DOI QR코드

DOI QR Code

Development of optimum design curves for reinforced concrete beams based on the INBR9

  • Habibi, Alireza (Department of Civil Engineering, University of Kurdistan) ;
  • Ghawami, Fouad (Department of Civil Engineering, University of Kurdistan) ;
  • Shahidzadeh, Mohammad S. (Department of Civil Engineering, University of Kurdistan)
  • Received : 2016.02.16
  • Accepted : 2016.07.21
  • Published : 2016.11.25

Abstract

Structural optimization is one of the most important topics in structural engineering and has a wide range of applicability. Therefore, the main objective of the present study is to apply the Lagrange Multiplier Method (LMM) for minimum cost design of singly and doubly reinforced rectangular concrete beams. Concrete and steel material costs are used as objective cost function to be minimized in this study, and ultimate flexural strength of the beam is considered to be as the main constraint. The ultimate limit state method with partial material strength factors and equivalent concrete stress block is used to derive general relations for flexural strength of RC beam and empirical coefficients are taken from topic 9 of the Iranian National Building Regulation (INBR9). Optimum designs are obtained by using the LMM and are presented in closed form solutions. Graphical representation of solutions are presented and it is shown that proposed design curves can be used for minimum cost design of the beams without prior knowledge of optimization and without the need for iterative trials. The applicability of the proposed relations and curves are demonstrated through two real life examples of SRB and DRB design situations and it is shown that the minimum cost design is actually reached using proposed method.

Keywords

References

  1. Adamu, A. and Karihaloo, B.L. (1994), "Minimum cost design of RC beams using DCOC Part 2: beams with uniform cross-sections", Struct. Optim., 7(4), 252-259. https://doi.org/10.1007/BF01743720
  2. Adamu, A.; Karihaloo, B.L. and Rozvany, G.I.N. (1994), "Minimum cost design of reinforced concrete beams using continuum-type optimality criteria", Struct.Optim., 7(1), 91-102. https://doi.org/10.1007/BF01742512
  3. Al-Salloum, Y.A. and Siddiqi, G.H. (1994), "Cost-optimum design of reinforced concrete beams", ACI Struct. J., 91(6), 647-655.
  4. Arora, J.S., Elwakeil, O.A., Chahande, A.I. and Hsieh; C.C. (1994), "Global optimization methods for engineering applications : A review", Struct. Optim., 9(3), 137-159. artificial bee colony algorithm", Comput. Concrete, 10(3), 295-306.
  5. Atabay, S. (2009), "Cost optimization of three-dimensional beamless reinforced concrete shear-wall systems via genetic algorithm", Exp. Syst. Appl., 36(2), 3555-3561. https://doi.org/10.1016/j.eswa.2008.02.004
  6. Bordignon, R. and Kripka, M. (2012), "Optimum design of reinforced concrete columns subjected to uniaxial flexural compression", Comput. Concrete, 9(5), 327-340. https://doi.org/10.12989/cac.2012.9.5.327
  7. Ceranic, B. and Fryer, C. (2000), "Sensitivity analysis and optimum design curves for the minimum cost design of singly and doubly reinforced concrete beams", Struct. Multidisc. Optim., 20(4), 260-268. https://doi.org/10.1007/s001580050156
  8. Chakrabarty, B.K. (1992a), "A model for optimal design of reinforced concrete beams", J. Struct. Eng., 118(11), 3238-3242. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3238)
  9. Chakrabarty, B.K. (1992b), "Models for optimal design of reinforced concrete beams", Comput. Struct., 42(3), 447-451. https://doi.org/10.1016/0045-7949(92)90040-7
  10. Fedghouche, F. and Tiliouine, B. (2010), "Minimum cost design of RC Rectangular sections in bending under ultimate loads", Proceedings of the 5th International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2010 Hammamat, Tunisia, December.
  11. Fedghouche, F. and Tiliouine, B. (2012), "Minimum cost design of reinforced concrete T-beams at ultimate loads using Eurocode2", Eng. Struct., 42(2012), 43-50. https://doi.org/10.1016/j.engstruct.2012.04.008
  12. Kao, C.H. and Yeh, I.C. (2014), "Optimal design of reinforced concrete plane frames using artificial neural networks", Comput. Concrete, 14(4), 445-462. https://doi.org/10.12989/cac.2014.14.4.445
  13. Karihaloo, B.L. and Kanagasundaram, S. (1993), "Minimum cost design of reinforced concrete members by nonlinear programming", Optim. Large Struct. Syst., 231, 927-949.
  14. Medeiros, G.F. and Kripka, M. (2013), "Structural optimization and proposition of pre-sizing parameters for beams in reinforced concrete buildings", Comput. Concrete, 11(3), 253-270. https://doi.org/10.12989/cac.2013.11.3.253
  15. Mukherjee, A. and Deshpande, J.M. (1995a), "Applications of artificial neural networks in structural design expert systems", Comput. Struct., 54(3), 367-375. https://doi.org/10.1016/0045-7949(94)00342-Z
  16. Mukherjee, A. and Deshpande, J.M. (1995b), "Modeling initial design process using artificial neural networks", J. Comput. Civ. Eng., 9(3), 194-200. https://doi.org/10.1061/(ASCE)0887-3801(1995)9:3(194)
  17. Ozbay, E., Oztas, A. and Baykasoglu, A. (2010), "Cost optimization of high strength concretes by soft computing techniques", Comput. Concrete, 7(3), 221-237. https://doi.org/10.12989/cac.2010.7.3.221
  18. Ozturk, H.T., Durmus, Ay. and Durmus, Ah. (2012), "Optimum design of a reinforced concrete beam using
  19. Ozturk, H.T., Turkeli, E. and Durmus, A. (2016), "Optimum design of RC shallow tunnels in earthquake zones using artificial bee colony and genetic algorithms", Comput. Concrete, 17(4), 435-453. https://doi.org/10.12989/cac.2016.17.4.435
  20. Rahmanian, I., Lucet, Y. and Tesfamariam, S. (2014), "Optimal design of reinforced concrete beams: A review", Comput. Concrete, 13(4), 457-482. https://doi.org/10.12989/cac.2014.13.4.457
  21. Saini, B., Sehgal, V.K. and Gambhir, M.L. (2007), "Least-cost design of singly and doubly reinforced concrete beam using genetic algorithm optimized artificial neural network based on Levenberg-Marquardt and quasi-Newton backpropagation learning techniques", Struct. Multidisc. Optim., 34(3), 243-260 https://doi.org/10.1007/s00158-006-0081-3
  22. Saini, B., Sehgal, V.K. and Gambir, M.L. (2006), "Genetically optimized artificial neural network based optimum design of singly and doubly reinforced concrete beams", Asian J. Civil Eng., (Building and Housing), 7(6), 603-619.

Cited by

  1. Minimum cost design of RCMRFs based on consistent approximation method vol.26, pp.1, 2020, https://doi.org/10.12989/cac.2020.26.1.001
  2. Optimal configuration of RC frames considering ultimate and serviceability limit state constraints vol.14, pp.2, 2021, https://doi.org/10.1590/s1983-41952021000200004