC emissions. Therefore, it would be optimized by controlling CNG mixing ratio.

전산유체역학를 이용한 급속혼화공정 교반효과 및 유동 평가 (Evaluation of the mixing and Hydrodynamic Behavior in rapid mixing stage on using Computational Fluid Dynamics)

  • 조영만;유수전;유평종;김대영;황보봉형
    • 상하수도학회지
    • /
    • 제23권6호
    • /
    • pp.799-810
    • /
    • 2009
  • With time, the stable management of turbidity is becoming more important in the water treatment process. So optimization of coagulation is important for the improvement of the sedimentation efficiency. we evaluated the mixing and hydrodynamic behavior in the coagulation basin using Computational Fluid Dynamics (CFD). The items for evaluation are a location and the speed of agitator and angle of an injection pipe. The results of the CFD simulation, the efficacy of mixing in the coagulation basin was not affected according to one or two injection pipe and angle of an injection pipe. If there is a agitator near outlet of coagulation basin, the efficacy of mixing don't improve even though the speed of agitator increase. So location of agitator is perfect when it locate center at the inlet stream. The coagulation basin at this study, the proper speed of agitator is form 20rpm to 30rpm.

Optimization of β-Cyclodextrin Recycling Process for Cholesterol Removal in Cream

  • Kwak, H.S.;Suh, H.M.;Ahn, J.;Kwon, H.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권4호
    • /
    • pp.548-552
    • /
    • 2001
  • This study was designed to find optimum conditions of four different factors (ratio of solvent to cholesterol-$\beta$-cyclodextrin complex, mixing speed, mixing temperature, and mixing time) for cholesterol dissociation in cream. Using the ratio of 6 to 1 (solvent to the complex) showed the highest cholesterol dissociation rate (82.50%) when mixed at 100 rpm at $50^{\circ}C$ for 1 h. Mixing speed did not significantly affect the cholesterol dissociation. Also, mixing time appeared to be insignificant. The optimum mixing temperature was $50^{\circ}C$ and mixing at $40^{\circ}C$ resulted in a significantly lower rate, compared with that at $50^{\circ}C$. In a subsequent experiment, using recycled $\beta$-cyclodextrin only showed 75.07% of cholesterol removal in cream, while the mixture of recycled to unused $\beta$-CD with the ratio of 6 to 4 increased cholesterol removal to 95.59%, which is highly close to that of 100% unused $\beta$-CD.