• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.834-839
• /
• 2007

The superimposed text in video brings important semantic clues into content analysis. In this paper, we present the new and fast superimposed text localization method in video segments. We detect the superimposed text by using temporal information contained in the video. To detect the superimposed text fast, we have minimized the candidate region of localizing superimposed texts by using the difference between consecutive frames. Experimental results are presented to demonstrate the good performance of the new superimposed text localization algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.303-306
• /
• 1996

We propose a robust tuning method of the quadratic criterion based iterative learning control(Q-ILC) algorithm for discrete-time linear batch system. First, we establish the frequency domain representation for batch systems. Next, a robust convergence condition is derived in the frequency domain. Based on this condition, we propose to optimize the weighting matrices such that the upper bound of the robustness measure is minimized. Through numerical simulation, it is shown that the designed learning filter restores robustness under significant model uncertainty.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1169-1172
• /
• 1998

We designed an ALU(Airthmetic Logic Unit) with BIST(Built-In Self Test), which is suitable for 32-bit DSP RISC processors. We minimized the area of this ALU by allowing different operations to share several hardware blocks. Moreover, we applied DFT(Design for Testability) to ALU and offered Bist(Built-In Self-Test) function. BIST is composed of pattern generation and response analysis. We used the reseeding method and testability design for the high fault coverage. These techniques reduce the test length. Chip's reliability is improved by testing and the cost of testing system can be reduced.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.486_487
• /
• 2009

This paper presents a method for optimal operation to improve reliability of MicroGrid systems considering load types and interruption cost. The objective functions such as power losses cost, operation cost of dispersed generations, power purchasing cost, and interruption cost are minimized for reliability improvement and efficient operation. The several indices for reliability evaluation are improved by renewable energy sources installation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.1
• /
• pp.69-76
• /
• 1989

This paper presents a method of the optimum design for rotating shaft of centrifugal pump. That is, the object is to optimize the system in stability at the operating speed, unbalance response in the vicinity of the rotor critical speed, leakage flow of the seals. The objective function is composed of these three elements and is minimized by changing seal cleareance, diamoters, and lengths. A typical double suction centrifugal pump is analyzed and its objective function is presented. Then the optimum dimensions of seals are obtained, and vibration characteristics at both initial and optimum conditions are investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.892-895
• /
• 1996

An unknown input observer is proposed that can be used in wheelbase preview control of commercial vehicles. The preview and state information, required to calculate actuator force, are reconstructed from the measurement variables such as heave and pitch acceleration. Gain matrix of observer is optimally selected so that influence of system and measurement noises on the estimation error can be minimized. Estimated preview information requires low pass filtering to eliminate high frequency components resulting from differentiation of noisy output signals. Effectiveness of the proposed method is demonstrated by numerical simulation of half car model.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.41-43
• /
• 1993

This paper is proposed a method that optimizes teeth shape of Linear induction motor for high efficiency and slot shape for static end effect minimization in linear induction motor. As a result, unbalance current of each phase in minimized.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.731-732
• /
• 2008

Recently we are limiting use of toxic material of lead, mercury, cadmium, hexavalent chromium, PBB, etc. by a nation environment regulation guidance in Europe, the United States, China and Japan. In this paper, we developed manufacture method and RFID tag of environment material using Hanji, Broussonetia Kazinoki Siebold, and PLOYCABONATE, etc. The developed RFID tag stick to each layer interval using environment material which is minimized environment pollutant.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.3
• /
• pp.31-36
• /
• 2004

This paper will describe design process and its results that are minimized unaddressed feature of product development processes. This process provides integrated system design process by context analysis of EIA 632 standard process, interface definition from activity decomposition, integration of related activities, and definition of concurrency & sequential activities flow. This process and method application will contribute to minimize time loss that is emerged from activities iteration by not definitely definition of activities interface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.1027-1031
• /
• 2000

In this paper, multiphase dynamic optimization of machine structure is presented. The final goal is to obtain ( i ) light weight, and ( ii ) rigidity statically and dynamically. The entire optimization process is carried out in two steps. In the first step, multiple optimization problem with two objective functions is treated using Pareto genetic algorithm. Two objective functions are weight of the structure, and static compliance. In the second step, maximum receptance is minimized using genetic algorithm. The method is applied to a simplified milling machine.