• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.123-129
• /
• 2015

In general, recent critical studies of five-axis machine have tended to center on the question of effective machining to realize complex shape parts. However, the hydrostatic bearing and journal bearing, both of which are involved in the complex process of dividing the processing of internal precision-shape machining, must be optimized. Although the angle head is designed to machine the internal shape as it approaches the inner diameter of the work piece, research on the angle head in five-axis machining has received only minimal attention in domestic industries. In this study, an angle head which is optimized for effective internal shape machining is developed. In pursuit of this purpose, 3D and 2D designs of the angle head for five-axis machining are devised. Reliability is secured through static performance tests and machining accuracy evaluations of the angle head in keeping with the machining accuracy standard of 0.2mm for hydrostatic bearings.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.377-384
• /
• 2005

The purpose of this research is to develop and evaluate a traffic engineering architecture that uses local state information. This architecture is applied to an Internet protocol radio access network (RAN) that uses multi-protocol label switching (MPLS) and differentiated services to support mobile hosts. We assume mobility support is provided by a protocol such as the hierarchical mobile Internet protocol. The traffic engineering architecture is router based-meaning that routers on the edges of the network make the decisions onto which paths to place admitted traffic. We propose an algorithm that supports the architecture and uses local network state in order to function. The goal of the architecture is to provide an inexpensive and fast method to reduce network congestion while increasing the quality of service (QoS) level when compared to traditional routing and traffic engineering techniques. We use a number of different mobility scenarios and a mix of different types of traffic to evaluate our architecture and algorithm. We use the network simulator ns-2 as the core of our simulation environment. Around this core we built a system of pre-simulation, during simulation, and post-processing software that enabled us to simulate our traffic engineering architecture with only very minimal changes to the core ns-2 software. Our simulation environment supports a number of different mobility scenarios and a mix of different types of traffic to evaluate our architecture and algorithm.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.404-410
• /
• 2017

In order to help decision-makers in the early design phase to improve and make more cost-efficient system safety and reliability baselines of aircraft design concepts, a method (Multi-objective Optimization for Safety and Reliability Trade-off) that is able to handle trade-offs such as system safety, system reliability, and other characteristics, for instance weight and cost, is used. Multi-objective Optimization for Safety and Reliability Trade-off has been developed and implemented at SAAB Aeronautics. The aim of this paper is to demonstrate how the implemented method might work to aid the selection of optimal design alternatives. The method is a three-step method: step 1 involves the modelling of each considered target, step 2 is optimization, and step 3 is the visualization and selection of results (results processing). The analysis is performed within Architecture Design and Preliminary Design steps, according to the company's Product Development Process. The lessons learned regarding the use of the implemented trade-off method in the three cases are presented. The results are a handful of solutions, a basis to aid in the selection of a design alternative. While the implementation of the trade-off method is performed for companies, there is nothing to prevent adapting this method, with minimal modifications, for use in other industrial applications.

• Journal of the Korean Society of Costume
• /
• v.50 no.3
• /
• pp.117-131
• /
• 2000

The purpose of this study is for affirmation about fashion and film industry has very important relationship through the image of film fashion in 1990. To this processing , films in 1990 were analyzed by the back ground, time place, persons's status are expressed in period movie but the person's characters, development of story mood in contemporary movies. The contents of this study are as follows : First, film fashion which was related mass fashion design and concept development and fashion designers as constume services were considered. Second, the change of star image through the 20th century. The roles and new image of film fashion in period movies and contemporary movies in 1990 were searched. Third, proposal and results were confirmed for expansion of fashion industry and film industry together. Finally, from the latter of 20th century, a lot of fashion designers have participated in film works than before, So the images of films were sued and reflected as new mass trend . Especially retro-romantic mood was expressed in fashion trend due to period movie fashion. Also minimal city look and elegance glamourous look are represented cause of contemporary movie fashion. Therefore, the cooperation between film productions and fashion professionals is very important for promotion of Korean culture development in 21st century, 'the century of image'.

