• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.940-953
• /
• 2006

The major source of carbon monoxide (CO) at the Earth's surface is the incomplete combustion of biomass and fossil fuels. Because the global lifetime of CO is about two months, it can be used as a tracer for pollution from anthropogenic activities and biomass hurtling. In this paper, we introduced the principle and algorithm of the Measurement of Pollution in the Troposphere (MOPITT) instrument for global CO monitoring. The MOPITT instrument, which was launched on the Satellite Terra in 1999, measures CO column and mixing ratio based on gas correlation radiometry. CO levels can be determined by a retrieval algorithm based on the maximum likelihood method minimizing the difference between observed and modeled radiances. MOPITT level 2 data (HDF format) can be downloaded through the Earth Observing System (EOS) data gateway of NASA. ASCII files of CO parameters can be extracted from HDF files, and then temporal and spatial distributions can be obtained. Finally, we showed an example of CO monitoring in April 2000. The locations of forest fires and distribution of MOPITT CO clearly indicated that not only anthropogenic emissions but also forest fires play an important role in CO levels and global CO distribution. Our introduction to MOPITT and the example of MOPITT data interpretation would be helpful for scientists who want to use the EOS data.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.290-291
• /
• 2022

본 논문에서는 우리나라 2030년 국가 온실가스 감축목표(NDC*, 291백만톤 감축)달성 및 2050년 탄소중립 목표 달성을 위해 필연적으로 수반되는 천연가스 내 수소 혼입에 따른 안전성확보 방안과 수소혼입에 따른 국민 불안감 해소 및 수용성 제고를 위한 대안을 제시하고, 해외 사례를 연구 하였다. 탄소중립은 온실가스(이산화탄소 등)의 배출량을 최대한 줄이고, 남은 온실가스를 흡수, 제거해서 실질적인 배출량이 "0"이 되는 것을 의미하고, 수소혼입은 도시가스의 주성분인 메탄 연소시 발생하는 CO₂를 최소화하기 위해 수소(H₂)를 도시가스에 일정비율 혼합하는 것을 말한다. 본 연구에서는 수소 혼입 시 우려되는 수소취성 및 배관내구성 문제와 수소 특성인 작은 입자로 인한 누출 위험성, 고층에서 메탄과 수소가 분리되는 현상 등에 따른 문제를 도출하고 이에 대한 안전관리 방안도 함께 제시하였다. 또한, 도시가스 배관에 수소 혼입시 천연가스 대체를 통한 온실가스 감축 및 기존 배관망 사용을 통한 경제성 분석결과와 국가 온실가스 감축에 어느 정도 기영할 수 있는지도 함께 기술하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.10
• /
• pp.5-10
• /
• 2020

As the demand for the recycling of industrial by-products increases due to various environmental restrictions including the prohibition of ocean disposal, various studies regarding the recycling of industrial by-products are currently being carried out. One of the industrial by-product, coal ash is produced from thermal power generation; studies on the recycling of fly ash have been actively carried out and it is currently recycled in various fields. In the case of bottom ash, however, only a portion of the total amount generated is primarily processed into a particle size of 2~4mm or less than 2mm to be used for gardening purpose and light weight aggregate and so on. The remaining amount is buried at ash disposal sites. Therefore, various studies are needed to develop measures to use bottom ash. This study aimed at identifying the optimal particle size and mixing ratio of bottom ash to be used as CLSM aggregate. To this end, it evaluated the usability of bottom ash as CLSM aggregate, by investigating the flowability and strength change characteristics of CLSM produced with regard to the mixing ratio of weathered granite soil and bottom ash, particle size of bottom ash to be mixed and soil binder addition rate and conducting a heavy metal leaching test.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.203-210
• /
• 2012

