• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.222-224
• /
• 1975

Three strains of common carp, i. e. , Israeli carp, red-and-white, and golden strains, were stocked in the same pond, and their growth rates were compared with following results: From August 12 to November 21 in 1975, fingerlings of the three strains of common carp, Cyprinus carpo, each weighing about 0.5 g with total length of 2 to 3 cm, were stocked. The pond had an area of $316m^2$ with a mean water depth of 55cm, and the bottom was covered with a 20 to 30 cm thick layer of silt containing a considerable amount of decaying organic materials. Feed given was prepared with equal amounts of fish meal and polished barley, of which, in addition, $10\%$ green grass and $1\%$ table salt were mixed together when prepared into paste feed using a chopper after boiling the barley. Total protein content of the feed was $34.9\%$ in dry state with $5\%$ moisture content. Total feed given was 30.08 kg calculated in dry state to produce 20.588 kg of the common carp fingerlings, thus the feed coefficient being 1.51. By strains, the harvested Israeli carp ranged 98 to 311g each with a mean weight of $172.69g(100\%)$, red-and-white strain 15 to 318g with mean of $104.1g(60.3\%)$, and the golden strain 30 to 268g with mean of $128.7g(74.6\%)$. During the rearing season mean water temperature was $23.9^{\circ}C$ and the assumed main growth period with the water temperature above $15^{\circ}C$ was, upto the end of October, for 80 days with a mean water temperature of $23.9^{\circ}C$. Taking this main growth period as the basis for growth rate analysis, the mean daily increments, expressed as the attained body weight in times of the starting weight, become 1.075786 times (or the Israeli strain, 1.06901 times for the red-and-white strain, and 1.07185 times for the golden strain.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.105-111
• /
• 1997

Root dynamics of a pine stand at Hongcheon, Korea was assayed with two kinds of soil samplers which had been tentatively manufactured to renovate the routine soil sampler, Oakfield soil sampler. Root-mixed soil samples were collected on December of 1995, March, May, August and December of 1996 within each randomly selected 8 plots. The amount of roots collected by the two kinds of soil samplers were not significantly different at the 5% level, which indicated that the renovated sampler was more desirable to be used since the sampler showed efficiencies in time for collection and quantification than the routine sampler. The quantities of total root in 100g soils were 469mg on December of 1995, and 352mg, 473mg, 461mg, 522mg on the following March, May, August and December, respectively. That is, total amount of roots showed the smallest in Spring and reached maximum in early Winter, although the differences were not significant among each season. By the way, the alive roots and dead roots showed significant differences among season, the alive roots took about 90% from May to early December while they decreased down to some 65% from late December to March. The roots of Pinus densiflora S. et Z. took about 46% of total roots although the species comprised 70% of crown layer, and the ratio of fine-roots of the species were higher than that of other species. By the way, the dynamics of total roots and that of alive roots were quite different. Thus, the study for root dynamics such as fine roots which take a major role for mycorrhizae formation or nutrient uptake should not be inferred from the data of total root dynamics but be investigated in detail by dividing them into each class.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2015

Salinity affects sound speed in the low salinity environment, in the seas where freshwater from large rivers and flows into the marginal sea area near the Yangtze River and the Niger River. In this paper, SSC (Surface Sound Channel) formed by low salinity water was investigated in the East China Sea and the Gulf of Guinea of rainy season. The data from KODC (Korea Oceanographic Data Center) in the East China Sea and from ARGO (Array for Real-time Geostrophic Oceanography) in the Gulf of Guinea of the tropical area were used for analysis. SSC haline channel was formed 14 times among 32 SSC occurrences when the 90 data from 9 points were analyzed during a decade (2000 ~ 2009) in the East China Sea. In the Gulf of Guinea, haline channel was formed 18 times among 20 SSC occurrences during 3 years (2006 ~ 2009). When the sound speed gradient was analyzed from temperature-salinity gradient diagram, the gradients of both salinity and temperature affect SSC formation in the East China Sea. In contrast, the salinity gradient mostly affects SSC formation due to the least change of temperature in the well-developed mixed layer in the Gulf of Guinea. Their acoustic characteristics show that channel depth is 6.5 m, critical angle is $1.5^{\circ}$ and difference of transmission loss between surface and thermocline is 11.5 dB in the East China Sea, while channel depth is 18 ~ 24 m, critical angle is $4.0{\sim}5.4^{\circ}$ and difference of transmission loss is 21.5 ~ 27.9 dB in the Gulf of Guinea. These results are expected to be used as a basic understanding of the acoustic transmission changes due to low salinity water at the estuaries and the ocean with heavy precipitation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.36-48
• /
• 2010

