• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.1-8
• /
• 2004

In this paper, we propose a method for restoring trademark and caption areas using an isophote. In our method, the image restoration problem is modeled as an optimization problem, which in our case, is solved by a cost function with isophote constraint that is minimized using a GA The technique creates an optimal connection of all pairs of isophotes disconnected by a caption in the frame. For connecting the disconnected isophotes, we estimate the value of the smoothness, given by the best chromosomes of the GA and project this value in the isophote direction. Experimental results show that the isophote operator worked better than Laplacian operator for image restoration, and the proposed method has a great possibility for automatic restoration of a region in an advertisement scene.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.13-18
• /
• 2003

In this paper, we researched on the improved method for transferring noise which is generated from power island. In general case, the power island has a drawback where the noise transfer increase because of the structural resonance in each power bus. Thus, this paper suggests two improved methods that reduces the noise transfer. First method is to suppress the structural resonance by varying the source of the noise. The second method is to utilize the EGI in order to minimize the EGI in order to minimize the transfer of the noise when the resonance occurs. The simulation analysis shows that the relocation of the noise source dramatically minimized the resonance in power bus and the utilization of EGI has effectively reduced the noise transfer.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.297-307
• /
• 1999

A character recognition system, where a large amount of character images arrive continuously in real time, must preprocess character images very quickly. Moreover, information loss due to image trans-formations such as geometric normalization and thinning needs to be minimized especially when character images are small and noisy. Therefore, we suggest a prompt and effective feature extraction method without transforming original images. For this, boundary pixels are defined in terms of the degree in classification, and those boundary pixels are considered selectively in extracting features. The proposed method is tested by a handwritten character recognition and a car plate number recognition. The experiments show that the proposed method is effective in recognition compared to conventional methods. And an overall reduction of execution time is achieved by completing all the required processing by a single image scan.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1881-1888
• /
• 2011

Red tide is a natural phenomenon to bloom harmful algal, which fish and shellfish die en masse. Red tide damage with respect to sea farming has been occurred each year. Red tide damage can be minimized by means of prediction of red tide blooms. Red tide prediction using naive bayes classifier can be achieve good prediction results. The result of naive bayes method only determine red tide blooms, whereas the method can not know how increasing of red tide algae density. In this paper, we proposed the red tide blooms prediction method using fuzzy reasoning and naive bayes classifier. The proposed method can enhance the precision of red tide prediction and forecast the increasing density of red tide algae.

• Computers and Concrete
• /
• v.18 no.5
• /
• pp.983-998
• /
• 2016

Structural optimization is one of the most important topics in structural engineering and has a wide range of applicability. Therefore, the main objective of the present study is to apply the Lagrange Multiplier Method (LMM) for minimum cost design of singly and doubly reinforced rectangular concrete beams. Concrete and steel material costs are used as objective cost function to be minimized in this study, and ultimate flexural strength of the beam is considered to be as the main constraint. The ultimate limit state method with partial material strength factors and equivalent concrete stress block is used to derive general relations for flexural strength of RC beam and empirical coefficients are taken from topic 9 of the Iranian National Building Regulation (INBR9). Optimum designs are obtained by using the LMM and are presented in closed form solutions. Graphical representation of solutions are presented and it is shown that proposed design curves can be used for minimum cost design of the beams without prior knowledge of optimization and without the need for iterative trials. The applicability of the proposed relations and curves are demonstrated through two real life examples of SRB and DRB design situations and it is shown that the minimum cost design is actually reached using proposed method.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.443-448
• /
• 2003

Approximate k-nearest neighbor queries are frequently occurred for finding the k nearest neighbors to a given query point in spatial database systems. The number of searched nodes in an index must be minimized in order to increase the performance of approximate k nearest neighbor queries. In this paper. we suggest the technique of approximate k nearest neighbor queries on R-tree family by improving the existing algorithm and evaluate the performance of the proposed method in dynamic spatial database environments. The simulation results show that a proposed method always has a low number of disk access irrespective of object distribution, size of nearest neighbor queries and approximation rates as compared with an existing method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.2
• /
• pp.99-107
• /
• 2003

This paper proposes a design for testability (DFT) and testability analysis method for register-transfer level (RTL) circuits. The proposed method executes testability analysis - controllability and observability - on the RTL circuit and determines the insertion points to enhance the testability. Then with the associated priority based on the testability, we insert only a few of the test multiplexers resulting in minimized area overhead. Experimental results shows a higher fault coverage and a shorter test generation time than the scan method. Also, the proposed method takes a shorter test application time required.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.2
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.743-750
• /
• 2003

The equivalent source method(ESM) is used for the calculation of the internal pressure field for an enclosure which can have arbitrary boundary conditions and nay include internal objects which scatter the sound field. The advantage of using ESM is that it requires relatively low computing cost and is easy to model the internal diffracting objects. Typical ESM modeling uses two groups of equivalent source positions. One group includes the first order images of the source inside the enclosure. The Positions of the other group are usually on a spherical surface some distance outside the enclosure. The normal velocity on the surfaces of the enclosure walls is evaluated at a larger number of positions than there are equivalent sources. The sum of the squared difference between this velocity and the expected is minimized by adjusting the strength of the equivalent sources. This study is on the optimal far field sources positions when using the equivalent source method. In general, the far field sources are evenly distributed on a surface of a virtual sphere which is centered at the enclosure with a sufficiently large radius. In this study. optimal far field source locations are searched using simulated annealing method for various radii of spheres where far field sources are located. Simulation results showed that optimally located sources with adequate distance away from the enclosure center gave better result than sources with even distribution even with a smaller number of far field sources.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.8
• /
• pp.815-823
• /
• 2013

The hot curvature forming of large aluminum plates is a process used to produce spherical liquefied natural gas (LNG) tanks. In this study, we describe a method to determine the optimum shape of blanks to minimize the root gap in the forming process. The method proposed in this study was applied to a small-scale model for thick plates with a curvature of 1500 mm and thickness of 6 mm. First, the shape of the curved shells was determined as the target shape, and then a coordinate transform was used to determine the optimum blank shape, which was then iteratively modified using the results of finite element method (FEM) simulations, including heat transfer, until the shape error was minimized. Experiments in forming using Al5083 thick plate were carried out, showing that the method can determine the optimum blank shape within an allowable root gap of 0.1 mm.