Recently, the interest and demand for large-scale buildings and skyscrapers have been on the rise, and the performance of concrete is an area of high priority. Securing 'mass concrete and high strength concrete' is very important as a key construction technology. For high strength concrete, the high heat of hydration takes place inside the concrete because of the vitality of hydration in cement due to the large amount of powder, and leads to problems such as an increase of thermal stress due to the temperature difference with the outside, which results in cracks and slump loss. For this reason, measures to solve these problems are needed. This study aims to reduce the hydration heat of high strength concrete to control the hydration heat of mass concrete and high strength concrete, by replacing the type of admixture, The purpose of this study is to control the hydration heat of high strength concrete and mass concrete. Our idea for this purpose is to apply not only the types and contents of admixture but also incorporation mixing water to ice-flake. As a result of the test, the use of blast furnace slag and fly ash as admixture, and the use of ice-flake as mixing water can improve the liquidity of concrete and reduce slump loss. Significantly dropping the maximum temperature will contribute greatly to reducing cracks due to hydration heat in mass concrete and high strength concrete, and improve quality.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.22-31
• /
• 2019

The flammable liquid conductivity is an important factor in determining the generation of electrostatic in fire and explosion hazardous areas, so it is necessary to study the physical properties of flammable liquids. In particular, the relevant liquid conductivity in the process of handling flammable liquids in relation to the risk assessment and risk control in fire and explosion hazard areas, such as chemical plants, is classified as a main evaluation item according to the IEC standard, and it is necessary to have flammable liquid conductivity measuring devices and related data are required depending on the handling conditions of the material, such as temperature and mixing ratio for preventing the fire and explosion related to electrostatic. In addition, IEC 60079-32-2 [Explosive Atmospheres-Part 32-2 (Electrostatic hazards-Tests)] refers to the measuring device standard and the conductivity of a single substance. It was concluded that there is no measurement data according to the handling conditions such as mixing ratio of flammable liquid and temperature together with the use and measurement examples. We have developed the measurement reliability by improving the structure, material and measurement method of measuring device by referring to the IEC standard. We have developed a measurement device that is developed and manufactured by itself. The test results of flammable liquid conductivity measurement and the data of the NFPA 77 (Recommended Practice on Static Electricity) Annex B Table B.2 Static Electric Characteristic of Liquids were compared and verified by conducting the conductivity measurement of the flammable liquid handled in the fire and explosion hazardous place by using Measuring / Data Acquisition / Processing / PC Communication. It will contribute to the prevention of static electricity related disaster by taking preliminary measures for fire and explosion prevention by providing technical guidance for static electricity risk assessment and risk control through flammable liquid conductivity measurement experiment. In addition, based on the experimental results, it is possible to create a big data base by constructing electrostatic physical characteristic data of flammable liquids by process and material. Also, it is analyzed that it will contribute to the foundation composition for adding the specific information of conductivity of flammable liquid to the physical and chemical characteristics of MSDS.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.144-157
• /
• 2022

Noble gases, which are chemically inert and behave conservatively in marine environments, have been used as tracers of physical processes such as air-sea gas exchange, mixing of water masses, and distribution of glacial meltwater in the ocean. For precise measurements of Ne, Ar, and Kr, we developed a mass spectrometric system consisting of a quadrupole mass spectrometer (QMS), a high vacuum preparation line, an activated charcoal cryogenic trap (ACC), and a set of isotope standard gases. The high vacuum line consists of three sections: (1) a sample extraction section that extracts the dissolved gases in the sample and mixes them with the standard gases, (2) a gas preparation section that removes reactive gases using getters and separates the noble gases according to their evaporation points with the ACC, and (3) a gas analysis section that measures concentrations of each noble gas. The ACC attached to the gas preparation section markedly lowered the partial pressures of Ar and CO₂ in the QMS, which resulted in a reduced uncertainty of Ne isotope analysis. The isotope standard gases were prepared by mixing ²²Ne, ³⁶Ar, and ⁸⁶Kr. The amounts of each element in the mixed standard gases were determined by the reverse isotope dilution method with repeated measurements of the atmosphere. The analytical system achieved precisions for Ne, Ar, and Kr concentrations of 0.7%, 0.7%, and 0.4%, respectively. The accuracies confirmed by the analyses of air-equilibrated water were 0.5%, 1.0%, and 1.7% for Ne, Ar, and Kr, respectively.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.74-82
• /
• 2007