The objectives of this study are to research and analyze the positioning of Mt. Back Hwa(白華山) and the characteristics of its neighboring cultural scenery based on the Two Seated Buddah Temple, a small Buddhist temple of Taeul in Taean and to view both landscape geographic codes and religious attractions over Mt. Back Hwa by discussing its expression and meaning for the scenery scattered or nested over this districts. The panoramic view of west shows the character of Mt. Back Hwa as a magnanimity of Buddhist Goddess of Mercy which is viewed as a view point field no less than its location as a landscape target and its singularity as a rocky mountain. The ancient castle, signal beacon post and the small Buddhist temple of Taeul to be read importantly in the old map and SinjeungDongkukyeojiseungram(新增東國輿地勝覽) form the core of place identity, and a number of carve(engrave) letters such as Eopungdae(御風臺), Youngsadae(永思臺), etc. show the prospect of this mountain and monumentality derived from place characteristics. In addition removing of Taeiljeon, a portrait scroll of Dangun, national ancestor makes possible to guess the national status hold by Mt. Back Hwa in advance and to know that it has symbiotic relationship with indigenous religion and shares with the universal locality which have been continued for a long time through a portrait scroll of Dangun enshrined in Samsunggak. More than anything else, however the Rock-carved Buddha Triad in Taean, Giant Buddha of Baekjae era enshrined in the small Buddhist temple of Taeul is not only why Mt. Back Hwa, magnanimity of Buddhist Goddess of Mercy exists but also a signifier. In spite of such a placity, the union ideas of confucianism, buddhism and doctrinism of buddhism prevailed in the Late Joseon Dynasty allows the cultural phenomenon of taoism to be read in the same weight through Ilsogae(一笑溪) and Gammodae(感慕臺) which are mountain stream and pond area respectively centered in the carve letter, 'Taeeuldongcheon(太乙洞天)' constructed in front of the small Buddhist temple of Taeul, the Baduk board type of rock carvings engraved over them and a number of traces of carve letters made by confucian scholars since the Middle of Joseon Dynasty. The reason such various cultural sceneries are mixed in Mt. Back Hwa is in the results of inheritance of religious places and fusion of sprit of the times, and the various type of cultural scenery elements scattered in Mt. Back Hwa are deemed as unique geographic code to understand the multi-layered placity and the characteristics of scenery of Mt. Back Hwa in Taean.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.125-133
• /
• 2010

Objectives: Rapid polymerization of overlying composite resin causes high polymerization shrinkage stress at the adhesive layer. In order to alleviate the shrinkage stress, increasing the light intensity over the first 5 seconds was suggested as an exponential curing mode by an LED light curing unit (Elipar FreeLight2, 3M ESPE). In this study, the effectiveness of the exponential curing mode on reducing stress was evaluated with measuring microtensile bond strength of three adhesives after the overlying composite resin was polymerized with either continuous or exponential curing mode. Methods: Scotchbond Multipurpose Plus (MP, 3M ESPE), Single Bond 2 (SB, 3M ESPE), and Adper Prompt (AP, 3M ESPE) were applied onto the flat occlusal dentin of extracted human molar. The overlying hybrid composite (Denfil, Vericom, Korea) was cured under one of two exposing modes of the curing unit. At 48h from bonding, microtensile bond strength was measured at a crosshead speed of 1.0 mm/min. The fractured surfaces were observed under FE-SEM. Results: There was no statistically significant difference in the microtensile bond strengths of each adhesive between curing methods (Two-way ANOVA, p > 0.05). The microtensile bond strengths of MP and SB were significantly higher than that of AP (p < 0.05). Mixed failures were observed in most of the fractured surfaces, and differences in the failure mode were not observed among groups. Conclusion: The exponential curing method had no beneficial effect on the microtensile dentin bond strengths of three adhesives compared to continuous curing method.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Membrane Journal
• /
• v.11 no.4
• /
• pp.143-151
• /
• 2001

We have fabricated mixed-ionic conducting membranes, L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ and L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ by the solid state method. Ceramic membranes consisted of perovskite-type structures and exhibited high relative density, >95%. Especially, dense L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ layer was coated on the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes by using screen printing technique in order to improve oxygen ion flux. We measured oxygen ion flux on uncoated L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/, uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/, and coated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes. The L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ membranes showed the highest flux, 0.26 mL/min.$\textrm{cm}^2$ at 90$0^{\circ}C$, after steady state had been reached. The oxygen flux of coated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes showed higher value, 0.19 mL/min.$\textrm{cm}^2$ at 95$0^{\circ}C$. This flux was as much as 2 or 3 times higher than those of uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membranes. 3-$\delta$/ membranes.X> 3-$\delta$/ membranes.membranes.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.257-274
• /
• 2018

