• 한국방재학회 논문집
• /
• 제8권1호
• /
• pp.139-143
• /
• 2008

택지개발사업현장에서 발생하는 대규모 매립쓰레기의 합리적인 처리를 위하여 매립쓰레기를 굴착하여 토사류, 불연물류, 가연물류 등으로 선별하고, 토사류, 불연물류는 현장 재활용하고, 가연물류는 별도 처리하는 방안이 최적 방안으로 제시되었다. 가연물류는 소각하는 것이 일반적인데, 높은 소각비용으로 경제성을 확보하기 위하여 현장압축매립공정이 새로운 대안으로 평가받고 있다. 현장압축매립공정은 일반매립공정보다 좁은 면적에 매립이 가능하며, 소각공정에 비해 경제적인 장점을 가지고 있다.

• 농촌계획
• /
• 제16권2호
• /
• pp.31-45
• /
• 2010

Building a dam that is not considering the environmental impact and human social impact can cause the loss of entire ecospheres such as fragmentary green network, disturbance of plants ecosystem, the destruction of social and cultural indigenous resources, therefore, it can occur the environment change and distortion of ecosystem. The purpose of this study is that presenting the methods of ecosystem maintenance and ecosystem damage compensation about for environmentally direct impact i.e. the ecosystem change in the intended place for building a dam. According to the planning progress, the study was proceeded to planning site examine, assessment, conception plan. As the results of examine and assessment, it must be necessary to offered the maintenance and damage compensation if the site where include the 1st degree of biotope area, the 2nd degree of biotope and the 8th degree of green naturality area were damaged by being submerged and constructing road. In addition, according to the conception plan, we suggest the mitigation proposals such as plant communities transplant, planning of connecting green network against for influencing direct impact ecosystem that is destroying plant communities, damaging inhabitants, noise pollution, water pollution, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.273-275
• /
• 2005

The national need to establish a new stray current mitigation method to protect the underground metallic infrastructures in congested downtown area forced us to design and develop the distributed impressed current cathodic protection (DICCP) system. The main purpose of this system is to replace the stray current drainage bond methods, which is widely adopted by pipeline owners in Korea. Currently, forced drainage makes up about 85% of total drainage facilities installed in Korea because polarized drainage can neither drain perfectly the stray currents during normal operation of electric vehicle nor drain the reverse current during regenerative braking at all. The forced drainage, however, has been abused as an alternative cathodic protection system, which impresses currents from rails to the pipelines and accordingly uses the rails as anodes. As a result, it is necessary to consider a new method to both cathodically protect the pipelines and effectively drain the stray currents. In this paper, we describe the design parameters and installation schemes of DICCP system that can meet these demands.

• 한국방재학회 논문집
• /
• 제9권1호
• /
• pp.33-40
• /
• 2009

입상재료를 이용한 도로의 시공은 주로 다짐을 이용한다. 다짐으로 인한 효과는 흙의 강도증진, 압축변형감소, 투수계수감소등이 있다. 현재 사용하는 다짐은 주로 프록터 다짐기를 이용한 표준 및 수정다짐방법을 이용한다. 프록터 다짐기는 주로 충격에너지를 이용하여 다짐효과를 구현하는데, 이는 현장의 다짐기기에 의한 다짐조건과 상이하며, 최대건조밀도를 맞추는데 상당한 어려움이 있다. 이러한 문제를 해결하기 위하여 선회다짐기를 이용한 흙의 다짐평가를 시행하였다. 본 연구의 목적은 현장다짐장비의 조사, 실내다짐방법의 다짐특성 평가, 현장다짐특성을 평가하여, 선회다짐기를 이용한 새로운 다짐평가방법을 제시하고자 한다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1889-1900
• /
• 2018

Harmonic current mitigation is vital in power distribution networks owing to the inflow of nonlinear loads, distributed generation, and renewable energy sources. The active power filter (APF) is the current electrical equipment that can dynamically compensate for harmonic distortion and eliminate asymmetrical loads. The compensation performance of an APF largely depends on the control strategy applied to the voltage source inverter (VSI). Model predictive control (MPC) has been demonstrated to be one of the effective control approaches to providing fast dynamic responses. This approach covers different types of power converters due to its several advantages, such as flexible control scheme and simple inclusion of nonlinearities and constraints within the controller design. In this study, a finite control set-MPC technique is proposed for the control of VSIs. Unlike conventional control methods, the proposed technique uses a discrete time model of the shunt APF to predict the future behavior of harmonic currents and determine the cost function so as to optimize current errors through the selection of appropriate switching states. The viability of this strategy in terms of harmonic mitigation is verified in MATLAB/Simulink. Experimental results show that MPC performs well in terms of reduced total harmonic distortion and is effective in APFs.