The M-Method that measures the speed of actuator with counting the number of Reaction wheel Tacho Pulse has the many advantages such that a realization is simple and measuring time is uniform, but it also has the disadvantage that measuring speed becomes worse as the wheel speed goes lower. On the contrary, the T-Method that measures the time duration between the pulses is more accurate at lower-speed and its time delay is smaller than M-Method, but its realization is more difficult than M-Method because measuring time is varying with wheel speed variation. Thought M/T Method mixing M-Method with T-Method is widely used in order to measure the speed in the motor industrial area, one of two methods has been used in the spacecraft design area. Therefore, we try to apply both methods together to measuring the speed of Reaction Wheel, the core actuator for low earth orbit satellite. This paper provides the Reaction Wheel simulation board located in the Spacecraft Dynamic Simulator, ground support test set.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.163-170
• /
• 2022

There is a continuous rise in the commercialization of living modified (LM) organisms worldwide. While LM plants have not yet been cultivated in South Korea, research, development, import of products, and registration of related research facilities are progressing. LM plants should be tested in greenhouses and fields during development. Furthermore, environmental risk assessment and safety management should be performed before their release into the environment. Research on LM plant development is conducted in laboratories as well as confined greenhouses and fields. Safety management regulations are provided as combination standards for the LMO Act in each research district. The accidental release of the LM petunia in Japan was a significant incident related to LM plant research. It implies that normal plants within the distance of crossing should be regarded as LM plants. In the United States, LM creeping bentgrass was released into the environment, thus necessitating the establishment of stringent measures to prevent the scattering of LM plant seeds by wind or other mediums. In South Korea, LM Zoysia and LM cotton were released through rainwater. Therefore, safety measures that prevent LM seed mixing and plant vegetative propagules escaping into the environment via rainwater must be established. Preventing the dispersal of unapproved LM plants requires significant time, expenditure, and effort. Researchers should first identify the impact of LM plants on the ecosystem, and steps to avert their environmental release must be implemented.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2016

PURPOSES : This study evaluated the field applicability and laboratory performance of glass fiber-reinforced asphalt (GFRA) mixtures. METHODS : The general hot-mix asphalt (HMA) and GFRA mixtures were paved in five sites, including three national highways, one express highway, and an arterial road, to evaluate field applicability and durability. The plant mixing and construction method for the GFRA were similar to those for the general HMA. The lab performances of the field samples were relatively compared through the mechanical measures from the Marshall stability, indirect tensile strength, and dynamic stability. The field performance was surveyed after a year. RESULTS : The lab tests verified the superior lab performances of the GFRA compared to the general HMA. The Marshall stability of the GFRA increased for about 128% of the general HMA. The indirect tensile strength of the GFRA was 115% greater than that of the general HMA. The dynamic stability of the GFRA resulted in 16,180 reps/mm, which indicated that high rut resistance may be expected. No noticeable defects, such as cracks or deformation, were observed for the GFRA sections after a year. CONCLUSIONS : The lab tests and field survey for the five GFRA sites resulted in superior performances compared to the general HMA. The relatively low-cost GFRA, which required no pre-processing procedures, such as polymer modification, may be a promising alternative to the polymer-modified asphalt mixtures. The long-term performance will be verified by the superior field durability of the GFRA in the near future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.303-309
• /
• 2008

The reduction of risk within the workplace has long been focus of attention both through industry initiatives and legislation. Exposure matrices according to industries and processes treated DMF (N,N-Dimethylformamide) were constructed based on KOSHA (Korean Occupational Safety and Health Agency)'s 2005 exposure database which were gathered from Korean agencies of workplace hazards evaluation for business place. These exposure matrices were assessed by danger value (DV) that was calculated from combination of hazard rating, duration of use rating, and risk probability rating of exposure to chemical hazardous agents in accordance with Hallmark Risk Assessment Tool. The results of risk assessment is divided four kinds of control bands which were related with control measures. The applicability of risk assessment using exposure matrices was performed by field study and survey for high matrices group. This study found that more attentions should be paid to two industries, manufacture of sewn wearing apparel and manufacture of textiles, among 19 industries, and to 3 processes, coating, processing & mixing, and lab, among 80 processes because those were regarded as having the highest risk.