• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.676-682
• /
• 2016

In this study, rainwater-greywater hybrid system was installed and operated for 1 year in order to evaluate its water quantity, water quality, and economic efficiency in building no. 39. This system was expected to overcome each disadvantages of and maximize each advantages. Low-greywater that was washed up from shower room was treated by MBR (Membrane Bioreactor) and ozone oxidation. Rainwater that was collected from the rooftop was stored in a reservoir, and then transferred to the storage tank that was mixed with treated greywater. After 1 year operating in building no. 39, rainwater and greywater was used to supply $2,599m^3$ of toilet flushing water. In terms of water quality, rainwater was satisfied far the greywater reuse standards except for E.coli. Moreover, low greywater quality was acceptable except for E. coli, BOD, SS, and turbidity. In addition, economic analysis was obtained from benefit-cost ratio (B/C) with 1.11. It implies that the feasibility of the project was reasonable. Furthermore, various research and policy to improve the economic efficiency of water recycling facilities is required to expand the use of water recycling facilities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.314-320
• /
• 2022

The function of reinforcing fibers used in building materials is to maintain resistance to bending loads and to function for cracking caused by drying shrinkage. High-density fiber-cement composites are mainly used for linear plates and are used to increase bending resistance. Therefore, tensile properties, bonding strength with cement hydrate, alkali resistance, and the like are required. Recently, as the non-combustible performance has been strengthened, a function to minimize the occurrence of sparks during high-temperature heating has been added. Therefore, the use of organic fibers is limited. In this study, a study was conducted to replace polypropylene used as reinforcing fiber with hemp fiber with excellent heat resistance. Hemp fibers have excellent heat resistance, good affinity with cement, and excellent alkali resistance. Based on the total volume of polypropylene fibers used in the existing formulation, the non-combustible performance was compared and evaluated by using hemp fibers instead of the polypropylene fibers, and basic physical properties such as flexural strength were tested. As a result of conducting a non-combustibility and physical property test using hemp fibers with a fiber length of 7 mm using 2 % and 3 % by weight, it was found that there is no remaining time of the flame, and the flexural strength can be secured at 95 % level of the existing polypropylene fiber.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.112-123
• /
• 2011

This study focused on developing strategies of cyber-compact city, combining compact city with information and communications technologies(ICTs), in order to enhance sustainable transportation. The cyber-compact city development is defined as a development that is able to reduce travel by ICTs and encourage people to use transit or non-motorized vehicles such as bicycles for ICT-induced travel (especially, discretionary travel) by compact and mixed land use. It can be achieved with combining cyber and compact strategies with respect to network, node, and area. For example, ICT network may use transit network facility, a transfer station may be a hub of ICTs, and transit influenced zone may work with ICT service area. We proposed three cohesive strategies for the cyber-compact city based on literature review and case studies on cyber and compact cities. The first strategy is a cohesion between public transportation and telecommunication network by centering on the two for national and urban spatial linkage structure. That is, cities or urban centers and its peripheral areas can be connected by rail network, and extra space of railway network can be used for constructing telecommunication network infrastructure. The second strategy is a cohesion between public transportation node and telecommunication node by building up regional and urban telecommunication centers near to or at main railway stations. For this strategy, telework centers and communication service centers should be established mainly at transfer stations. The third strategy is a cohesion between public transportation impact zone and telecommunication impact zone as transit oriented development.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.63-70
• /
• 2000

Since inorganic pigment, among admixtures used for cement composites, can raise the esthetic value of a building due to its effect of coloring, it can be assumed that the quantity consumed is expected to increase in connection with the recent trend of emphasizing the beautiful sights of the city. We carried out a flow test by changing the mix proportion of the cement mortar mixed with an inorganic pigment, water-cement ratio and pigment mixing ratio in order to present the basic materials for utilizing colored cement mortars. In construction by exploring the effect of inorganic pigments on the workability of cement mortar. In case of red pigment mortar and yellow pigment mortar, the workability was found to be rapidly decreased. To secure proper workability, it is necessary to increase the amount of mixing water, or to use superplasticizer. In case of green pigment mortar, however, it recorded $-2.4{\~}6.9{\%}$, showing that there was almost no change in flow. In case of black pigment mortar, it was also confirmed that there is no need to consider workability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.2
• /
• pp.78-87
• /
• 1999

This study was aimed to establish the method and process of the Biotope Mapping System.(B.M.S.) The main aspects of research for biotope were divided by 4 schemes such as biosphere, geosphere, antroposphere and evaluation informations. The cartographic function of GIS(geographic information system) was also used to mapping them. The B.M.S. had been progressed with 5 steps : (1) making research goals, (2) constructing the graphic and attribute databases, (3) classifying 3 types of biotope such as tree/shrub biotop, grass biotop and wetland biotop. (4) cross-analyzing biotope types against land use, habitat characters, relief characters and danger/disturbance elements, (5) evaluating the biotope's potentialities. Only 3 steps of them were done in this study. The results of applicating the B.M.S on the research site as followings : 1. The interdisciplinary researches were needed to develop the B.M.S in Korea since ecological habitat conditions of Germany, England are differed from them of Korea. 2. The distributions of the land uses in Maejuri, Seunghwan eup in Chonan city were mainly recorded by forest(29.82%), orchard(14.11%) and landscaping around building site(9.05%). 3. The percentages of the Tree/Shrub Biotope type were ranged by the orchard type(23.8%), natural and artificial deciduous type with natural coniferous(23.6%) and etc. 4. The Grass Biotope type was mainly recorded by the wild grassland type(27.99%), garden type(14.21%) and peddy field with wild grassland(13.24%). 5. The distributions of the wetland were pointed high at the wetland type with reed marsh and edge vegetation around wetland(54.79%) and etc.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.453-454
• /
• 2009

In this dissertation, experimental program was carried out to study the hysteretic behavior of the reinforced different floor type interior beam-column joint repeated cyclic loads under seismic actions. The test results was as follow. The reinforced interior beam-column joint, designed by the different floor type, was increased energy dissipation capacity and maximum load carrying capacity according to the increase of different floor in comparison to standard specimen. And it was also dissimilar to failure mode adjacent to joint region. energy dissipation capacity of each specimen, designed by the different floor type, was increased 1.1${\sim}$1.35 times in comparison to standard specimen.

