• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.589-592
• /
• 2005

Gravity characteristics and Moho undulations are investigated in the Korean peninsula by using satellite gravity data. According to the development of satellite geodesy, gravity potential models which have high accuracy and resolution were released. Using the EIGEN-CGOIC model based on low orbit satellite data such as CHAMP and GRACE, geoid and gravity anomaly were calculated by spherical harmonic analysis. The study area is located at $123^{\circ}\sim132^{\circ}E, 33^{\circ}\sim43^{\circ}$N including Korea. Free-air anomalies, which show the effect of terrain, have the values between $-37\sim724 mgal. After Bouguer correction, the range of simple Bouguer anomalies is $-221\sim246$ mgal. Complete Bouguer anomalies after terrain correction increase from continent to marine. This phenomenon is related rise of Moho discontinuity. The cut-frequency for extraction of Moho undulation was determined by power spectrum analysis, and then 3D inversion modeling was implemented. The mean, maximum, minimum, and standard deviation of Moho depth undulation are -26, -36, -8, and 4.9 krn, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• 제19권8호
• /
• pp.141-146
• /
• 2002

This paper has studied to obtain the grinding characteristics and optimal grinding conditions of ceramic materials in the grinding with diamond wheel by design of experiments. The load on wheel by varying the feed rate was related with the surface roughness due to the minute destruction phenomenon of grains for the $Si_3\;N_4\;and\;ZrO_2$. The depth of cut is related with the surface roughness because the grinding is carried out by grain shedding process due to the brittle fracture phenomenon for the $A1_2\;O_3$. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiments using design of experiments.

• Journal of the Korean Operations Research and Management Science Society
• /
• 제24권3호
• /
• pp.93-107
• /
• 1999

We consider the development of an integer programming model and algorithm for the ATM switching node location problem. There are two kinds of facilities, hub facilities and remote facilities, with different capacities and installation costs. Each customer needs to be connected to one or more hub facilities via remote facilities, where the hub(remote) facilities need to be installed at the same candidate installation site of hub(remote) facility. We are given a set of customers with each demand requirements, a set of candidate installation sites of facilities, and connection costs between facilities, We need to determine the locations to place facilities, the number of facilities for each selected location, the set of customers who are connected to each installed hub facilities via installed remote facilities with minimum costs, while satisfying demand requirements of each customer. We formulate this problem as a general integer programming problem and solve it to optimality. In this paper, we develop a branch-and-cut algorithm with path variables. In the algorithm, we consider the integer knapsack polytope and derive valid inequalities. Computational experiments show that the algorithm works well in the real world situation. The results of this research can be used to develop optimization algorithms to solve capacitated facility location problems.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제14권1호
• /
• pp.100-105
• /
• 2011

Generally, because received signals from radar are very bulky, the data are divided into manageable size called section, and sections are distributed into several digital signal processors. And then, target detection algorithms are applied simultaneously in each processor. CFAR(Constant False Alarm Rate) algorithm, which is the most popular target detection algorithm, can estimate accurate threshold values to determine which signals are targets or noises within center-cut of section allocated to each processor. However, its estimation precision is diminished in section edge data because of insufficient surrounding data to be referred. Especially this edge problem of CFAR is too serious if we have many sections to be processed, because it causes many false alarms in most every section edges. This paper describes false alarm issues on MCA(Minimum Cell Average)-CFAR, and proposes a false alarm elimination method by changing section size alternatively. Real received data from multi-function radar were used to evaluate a proposed method, and we show that our method drastically decreases false alarms without missing real targets, and improves detection performance.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권4호
• /
• pp.331-336
• /
• 1995

