• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1233-1238
• /
• 2003

본 논문에서는 마이크로스트립 패치 안테나의 소형화를 위해 방사 주름 원형 마이크로스트립 패치 안테나를 GPS 목적에 맞게 1.575 GHz를 중심으로 설계ㆍ제작하였다. 방사 주름 원형 패치 안테나는 평면형 패치를 3차원 방사 요철형 패치 구조로 제작함으로써, 패치 밑면에 흐르는 전류에 직각의 요철 경로를 갖게 하여 가시적인 공진 길이를 증가시켰으며, 그 결과 선형 편파인 경우 평면 원형 패치 안테나에 비하여 28 % 면적 단축율을 얻었으며, 원형 편파의 경우 27.7 %면적 단축율을 나타내었다. 이때 이득 2.1 dBd, 축비 1.3 dB, 2 dB 축비 대역폭 15 MHz(0.9 %)를 나타내어 소형화된 GPS용 수신안테나로써 적합한 특성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.765-766
• /
• 2006

Interior Permanent Magnet Synchronous Motor(IPMSM) have many advantages such as high power density, wide speed range and so on. With the IPMSM, miniaturization and energy efficient design can be achieved in comparison with Surface Permanent Magnet Synchronous Motor(SPMSM). In order to secure miniaturization and manufacturing efficiency of the motor, it has concentrated winding, because concentrated winding can reduce the motor volume and make manufacturing to be simple compared with the distributed winding. However, according to the pole-slot combinations motor parameters can be changed and unexpected normal force can be generated. Especially, unbalanced normal force in airgap can cause serious vibration and acoustic problem. Accordingly, in this paper, normal force and parameters variation of concentrated winding IPMSM are investigated according to the pole-slot combinations.

• 소성∙가공
• /
• 제13권3호
• /
• pp.211-215
• /
• 2004

Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. The alignment system of micro optical module is a key apparatus for the miniaturization of optical module and the development of optical communication parts with high functionality. In this research, we have developed a system capable of automatic alignment of a $30\mu\textrm{m}$-thick film filter and a lensed fiber in order to improve the speed and losses in the optical fiber-to-filter alignment of optical modules. Using the developed automatic alignment system and silicon optical bench, we have measured optical loss and characteristics of the assembled optical add/drop module before packaging $1{\times}1$ OADM optical module. Whole size of add/drop module was less than $5mm{\times}5mm{\times}1mm$. The measured maximum insertion loss was 0.294㏈ that is below 0.3㏈ which is a standard loss of optical module.

• 한국유체기계학회 논문집
• /
• 제15권5호
• /
• pp.32-36
• /
• 2012

The positive displacement pump and the regenerative pump are widely used in the range of low specific speed, $n_s{\leq}100$[rpm, m3/min, m]. The positive displacement pump is not suitable for miniaturization and operation in high rotational speed. The regenerative pump has a problem with large leakage flow and low efficiency. While the centrifugal pump has advantages of high efficiency, miniaturization and high rotational speed, efficiency drops sharply with decrease in specific speed. Therefore the purpose of this study is to design a new type of centrifugal pump that has advantages of centrifugal pumps in operation in low specific speed. The name of this new type of pump was called 'Pipe type centrifugal pump', since the flow path through the impeller is simple circular pipe. Due to the simple shape of impeller, the manufacturing process is simple and cost is low. There is strong jet flow at the outlet of the impeller. This jet induces flow path loss, meridional dynamic pressure loss and mixing loss. Large disk friction makes the efficiency be limitted in the range of low specific speed. Even though the loss and the low efficiency, 'Pipe type centrifugal pump' represents stable performance, affordable pressure ratio and efficiency better than that of other low specific speed pumps.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권4호
• /
• pp.248-254
• /
• 2013

