• Journal of Powder Materials
• /
• v.18 no.2
• /
• pp.188-195
• /
• 2011

The aim of this study was to investigate microstructures and mechanical properties of nano-sized Ti-35 wt.%Nb-7 wt.%Zr-10 wt.%CPP composite fabricated by high energy mechanical milling (HEMM) and pulse current activated sintering (PCAS). Grain growth of the mechanically milled powder was prevented by performing PCAS. The principal advantages of calcium phosphate materials include: similarity in composition to the bone mineral, bioactivity, osteoconductivity and ability to form a uniquely strong interface with bone. The hardness and wear resistance property of nano-sized Ti-35 wt.%Nb-7 wt.%Zr-10 wt.%CPP composites increased with increasing milling time because of decreased grain-size of sintered composites.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.363-369
• /
• 2003

In this study, cell cracker method as a non-collision method was evaluated for the possibility of new red ginseng grinding technique. The moisture contents were 3.16% for the powder pulverized by hammer mill (group A) and 6.30% for the powder produced by cell cracker (group B), and the difference between both groups was significant, The contents of other component such as ash, crude lipid, reducing sugar, total sugar, acidic polysaccharide, crude fiber and crude protein between both groups were not significant. There were no significant differences in phenolic compound, fatty acid, amino acid, free sugar, crude saponin and ginsenosid contents between both groups. And also the contents of mineral components were evaluated to determine the incorporation of red ginseng powder during grinding, and also the differences of those between both groups were not significant.

• Korean journal of food and cookery science
• /
• v.26 no.4
• /
• pp.406-412
• /
• 2010

This study was conducted to investigate the effects of saltwort on the quality characteristics of tofu. In addition, we examined the potential for commercialization of tofu containing saltwort. For this study, saltwort was added to tofu at 0%, 4%, 8%, 12%, 16% and 20% and quality and sensory tests were administered. Analyzing the mineral contents of saltwort juice, K was present in the greatest amount, followed by Mg, P, Ca, and F (in decreasing order). There were significant differences in yield rates and turbidity between the groups. Acidity was highest in the control group, and acidity and volume of tofu tended to decrease with an increase in saltwort powder. L value and a value decreased as the content of slaltwort powder increased, but b value increased with increasing saltwort powder concentration. Hardness, chewiness, and gumminess were rated higher in the control and the 4% supplement groups than the others groups. In the sensory evaluation, cross section and soybean flavor were the highest in the 4% saltwort supplement group, and the presence of an "off-flavor" increased with the content of saltwort powder. The saltiness score was highest in the 20% supplement group. The 4% and 8% supplement groups were favored in the "feel after swallowing" assessment. Softness was the lowest in the 20% supplement group, and the 4% supplement group had the highest overall acceptability. As demonstrated by these results, the addition of saltwort positively affected the overall sensory evaluation of tofu and supplementation with saltwort at 4% and 8% might be considered the most appropriate choices. In conclusion, saltwort tofu expected to increase the functionality of new products, particularly with respect to product variety and health improvement.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.6
• /
• pp.593-603
• /
• 2021

In this study, Korean Hallabong produced in Jeju Island and coffee were grafted to prepare coffee containing Hallabong extract and the nutritional components were analyzed. As the amount of Hallabong extract increased, the water content and total polyphenol content increased. However, the crude flour, crude protein, and total flavonoid content decreased significantly. The selenium content per 100 g was 91.28 mg in the 1% Hallabong group, and the iron content was 6.84 mg in the 3% Hallabong group. As the content of Hallabong extract in coffee increased, the L-value (brightness) and b-value (yellowness) increased, but the a-value (redness) showed a tendency to decrease. In the case of DPPH(2,2-Diphenyl-1-picrylhydrazyl) radical scavenging activity, the group containing 9% of Hallabong extract showed the highest value at 47.20 μmol/g of TEAC. In particular, the ABTS(2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonate)) and DPPH radical scavenging activity were significantly increased from coffee powder containing 6% or more of Hallabong extract(p<0.05). The caffeine content decreased as the amount of Hallabong extract added to coffee increased. Therefore, when making powder coffee with Hallabong extract added, it is recommended to set the content of Hallabong extract to 6%.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.2
• /
• pp.279-290
• /
• 2010

Sensory analysis and quality properties were performed on post-aged doenjang (fermented soybean pastes) in order to elucidate the contribution of citrus, green tea and cactus powder to their sensory evaluation. The doenjang added citrus fruits, green tea and cactus powder used a concentration of 0, 3 and 7% (w/w) at 4, 20, $30^{\circ}C$ respectively and analyzed the proximate composition, pH, salt, mineral and amino acid contents after 60 days. Moisture and protein changes during ripening did not show any significant difference. The pH showed lower in the doenjang added citrus and cactus powder than no added soybean paste. The glutamic acid content of doenjang added citrus fruits showed a little decreasing value although there were no differences between samples with various addition contents. Sensory evaluation of doenjang showed that there were no significant differences in preference in the case of added green tea and cactus powder; However, the flavor significantly increased doenjang added 3% citrus powder at $30^{\circ}C$. These results showed that the preference of doenjang containing 3% citrus powder was superior to green tea and cactus powder.