• Kyungpook Mathematical Journal
• /
• v.54 no.4
• /
• pp.619-627
• /
• 2014

Let $\mathcal{M}(S)$ denote the set of all $m{\times}n$ matrices over a semiring S. For $A{\in}\mathcal{M}(S)$, zero-term rank of A is the minimal number of lines (rows or columns) needed to cover all zero entries in A. In [5], the authors obtained that a linear operator on $\mathcal{M}(S)$ preserves zero-term rank if and only if it preserves zero-term ranks 0 and 1. In this paper, we obtain new characterizations of linear operators on $\mathcal{M}(S)$ that preserve zero-term rank. Consequently we obtain that a linear operator on $\mathcal{M}(S)$ preserves zero-term rank if and only if it preserves two consecutive zero-term ranks k and k + 1, where $0{\leq}k{\leq}min\{m,n\}-1$ if and only if it strongly preserves zero-term rank h, where $1{\leq}h{\leq}min\{m,n\}$.

• The KIPS Transactions:PartB
• /
• v.12B no.3 s.99
• /
• pp.313-322
• /
• 2005

In order to access digital items in a server via ubiquitous devices, the digital items should be adapted according to the system environment, device characteristics and user preferences. In ubiquitous environment, those device-dependent adaptation requirements are not statically determined and not predictable. Therefore an application specific adaptation mechanism can not be applied to a general digital item adaptation engine. In this paper, we propose an application independent digital item adaptation architecture which has a set of minimal transcoders, transcoding path generator for a required adaptation requirement, and adaptation scheduler. And a CFG based method of finding a sequence of multiple unit transcoders called a transcoding path Is described in detail followed by experimental results.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.377-381
• /
• 2006

A study was carried out to determine a suitable light intensity and inoculum size for the growth of Rhodopseudomonas palustris strain B1. The pollution reduction of sago effluent using free and immobilised R. palustris cells was also evaluated. The growth rate in glutamatemalate medium was highest at 4 klux compared to 2.5 and 3 klux. The optimal inoculum size was 10% (v/v). Both the COD and BOD of the sago effluent were reduced by 67% after three days of treatment. The difference in biomass production or BOD and COD removal with higher inoculum sizes of 15 and 20% was minimal. This could be attributed to limited nutrient availability in the substrate. The use of immobilised cells of R. palustris reduced the pollution load 10% less compared to pollution reduction by free cells. Hence, there was no significant difference in using free or immobilised cells for the treatment of sago effluent.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1145-1148
• /
• 2003

We show the mixed finite element method which induces solutions that has the same order of errors for both the gradient of the solution and the solution itself. The technique to construct an efficient reusable matrix is suggested. Two families of mixed finite element methods are introduced with an automatic generating technique for matrix with my order of basis. The generated matrix by this technique has more accurate values and is a sparse matrix. This new technique is applied to solve a minimal surface problem.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.33-40
• /
• 2016

Previous works for detecting arrhythmia have mostly used nonlinear method to increase classification accuracy. Most methods require accurate detection of ECG signal, higher computational cost and larger processing time. But it is difficult to analyze the ECG signal because of various noise types. Also in the healthcare system based IOT that must continuously monitor people's situation, it is necessary to process ECG signal in realtime. Therefore it is necessary to design efficient algorithm that classifies different arrhythmia in realtime and decreases computational cost by extrating minimal feature. In this paper, we propose R wave detection considering complexity and arrhythmia classification based on binary coding. For this purpose, we detected R wave through SOM and then RR interval from noise-free ECG signal through the preprocessing method. Also, we classified arrhythmia in realtime by converting threshold variability of feature to binary code. R wave detection and PVC, PAC, Normal classification is evaluated by using 39 record of MIT-BIH arrhythmia database. The achieved scores indicate the average of 99.41%, 97.18%, 94.14%, 99.83% in R wave, PVC, PAC, Normal.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.292-292
• /
• 2000

Since high-power CO$_2$ Laser can be make a high densed energy to Local processing area, manufacturing processes using the laser can be processed for very Localized areas at a very fast rate with minimal or no distortion. Accordingly, the laser has been widely used in the fields of thermal manufacturing processes such as welding, fusion cutting, grooving, and heat treatment of metals. In particular, interest in the laser heat treatment process has grown tremendously in the past few years. In this process, maintaining the uniform hardening depth is important problem to obtain good quality products and to reduce heat induced distortion and residual stress. For achieving this objective, we introduced a new design technique of a fuzzy logic controller that greatly simplified the design procedure by defining several simplified design parameters. In the design procedure, the major design parameters of the controller are characterized by identifying several common aspects. From a series of simulation results, we found that the proposed design technique can be effectively used to design of a fuzzy logic controller for the LASER surface hardening process.