• International Journal of Computer Science & Network Security
• /
• 제21권12spc호
• /
• pp.586-596
• /
• 2021

Software organisations follow different methodologies for the development of software. The software development methodologies are mainly divided into two categories, including plan-driven and agile development. To attain project success, it is very significant to consider risk management during whole project. Agile development is considered risk-driven, but many risks are unreported at the industrial level. The risks can be divided into three categories, including (i) development risks, (ii) organisations risks, and (iii) people-oriented risks. This paper deals with Development risks specifically. Several risks related to development are faced by people working in the industry while dealing with agile development. Their management among the industry is a big issue, so this paper emphasises ARMF based on development-related risks by following agile development. This research work will help software organisations to prevent different project-related risks during agile development. The risks are elicited at two-level, (i) literature-based and (ii) IT industry based. A systematic literature review was performed for eliciting the agile risks from the literature. Detailed case studies and survey research methods were applied for eliciting risks from IT industry. Finally, we merged the agile development risks from literature with standard industrial risks. Hence, we established an agile risk mitigation framework ARMF based on agile development and present a groundwork established in light of empirical examination for extending it in future research.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4382-4394
• /
• 2023

Passive auto-catalytic recombiners (PARs) are widely used to mitigate a hydrogen hazard. The first step to evaluate the hydrogen safety by PARs is to obtain qualified test data of the PARs for validation of their analytical model. SPARC PAR tests SP8 and SP9 were conducted to evaluate the hydrogen recombination characteristics of a honeycomb-shaped catalyst PAR. To obtain the hydrogen recombination rate from the PAR test data, two methods, Method-1 and Method-2, introduced by the THAI project, were applied. Since a large gradient of hydrogen concentration developed during hydrogen injection can cause a large error in the hydrogen mass obtained by integrating the measured hydrogen concentrations, a gate was installed at the PAR inlet to homogenize hydrogen in the test vessel before the PAR operation in the tests. A computational fluid dynamics (CFD) code with a PAR model was also applied to evaluate the characteristics of the PAR recombination according to the PAR inlet conditions, and the results were compared with those from Method-1 and Method-2. It was confirmed that the recombination rates from Method-1 require a correction factor to be compatible with results from Method-2 and the CFD simulation in the case of the SPARC-PAR tests.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.87-92
• /
• 2011

본 논문은 도시철도공사시 하저통과구간의 지반투수저하공법에 대한 연구결과이다. 본 연구에서는 하저지반의 투수저하공법들 중 특히 주입공법에 대하여 연구의 초점을 두었다. 하저지반에서 장 단기적으로 안전하게 지반수리거동을 도모하기 위한 주입공법의 설계기법에 대하여 제시하였다. 그래서 하저통과 터널공사시 안전시공과 완공 후 터널구조물의 장기적인 안전유지관리 측면에서 적용성이 양호하다고 판단되는 N.D.S (Natural Durable Stabilizer)공법과 S.M.I (Space-Multi-Injection Grouting)공법을 제시하였다. 이 두 공법의 실질적인 시공효과를 평가하기 위하여 ${\bigcirc}{\bigcirc}$지역에 건설예정인 하저통과 도시철도터널공사구간에서 시험시공을 실시하였다. 시험 시공기간 중에는 실내 및 현장에서 지반투수 특성시험을 실시하여 시공전후의 지반의 투수성 저하효과를 평가하였으며, 두 공법의 시험시공결과는 이론적인 배경과 함께 비교 분석하였다. 비교 분석결과, S.M.I공법의 경우 N.D.S공법보다 투수성 저하효과가 큰 것으로 나타났다. 즉, 주입공법에 있어서 시멘트 무기질계 재료보다는 비 알칼리성 실리카 졸계가 투수저하 효과를 더 크게 할 수 있을 것으로 판단되었다. 끝으로 본 연구결과로부터 특히 철도터널설계시 하저지반의 투수성 저하효과 증대를 위한 주입공법 설계 기술발전에 공헌 할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.680-688
• /
• 2008

On behalf of hazard mitigation, cases of investigation methods on levee are described. In general, failures of levee are caused by piping, water leakage through ground under the levee in Kimpo, Ilsan etc. Several phenomena against levees should be protected through consideration of analysis and quality control stage during construction. In this paper, protection methods against failures should be investigated by case studies.

• 환경영향평가
• /
• 제16권5호
• /
• pp.373-379
• /
• 2007

Natural hazards such as typhoon, flood, landslide affect both coastal and inland areas more often according to increasement of severe and unusual weather. To provide adequate coastal disaster mitigation strategies, coastal disaster prevention system using GIS is very useful. Application methods of digital map on this issue was discussed in this study. For developing of coastal disaster prevention system, the data structures related to disaster monitoring is needed to be revised for interdisciplinary framework. To improve the current coastal disaster mapping methods, GIS based new model for coastal disaster mapping was suggested. In this study, coastal GIS showed the attribute data and structures of coastal disaster mapping.