• Journal of Ginseng Research
• /
• v.33 no.4
• /
• pp.361-366
• /
• 2009

This research aims to develop a new drying technology using super-heated steam to reduce the time required for drying ginseng and to enhance its quality. The drying rate of ginseng powder treated with hot-air drying after drying with super-heated steam was about 40% faster than the drying rate of ginseng powder treated with hot-air drying. Minimal difference was found between hot-air drying and hot-air drying after drying with super-heated steam in the general composition of the ginseng powder, such as its crude lipid, crude protein, crude fiber, and ash. Moreover, no difference was found between hot-air drying and hot-air drying after drying with super-heated steam in terms of the ginseng powder's mineral and free sugar contents. The crude saponin contents was 5.43% in the ginseng treated with hot-air drying and 5.4% in the ginseng treated with hot-air drying after drying with super-heated steam. The ginseng powder that was treated with hot-air drying after drying with super-heated steam had a slightly higher redness compared to the ginseng powder that was treated with hot-air drying alone. The number of microorganisms of the ginseng powder treated with hotair drying after drying with super-heated steam showed a reduction of one log cycle in the total bacteria and two log cycles in the yeast molds compared to the ginseng powder treated with hot-air drying alone.

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.181-186
• /
• 2014

This study was conducted to that investigate the quality characteristics of wet-ground whole-grain buckwheat powder for the buckwheat husk. The particle size of buckwheat rice was 74.84 ${\mu}m$, which was approximately four to five times larger than wet-ground whole buckwheat by wet grinding. The particle size showed that there was no significant difference after 90 min on wet grinding. The total phenolics and total flavonoids contents of the whole buckwheat powder were higher than those of buckwheat rice, and they gradually increased wet grinding progressed. The rutin contents of the buckwheat increased after wet grinding and was 152.90 ppm at 90 min. There was no significant difference in the quercetin contents after wet grinding at different times. The mineral contents (Ca, K and Mg) of the whole buckwheat powder were greater than those of the buckwheat rice. Further, Zn and Mn were detected in the whole buckwheat powder. The total amino acid content of the whole buckwheat powder increased to 22.27 mg%, and the important glutamic acid increased from 14.58 to 30.45 mg%. These study results were based on 90 min wet-grinding time for whole-buckwheat-powder manufacture. Whole buckwheat powder manufactured through wet grinding can be used as an active ingredient of buckwheat husk.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.434-441
• /
• 2011

In this study, certain quality characteristics of kimbugak samples prepared with 2 different puffing methods, microwave oven and frying, and containing different levels of sea tangle powder(0, 2, 4, and 6%), were examined according to mineral content, moisture content, color values, photographic images, hardness and sensory evaluations. The mineral contents of Porphyra yezoensis were: K, 2,612.400 mg; Ca, 116.970 mg; Na, 486.099 mg; Mg, 297.800 mg; Fe, 9.636 mg; Mn, 1.614 mg; and Cu, 0.973 mg. And those of the sea tangle powder were: K, 5,115.000 mg; Na, 1,848.931 mg; Ca, 763.030 mg; Mg, 525.700 mg; Fe, 15.125 mg; Zn, 4.639 mg; and Mn, 0.146 mg. Moisture content was not significantly different among the samples of kimbugak puffed by the microwave oven and frying. For the color of the kimbugak made with the microwave oven or frying, L values decreased as the level of sea tangle powder increased. Color a and b values were lowest in the control group. The color values(L, a, and b) of the kimbugak puffed by frying were higher than those made using the microwave oven. The hardness of the kimbugak samples puffed using the microwave oven were not significantly different according to levels of sea tangle powder, and in the kimbugak puffed by frying, the lowest hardness was in the sample with 6% sea tangle. In sensory evaluations, color and crispness were not significantly different among the samples. The flavor scores of the 4% and 6% samples puffed by frying were higher than those of the kimbugak samples puffed using the microwave oven. The overall acceptability of the kimbugak puffed by frying and containing 6% sea tangle powder was the highest. In conclusion, 4 and 6% sea tangle powder would be considered optimum amounts for kimbugak puffed by frying.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.40-47
• /
• 2014

Feasibility of utilizing unburned carbon residue in coal ash as a potential precursor for the production of activated carbon was assessed to seek for solution to recycle unburned carbon residue. The unburned carbon concentrate generated from the 4 stages of cleaner flotation has a grade of 87% carbon. The crystalline impurities in the concentrate included quartz and mullite. Unburned carbon had a low specific surface area of $10m^2/g$, which might be related to a high degree of coalification of domestic anthracite coal. Carbon particles were mostly porous and have a turbostratic structure. When 1g of carbon was activated with 6g of KOH powder, the highest specific surface area value of $670m^2/g$ was achieved. Low wettability of unburned carbon particles, which was resulted from high temperature combustion in a boiler, might cause poor pore formation when they were activated by KOH solution. The activated carbon produced in this study developed micropores, with an equivalent quality of general-purpose activated carbon made from coal. Hence, it is concluded that chemically treated unburned carbon can be used for water purification or an alternative to carbon black as it is.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.27-34
• /
• 2013

X-ray powder diffraction is one of the most powerful techniques for qualitative and quantitative analysis of crystalline compounds. Thus, there exist a number of different methods for quantifying mineral mixtures using X-ray diffraction pattern. We present here the use of Rietveld and PONKCS (partial or no known crystal structure) methods for quantification of amorphous and crystallized mineral phases in synthetic mixtures of standard minerals (amorphous silica, quartz, mullite and corundum). Pawley phase model of amorphous silica was successfully built from the pattern of 100 wt% amorphous silica and internal standard-spiked samples by PONKCS approach. The average of absolute bias for quantities of amorphous silica was 1.85 wt%. The larger bias observed for lower quantities of amorphous silica is probably explained by low intensities of diffraction pattern. Averages of absolute bias for minerals were 0.53 wt% for quartz, 0.87 wt% for mullite and 0.57 wt% for corundum, respectively. The PONKCS approach achieved improved quantitative results compared with classical Rietveld method by using an internal standard.