• Journal of architectural history
• /
• v.17 no.5
• /
• pp.39-53
• /
• 2008

This study aims to investigate and analyze the plan and structural system of 4 kan(間) by 4 kan(間) square church built in early 20th century. At that time, three kinds of traditional wooden structure church had been built under the circumstances of transitional era : Basilica style such as Ganghwa Anglican Church, 'ㄱ' shaped style such as Keumsan Church and $4{\times}4$ Square style such as Bukok Church and Jacheon Church that are concerned in this study. Traditional plans and structural system were mixed with new religious function and transformed into korean peculiar style. $4{\times}4$ Square style is a residual product in that process. Despite of it, little concerns on it till now. The results of this study are described as follows. 1. The plan of these $4{\times}4$ square churches is divided into three areas : cathedra($1{\times}1$), attendance($4{\times}2$), and intermediation($4{\times}2$). The location of cathedra is commonly the opposition part of main gate and projected out of the building. Attendance area was also divided into two, man and woman, because of keeping a distance with each other. 2. The structural system of these $4{\times}4$ square churches are somewhat different because of their size and roof style. In the case of Bukok church, $4{\times}4$ square fall off $3{\times}3$ and $2{\times}2$ gradually and turn into paljak(八作) roof, which enable us to get in traditional entering methods. On the contrary, Jacheon church use hipped roof but almost alike pyramidal roof, which could make us not to recognize entering in the aspect of gable part.

• The Journal of Information Systems
• /
• v.33 no.1
• /
• pp.45-68
• /
• 2024

Purpose This paper examines the role of local market-based communities in driving regional revitalization, using detailed analysis of online networks. We aim to dissect a local community's communication network, highlighting members with high engagement levels and exploring their characteristics. Our goal is to identify the conditions that allow local community networks to grow independently and to demonstrate how the activation of these networks contributes to regional revitalization. Design/methodology/approach We employ a mixed-methods approach, combining social network analysis with statistical techniques to investigate the structure of online communication networks. Specifically, we use ANOVA to determine the statistical significance of our findings, ensuring their reliability. To complement our quantitative data, we include qualitative insights from interviews, adding depth and context to our analysis. Findings Our results show that individuals with high centrality in the online network are crucial for maintaining active local communities. We find that leveraging local resources to create a supportive and adaptable environment is essential for the communities' sustainability and expansion. Importantly, our research draws a direct connection between the vitality of local community networks and the broader process of regional revitalization. We argue that energizing local communities is an effective way to address the risk of regional decline. By integrating quantitative analysis with qualitative feedback, this study contributes to the understanding of local market-based communities as key drivers of regional development. It emphasizes the importance of building vibrant, resourceful community networks to revitalize areas experiencing socio-economic challenges.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.1
• /
• pp.20-33
• /
• 2018

Population distribution in urban space varies with transportation flow changing along time of day. Transportation flow is directly affected by the activities of urbanites and the distribution of related facilities, since the flow is the result of moving to the point where the facilities associated with their activities are located. It is thus necessary to analyze the spatio-temporal characteristics of the urban population distribution by integrating the distribution of activity spaces related to the daily life of urbanites and the flow of transportation. The purpose of this study is to analyze the population distribution in urban space with daily and weekly time bases using the building database and T-card database in the city of Seoul, which is rich in information on land use and transportation flow. For a time-based analysis that is difficult to grasp by general statistical techniques, a four-dimensional visualization method combining time and space using a Java program is devised. Dynamic visualization in the four-dimensional space and time allows intuitive analysis and makes it possible to understand more effectively the spatio-temporal characteristics of population distribution. For this purpose, buildings are classified into three activity groups: residential, working, and commercial according to their purpose, and the number of passengers traveling to and from each stop site of bus and subway networks in the T-card database for one week is calculated in one-minute increments, Visualizing these and integrating transportation and land use, we analyze spatio-temporal characteristics of the population distribution in Seoul. As a result, it is found that the population distribution of Seoul displays distinct spatio-temporal characteristics according to land use. In particular, there is a clear difference in the population distribution pattern along the time axis according to the mixed aspects of working, commercial, and residential activities. The results of this study can be very useful for transportation and location planning of city facilities.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.152-157
• /
• 2012

Due to the global warming and energy exhaustion, energy efficiency improvement of construction is recognized the stream of times. To improve the efficiency of the building, in order to energy saving, passive elements should be applied. Then the first step be supposed that applying the new standards about the insulation boundary. The current insulation boundary standards are not reasonable as well as does not divide the purposes. As a result, energy is being wasted and many civil complaints are also occurred. To improve these problems, applying the insulation boundary need to divide the heating and non-heating and subdivide the purpose of construction. In this study, accurate real heating and air conditioning areas are presented that work on the new insulation boundary of purposes and applicable standards. This proposed, by the real heating and air conditioning areas, insulation boundary of purposes, matching the reasonable capacity and load of equipment, by working on standards by optimal maintenance can be energy saving, to present guidelines that environment improvement of actual residents as well as energy saving be expected.