• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.175-181
• /
• 2020

For the success of a structural integrity management, it is essential to acquire structural response data at some critical locations with limited number of sensors. In this study, the structural response of numerical model was estimated by data fusion approach based on the Kalman filter known as stochastic recursive filter. Firstly, transient direct analysis was conducted to calculate the acceleration and strain of the numerical standing beam model, then the noise signals were mixed to generate the numerical measurement signals. The acceleration measurement signal was provided to the Kalman filter as an information on the external load, and the displacement measurement, which was transformed from the strain measurement by using strain-displacement conversion relationship, was provided into the Kalman filter as an observation information. Finally, the Kalman filter estimated the displacement by combining both displacements calculated from each numerically measured signal, then the estimated results were compared with the results of the transient direct analysis.

• 대한전자공학회논문지SP
• /
• 제42권4호
• /
• pp.127-132
• /
• 2005

가상현실을 이용한 사람의 빠른 움직임을 추출하여 파형으로 나타내는 동작곡선이나 자연계에서 실제로 관측되는 대기 전기변동량과 같은 전자계 신호의 시간 변동량은 매우 복잡하다. 이러한 신호의 관측파형에 대하여 변곡점과 같은 신호의 특징을 정확히 결정하는 것이 중요하다. 잡음이 신호에 중첩될 때 종래의 방법으로는 변곡점의 검출이 어렵다. 본 논문에서는 신호에 잡음이 첨가될 때 웨이브릿 임계치 잡음제거와 정규형 자연관측필터를 적용하여 정확한 변곡점 추출이 가능함을 보인다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.21-21
• /
• 1993

The imaging areas of currently available optical detectors are relatively small to cope with large image areas such as telescope focal Planes. One Possibility to obtain large detection areas is to assemble mosaics of Charge Coupled Devices(CCDs) and drive them simultaneously. Parallel driving of many CCDs together rules out the possibility of individual tuning; however such optimisation is very important when the ultimate low light level performance is required particularly for new devices. In this work, a new concept has been developed for an entirely novel approach where the drive waveforms are multiplexed and interleaved. This simultaneously reduces the number of leadout connections and permits individual optimisation efficiently. The controller has been designed to include one electronic of component produced by CAD software where most of the digital circuits are integrated to minimise the component count and improve the efficiency of the system greatly. The software has an open architecture to permit convenient modificationl by the user to fit their specific purposes. The desire of controller allows great flexibility of system parameters by the softwa re, specifically for the compatibility to deal with any number of mixed CCDs and in any format within the practical limit. The system has been integrated to test the performance and the result is discussed for readout noise, system linearity and cross-talk between the CCDs. The system developed in this work can be applicable not only for astro nomical observation with a telescope but also in other related fields for low light level detection systems such as spectroscopic application, remote sensing and X-ray detecti13n systems with large sensing areas and high resolution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.192-193
• /
• 2006

The wet coating process could easily be made from large area film with printing paste mixed with semiconductor and binder material at room temperature. Semiconductor film fabricated about 25mm thickness was evaluated by field emissions-canning electron microscopy (FE-SEM). X-ray performance data such as dark current, sensitivity and signal to noise ratio (SNR) were evaluated. The $Hgl_2$ semiconductor was shown in much lower dark current than the others, but the best sensitivity. In this paper, reactivity and combination character of semiconductor and binder material that affect electrical and X-ray detection properties would prove out though experimental results.

• Tribology and Lubricants
• /
• 제11권4호
• /
• pp.28-34
• /
• 1995

PTFE has good mechanical and chemical stability at wide temperature range, and more over, shows a low value of friction coefficient. On the other hand, it shows cold flow and high wear rate. However, these short comings can be overcome by adding various fillers. In this experiment, PTFE and polyimide powder were mixed into composite and its tribological characteristics was investigated. 100% polyimide was also tested for comparison. The countefface material was a stainless steel (SUS304). Friction and wear tester of ring-on-block type was used at room temperature and under atmosphere. After the wear test, the worn surfaces were examined by optical microscope. The test results show that PTFE-polyimide composite generates. the wear transfer film on both sides of the friction surfaces, and, the friction coefficient and the wear rates are relatively low. 100% polyimide generated little wear transfer films, showed high friction and wear rates, and also showed some problems of vibration and noise. It even damaged the stainless steel countefface. It was concluded that 100% polyimide does not generate transfer film well because its shear resistanbe is high and it stickslips, thus, friction coefficients and wear rates are high. In case of PTFE-polyimide composite, on the other hand, transfer film containing sufficient PTFE adheres and remains on both wear surfaces well enough because PTFE has low shear resistance. Polyimide particles in the composite were proved to be able to bear normal load and does not show stick-slip because they are covered with transfer film containing much PTFE.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3275-3295
• /
• 2012