The size and power consumption of digital circuits including the dimming circuit part will increase for high-performance solid state lighting (SSL) systems in the future. This study examined the low-power consumption of adiabatic dynamic CMOS logic (ADCL) due to the principles of adiabatic charging. Furthermore, the designed low-power ADCL digital pulse width modulation (PWM) was optimized for SSL dimming systems. For this purpose, an ADCL digital 3-bit PWM was optimized in two steps. In the first step, the architecture of the ADCL digital 3-bit PWM was miniaturized. In the second step, the clock cut-off circuit was designed and added to the ADCL PWM. As a result, compared to the original configuration, 60 transistors and 15 capacitors of ADCL digital 3-bit PWM were reduced for miniaturization. Moreover, the clock cut-off circuit, which controls wake-up and sleep mode of ADCL D-FFs, was designed. The power consumption of an optimized ADCL digital PWM for all bit patterns decreased by 54 %.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.773-774
• /
• 2016

본 논문에서는 감마선원 영상화를 위한 감마선 탐지장치에 적용할 차폐체의 경량, 소형화 연구를 수행하였다. 선행 연구를 통해 상용 감마선 영상화 장치의 차폐체와 유사한 차폐효율 및 성능을 나타내는 납 기반의 차폐체를 구현하였으며, 본 논문에서는 납 기반의 차폐체보다 경량화, 소형화를 위해 텅스텐기반의 차폐체를 설계하였다. 차폐체 설계를 위해서 MCNP 전산모사를 수행하였으며, 그 결과 17%의 경량화 및 51%의 체적을 줄이는 결과를 얻었다.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.47-52
• /
• 2008

좌우현 합성 선로 메타재질구조 쎌 형식인 UWB 대역통과여파기의 저지특성을 향상시키기 위해, 메타재질특성을 유지하면서도 소형화라는 설계목적에 적합한 저역통과여파기 개념을 제안한다. 따라서 대역통과여파기 자체는 파장의 0.25배보다 훨씬 작게 만들어지고, 이는 인터디지틀 결합기와 접지된 스텁으로 구성되며, 전후에 대칭형 소형 저역통과 블록을 가진다. 설계결과는, 예상대로, 관내파장의 1/8의 크기, 대역폭 100%, 1dB 이하의 삽입손실, 평탄한 군지연, 우수한 반사손실 특성을 보인다.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.260-263
• /
• 2017

다종의 CPU를 기반으로 ADC와 DC-DC 변환기를 포함하며 2M-byte의 SRAM이 내장된 SoC가 제안되었다. CPU 코어는 12-bit MENSA 코어, 32-bit Symmetric Multi-core 프로세서, 16-bit CDSP로 구성된다. 외부 SDRAM 메모리를 제거하기 위해 내부의 2M-byte SRAM을 설계하였으나 SRAM 블록들이 넓은 영역에 분포하여 기생 성분에 의해 속도가 저하되므로 SRAM을 작게 분할하여 레이아웃 하였다. 설계된 SoC는 55nm 공정으로 개발되었으며 속도는 200MHz이다.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2017

Recently, there has been a continuous researches on solders having sophisticated and improved performance due to demand for high-density and miniaturization of electronics, and development of solder for automotive electronics which can be used in harsh environment. When developing a new solder alloy, there is a wettability of solder on substrate for things to consider, and the wetting balance test is one of the methods for measuring that one. In this paper, the wetting balance test is introduced, and the calculus of the surface tension of solder and the contact angle between solder and substrate using wetting curve obtained is introduced too. In detail, the principle and test method of the wetting balance test, the introduction of the parameters with important meaning in the wetting curve, the method of calculating the contact angle as well as the surface tension of the solder using the shape of the solder meniscus.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.19-22
• /
• 2004

The resonant planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 500 kHz, was designed and manufactured by using the planar core with large effective area and the flat copper lead frames for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a resonant converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 12 and 2 respectively. The self inductance of 1st winding was 33.2 ${\mu}H$, very low leakage inductance of 1.27 ${\mu}H$, and the coupling factor of 0.98 were obtained at switching frequency of 300 kHz. The high efficiency of 88.21 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.