To use cultured mucosa as a graft of full thickness, our laboratory has been involved in the development of techniques to grow epidermis together with connective tissue. Human oral mucosa was obtained at dental surgery. Under sterile conditions the tissues were cut into explants of 0.1 $cm^2$ which were placed in the center of 24 well tissue culture dishes and incubated in a growth medium. The growth medium used for epithelial was MEM(Minimum Essential Medium) supplemented with 10% fetal calf serum, 0.5% dimethyl sulfoxide, glutamine (0.292 g/l), epidermal growth factor (40 ug/ml), cholera toxin (30 ng/ml), hydrocortisone (2 ug/ml), insulin (40 ug/ml) and transferin (5 ug/ml). The medium for stratification of epithelial cells was MEM supplemented with 10% fetal calf serum, 0.5% dimethyl sulfoxide and glutamine (0.292 g/l). The medium used for fibroblasts was MEM supplemented with 10% fetal calf serum. With the three types of media used alternatively, a mucosa composed of epidermis and connective tissue was obtained after 3 weeks of culture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제42권2호
• /
• pp.9-14
• /
• 2005

This paper reports the hot carrier induced RF performance degradation of bulk dynamic threshold voltage MOSFET (B-DTMOS) compared with bulk MOSFET (B-MOS). In the normal and moderate mode operations, the degradations of cut-off frequency $(f_{T})$ and minimum noise figure $(F_{min})$ of B-DTMOS are less significant than those of B-MOS devices. Our experimental results show that the RF performance degradation is more significant than the U performance degradation after hot carrier stressing. Also, the degradation characteristics of RF power Performance of B-DTMOS due to hot carrier effects are measured for the first time.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.955-958
• /
• 2002

A workflow is a flow of work supported by computers. An instance of a workflow is called case. Companies need to constantly refine their current workflows in order to meet various requirements. The change of current workflows is called dynamic change of the workflow. Since Ellis et al. proposed three change types, Flush, Abort, and Synthetic Cut-Over in 1995, various change types have been proposed. A promising change type is Migrate proposed by Sadiq et al., because Migrate changes workflow definitions immediately and makes the redo of cases minimum. However, the formal modeling and time-dependent analysis of Migrate has not been done. This paper proposes a method of computing change time of Migrate dynamic changes for time-dependent analysis. Change time is a measure for evaluating dynamic changes. We first show a Petri-nets-based model of Migrate dynamic changes. Then we present a method of computing change time based on the net model. Finally, we apply the method to 270 examples, and show experimental results, and comparison with Ellis et al..'s three change types.

• Journal of the Korean Society of Costume
• /
• 제21권
• /
• pp.5-18
• /
• 1993

The purpose of this study is to identify the architectural construction of Balenciaga's works. He was perfectionist in tailoring which was based on architectural thought, and couturier who could design, cut, sew and fit a whole gar-ment. Balenciaga has never followed any fashion trend but his own. He designed from within himself, according to his own sensitivity to fashion. Like Chanel, he mad clothes in which women can be comfortable, move in, and get on and off with a minimum of effort. He ap-plied radical shapes to flattering ends, for his clothes echoed movements and gestures, never determined them. He achieved the perfect harmony between the body and the garment, freeing the spirit of the woman within. Reflec-tion his respect for women, Balenciaga never contorted or restriced their bodies. He did not depend on hoops and petticoats to hold out the skirts of his evening dresses but on well-balanced, architectural construction. Therefore in order to identify the architec-tural consturuction, this study hypothesizes (1) the effect of mass and volume, (2) the ef-fect of weight and support, (3) the effect of complexity and simplicity, (4) the effect of line and rhythm etc. The architectural beauty of form in Balenciaga's works are especially based on simplicity and support.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제18권2호
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제12권1호
• /
• pp.109-116
• /
• 2008

In order to test the adhesive capacity of carbon fiber sheet, a static loading method for bending-behavior-type beam specimens, cut in half was developed and test was conducted with compressive strength of concrete set as the test parameter. The tests were performed to prescribe adhesive shear strength based upon the result of shear failure as well as verification of testing method. First of all, the test method proved to be reliable in determining the adhesive shear strength. The test result also exhibited two types of variations in adhesive shear strength. Among two types of variations, average and minimum values for adhesive shear strength, relatively stable results, 3.41MPa and 2.11MPa, respectively. Particularity in the adhesive shear strength with respect to compressive shear strength was not found.