The purpose of this study was to evaluate the effect of acid-treatment conditions on the surface properties of the RBM (Resorbable Blast Media) treated titanium. Disk typed cp-titanium specimens were prepared and RBM treatments was performed with calcium phosphate ceramic powder. Acid solution was mixed using HCl, $H_2SO_4$ and deionized water with 4 different volume fraction. The RBM treated titanium was acid treated with different acid solutions at 3 different temperatures and for 3 different periods. After acid-treatments, samples were cleaned with 1 % Solujet solution for 30 min and deionized water for 30 min using ultrasonic cleanser, then dried in the electrical oven ($37^{\circ}C$). Weight of samples before and after acid-treatment were measured using electric balance. Surface roughness was estimated using a confocal laser scanning microscopy, crystal phase in the surface of sample was analyzed using X-ray diffractometer. Surface morphology and components were evaluated using Scanning Electron Microscope (SEM) with Energy Dispersive X-ray spectroscopy (EDX) and X-ray Photoemission Spectroscopy (XPS). Values of the weight changes and surface roughness were statistically analyzed using Tukey-multiple comparison test (p=0.05). Weight change after acid treatments were significantly increased with increasing the concentration of $H_2SO_4$ and temperature of acid-solution. Acid-treatment conditions (concentration of $H_2SO_4$, temperature and time) did not produce consistent effects on the surface roughness, it showed the scattered results. From XRD analysis, formation of titanium hydrides in the titanium surface were observed in all specimens treated with acid-solutions. From XPS analysis, thin titanium oxide layer in the acid-treated specimens could be evaluated. Acid solution with $90^{\circ}C$ showed the strong effect on the titanium surface, it should be treated with caution to avoid the over-etching process.

• Korean Journal of Dental Materials
• /
• v.44 no.3
• /
• pp.263-272
• /
• 2017

In this study, antibacterial chlorhexidine (CHX)-containing hydroxyapatite (HAp) was coated on titanium and investigated its characteristics. Ti-mSBF-CHX group was prepared by soaking titanium disks in the modified simulated body fluid (mSBF) mixed with CHX. Ti-mSBF group was coated using mSBF without CHX. Ti-mSBF-adCHX group was prepared by soaking Ti-mSBF specimen in CHX-containing solution. The crystallines clusters composed with nano-shaped crystallites were coated on the surface of the Ti-mSBF specimen. The ribbon-shaped crystallites were observed with the crystalline clusters on the Ti-mSBF-CHX specimen. The content of CHX chemical compositions was high in ribbon-shaped crystallites. HAp crystalline structure was dominant for all prepared specimens, and ${\beta}-TCP$ (tricalcium phosphate) and OCP (octacalcium phosphate) crystalline structures were observed in the Ti-mSBF-CHX specimen. FT-IR spectra showed the strong peaks of CHX in Ti-mSBF-adCHX and Ti-mSBF-CHX groups. However, after immersing in a phosphate buffered saline (PBS), CHX was rapidly released in Ti-mSBF-adCHX group, while it was slowly released in Ti-mSBF-CHX. We expect that the coating method of Ti-mSBF-CHX group could be used for protecting inflammation of titanium implant by incorporating antibacterial agent CHX into HAp layer.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.536-555
• /
• 2021

Sea-surface wind is an important variable in ocean-atmosphere interactions, leading to the changes in ocean surface currents and circulation, mixed layers, and heat flux. With the development of satellite technology, sea-surface winds data retrieved from scatterometer observation data have been used for various purposes. In a complex marine environment such as the Korean Peninsula coast, scatterometer-observed sea-surface wind is an important factor for analyzing ocean and atmospheric phenomena. Therefore, the validation results of wind accuracy can be used for diverse applications. In this study, the sea-surface winds derived from ASCAT (Advanced SCATterometer) mounted on MetOp-A/B (METeorological Operational Satellite-A/B) were validated compared to in-situ wind measurements at 16 marine buoy stations around the Korean Peninsula from January to December 2020. The buoy winds measured at a height of 4-5 m from the sea surface were converted to 10-m neutral winds using the LKB (Liu-Katsaros-Businger) model. The matchup procedure produced 5,544 and 10,051 collocation points for MetOp-A and MetOp-B, respectively. The root mean square errors (RMSE) were 1.36 and 1.28 m s^-1, and bias errors amounted to 0.44 and 0.65 m s^-1 for MetOp-A and MetOp-B, respectively. The wind directions of both scatterometers exhibited negative biases of -8.03° and -6.97° and RMSE values of 32.46° and 36.06° for MetOp-A and MetOp-B, respectively. These errors were likely associated with the stratification and dynamics of the marine-atmospheric boundary layer. In the seas around the Korean Peninsula, the sea-surface winds of the ASCAT tended to be more overestimated than the in-situ wind speeds, particularly at weak wind speeds. In addition, the closer the distance from the coast, the more the amplification of error. The present results could contribute to the development of a prediction model as improved input data and the understanding of air-sea interaction and impact of typhoons in the coastal regions around the Korean Peninsula.