In this paper, we analyze the performance of an amplify-and-forward (AF) two-way relaying system, where two sources exchange information via the aid of an intermediate relay that is selected among multiple relays according to max-min criterion. We consider a practical scenario, where one source-relay link undergoes Rician fading, and the other source-relay link is subject to Rayleigh fading. To be specific, we derive a tight lower bound for the outage probability. From this lower bound, the asymptotic outage probability and average symbol error rate (SER) expressions are derived to gain insight into the system performance at high signal-to-noise ratio (SNR) region. Furthermore, we investigate the optimal power allocation (PA) with fixed relay location (RL), optimal RL with fixed PA and joint optimization of PA and RL to minimize the outage probability and average SER. The analytical expressions are verified through Monte Carlo simulations, where the positive impact of Rician factor on the system performance is also illustrated. Simulation results also validate the effectiveness of the proposed PA and relay positioning schemes.

• Mass Spectrometry Letters
• /
• 제8권2호
• /
• pp.29-33
• /
• 2017

Understanding the mechanisms that control and concentrate the observed electrospray ionisation (ESI) response from peptides is important. Controlling these mechanisms can improve signal-to-noise ratio in the mass spectrum, and enhances the generation of intact ions, and thus, improves the detection of peptides when analysing mixtures. The effects of different mixtures of aqueous: organic solvents (25, 50, 75%; v/v): formic acid solution (at pH 3.26) compositions on the ESI response and charge-state distribution (CSD) during mass spectrometry (MS) were determined in a group of biologically active peptides (molecular wt range 1.3 - 3.3 kDa). The ESI response is dependent on type of organic solvent in the mobile phase mixture and therefore, solvent choice affects optimal ion intensities. As expected, intact peptide ions gave a more intense ESI signal in polar protic solvent mixtures than in the low polarity solvent. However, for four out of the five analysed peptides, neither the ESI response nor the CSD were affected by the volatility of the solvent mixture. Therefore, in solvent mixtures, as the composition changes during the evaporation processes, the $pK_b$ of the amino acid composition is a better predictor of multiple charging of the peptides.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.87-94
• /
• 2012

기계적 제동방식이 사용되는 전동차는 공기제동과 전기제동을 혼합한 방식으로 최근 녹색성장을 지향하면서 효율개선 및 환경문제 해결을 위한 많은 방법들이 제시되고 있다. 기계적인 제동은 분진, 소음 등의 환경문제와 함께 브레이크 슈와 라이닝 등의 소모품을 교체해야하는 경제적 문제를 가지고 있다. 이러한 단점을 보완하기 위하여 고속 영역에서 정지에 이르는 광범위한 영역에 이르기까지의 전기제동을 필요로 하게 되었다. 본 연구는 구배에 의한 부하토오크를 추정하여 전동차를정지시키는방법에대해연구되어졌으며낙차에따른 토오크를 추정하여 제동하는 방법의 특성을 확인하였다.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.307-315
• /
• 2019

Condition monitoring has been recognized as an effective and low-cost method to enhance the reliability and improve the maintainability of power electronic converters. In power electronic converters, high-frequency oscillation occurs during the switching transients of power transistors, which is known as ringing. The ringing frequency mainly depends on the values of the parasitic capacitance and stray inductance in the oscillation loop. Although circuit stray inductance is an important factor that leads to the ringing, it does not change with transistor aging. A shift in either the inside inductance or junction capacitance is an important failure precursor for power transistors. Therefore, ringing frequency can be used to monitor the health of power transistors. However, the switching actions of power transistors usually result in a dynamic behavior that can generate oscillation signals mixed with background noise, which makes it hard to directly extract the ringing frequency. A frequency extraction method based on empirical mode decomposition (EMD) and Fast Fourier transformation (FFT) is proposed in this paper. The proposed method is simple and has a high precision. Simulation results are given to verify the ringing analysis and experimental results are given to verify the effectiveness of the proposed method.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1034-1038
• /
• 2020

레이더를 통한 표적식별을 효과적으로 처리하기 위해서는 표적에 대한 정확한 신호 정보가 필요하다. 그러나 이러한 표적 신호에는 잡음이 섞여 있는 경우가 일반적이며, 이 부분에 대한 연구가 지속적으로 이루어지고 있다. 특히 표적에 대한 이미지 처리, 표적신호처리, 표적식별 등이 그 예라 할 수 있겠다. 군사적 측면으로 볼 때 표적식별 분야가 중요하므로 본 논문에서는 트리 구조의 퍼지 뉴럴 네트워크를 이용하여 비행체 표적식별에 대한 연구를 수행하였다. 비행체에 대한 반사파 데이터를 활용하여 퍼지 뉴럴 네트워크를 학습시켜 모델에 대한 최적화를 수행하였고, 최적화된 모델에 표적에 대한 테스팅 데이터를 입력하여 표적식별에 대한 실험을 수행하여 그 결과를 통해 제안된 방법의 효용성을 검증하였다.