Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Optimal Grinding Condition of Ceramics using the Design of Experiments

실험 계획법을 이용한 세라믹 재료의 최적 연삭 조건에 관한 연구

  • Published : 2002.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper has studied to obtain the grinding characteristics and optimal grinding conditions of ceramic materials in the grinding with diamond wheel by design of experiments. The load on wheel by varying the feed rate was related with the surface roughness due to the minute destruction phenomenon of grains for the $Si_3\;N_4\;and\;ZrO_2$. The depth of cut is related with the surface roughness because the grinding is carried out by grain shedding process due to the brittle fracture phenomenon for the $A1_2\;O_3$. The major factors affecting the surface roughness and the optimum grinding conditions were obtained with minimum experiments using design of experiments.

Keywords

References

  1. 유재상 외, '세라믹스 형상가공,' 요업기술, Vol. 11, No. 2, pp. 73-82, 1996
  2. 杉田忠彰, 'セラミックスの機械加工,' 養賢堂, pp. 33-34, 1985
  3. 하상백 외, '구조용 세라믹스의 연삭특성에 관한 연구,' 한국정밀공학회지, Vol. 16, No. 10, pp. 182-186, 1999
  4. 中川平三郞, 'グラインディングセンタによるセラミツクスの正面硏削加工,' 機械技術, 第40卷, 第4號, pp. 77-83, 1992
  5. 박성현, '현대 실험 계획법,' 민영사, pp. 16-18 , 2001