• 제목/요약/키워드: min-sum

검색결과 487건 처리시간 0.031초

Comparison of Milling and Flour Quality Characteristics of Foreign Wheat and Korean Wheat

  • Jinhee Park;Kyeong-Hoon Kim;Chon-Sik Kang;Go Eun Lee;Kyeong-Min Kim;Mina Kim;Han-yong Jeong;Yurim Kim;Jiyoung Shon;Jong-Min Ko
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.296-296
    • /
    • 2022
  • This study was investigated to compare the milling and physicochemical characteristics of six Korean wheat cultivars (Keumkang, KK; Jokyung, JK; Goso, GS; Joongmo2008, JM; Baekkang, BK; Saekeumkang, SKK) and five foreign wheat classes (Australian standard white wheat, ASW; Australian hard, AH; US northern spring, NS; US hard red winter, HRW; Soft wheat, SW). Korea and foreign wheat grains were milled using a Buhler MLU-202. Flour moisture, ash, protein, gluten, sedimentation, particle size, solvent retention capacity (SRC) and dough properties of flour were analyzed. Results showed that the hard wheats had a greater total flour yield and reduction fraction yield than the soft wheats regardless of the country. However, there were in the milling characteristics between the US and Korean soft wheats. GS, a soft wheat in Korea, had the lowest flour yield (59.6%) and the highest bran fraction yield (21.4%). The particle sizes of flour by milling fraction were B1>B2>B3 for the largest, and the R1〈R2〈R3 for the smallest. Particle size, ash, protein contents and the values of lactic acid SRC showed highly correlated with flour yield. The gluten-performance-index (GPI) is the ratio of the lactic acid SRC value to the sum of sodium carbonate and sucrose SRC values, and it has been used as a quality indicator for overall performance potential of flour. GPI values differed depending on the wheat variety or class, JM (0.82) was the highest value, and SKK (0.56) and SW (0.59) were low. The curve pattern of the Mixolab result also gives a quality indication of the flour sample. JM and NS flour had similar pattern at water absorption and gluten strength parameters and BK and HRW had similar viscosity patterns. These results will enable further study for blending Korean wheat cultivar to improve the flour quality.

  • PDF

Hardware Approach to Fuzzy Inference―ASIC and RISC―

  • Watanabe, Hiroyuki
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.975-976
    • /
    • 1993
  • This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

  • PDF

일 대학병원 호스피스 병동 입원 환자의 간호활동시간 측정과 원가산정 (Determination of Cost and Measurement of nursing Care Hours for Hospice Patients Hospitalized in one University Hospital)

  • 김경운
    • 간호행정학회지
    • /
    • 제6권3호
    • /
    • pp.389-404
    • /
    • 2000
  • This study was designed to determine the cost and measurement of nursing care hours for hospice patients hostpitalized in one university hospital. 314 inpatients in the hospice unit 11 nursing manpower were enrolled. Study was taken place in C University Hospital from 8th to 28th, Nov, 1999. Researcher and investigator did pilot study for selecting compatible hospice patient classification indicators. After modifying patient classification indicators and nursing care details for general ward, approved of content validity by specialist. Using hospice patient classification indicators and per 5 min continuing observation method, researcher and investigator recorded direct nursing care hours, indirect nursing care hours, and personnel time on hospice nursing care hours, and personnel time on hospice nursing care activities sheet. All of the patients were classified into Class I(mildly ill), Class II (moderately ill), Class III (acutely ill), and Class IV (critically ill) by patient classification system (PCS) which had been carefully developed to be suitable for the Korean hospice ward. And then the elements of the nursing care cost was investigated. Based on the data from an accounting section (Riccolo, 1988), nursing care hours per patient per day in each class and nursing care cost per patient per hour were multiplied. And then the mean of the nursing care cost per patient per day in each class was calculated. Using SAS, The number of patients in class and nursing activities in duty for nursing care hours were calculated the percent, the mean, the standard deviation respectively. According to the ANOVA and the $Scheff{\'{e}$ test, direct nursing care hours per patient per day for the each class were analyzed. The results of this study were summarized as follows : 1. Distribution of patient class : class IN(33.5%) was the largest class the rest were class II(26.1%) class III(22.6%), class I(17.8%). Nursing care requirements of the inpatients in hospice ward were greater than that of the inpatients in general ward. 2. Direct nursing care activities : Measurement ${\cdot}$ observation 41.7%, medication 16.6%, exercise ${\cdot}$ safety 12.5%, education ${\cdot}$ communication 7.2% etc. The mean hours of direct nursing care per patient per day per duty were needed ; 69.3 min for day duty, 64.7 min for evening duty, 88.2 min for night duty, 38.7 min for shift duty. The mean hours of direct nursing care of night duty was longer than that of the other duty. Direct nursing care hours per patient per day in each class were needed ; 3.1 hrs for class I, 3.9 hrs for class II, 4.7 hrs for class III, and 5.2 hrs for class IV. The mean hours of direct nursing care per patient per day without the PCS was 4.1 hours. The mean hours of direct nursing care per patient per day in class was increased significantly according to increasing nursing care requirements of the inpatients(F=49.04, p=.0001). The each class was significantly different(p<0.05). The mean hours of direct nursing care of several direct nursing care activities in each class were increased according to increasing nursing care requirements of the inpatients(p<0.05) ; class III and class IV for medication and education ${\cdot}$ communication, class I, class III and class IV for measurement ${\cdot}$ observation, class I, class II and class IV for elimination ${\cdot}$ irrigation, all of class for exercise ${\cdot}$ safety. 3. Indirect nursing care activities and personnel time : Recognization 24.2%, house keeping activity 22.7%, charting 17.2%, personnel time 11.8% etc. The mean hours of indirect nursing care and personnel time per nursing manpower was 4.7 hrs. The mean hours of indirect nursing care and personnel time per duty were 294.8 min for day duty, 212.3 min for evening duty, 387.9 min for night duty, 143.3 min for shift duty. The mean of indirect nursing care hours and personnel time of night duty was longer than that of the other duty. 4. The mean hours of indirect nursing care and personnel time per patient per day was 2.5 hrs. 5. The mean hours of nursing care per patient per day in each class were class I 5.6 hrs, class II 6.4 hrs, class III 7.2 hrs, class IV 7.7 hrs. 6. The elements of the nursing care cost were composed of 2,212 won for direct nursing care cost, 267 won for direct material cost and 307 won for indirect cost. Sum of the elements of the nursing care cost was 2,786 won. 7. The mean cost of the nursing care per patient per day in each class were 15,601.6 won for class I, 17,830.4 won for class II, 20,259.2 won for class III, 21,452.2 won for class IV. As above, using modified hospice patient classification indicators and nursing care activity details, many critical ill patients were hospitalized in the hospice unit and it reflected that the more nursing care requirements of the patients, the more direct nursing care hours. Emotional ${\cdot}$ spiritual care, pain ${\cdot}$ symptom control, terminal care, education ${\cdot}$ communication, narcotics management and delivery, attending funeral ceremony, the major nursing care activities, were also the independent hospice service. But it is not compensated by the present medical insurance system. Exercise ${\cdot}$ safety, elimination ${\cdot}$ irrigation needed more nursing care hours as equal to that of intensive care units. The present nursing management fee in the medical insurance system compensated only a part of nursing car service in hospice unit, which rewarded lower cost that that of nursing care.

  • PDF

일산화탄소 폐확산능검사에서 단회호흡법과 호흡내검사법의 비교 (Comparison of Single-Breath and Intra-Breath Method in Measuring Diffusing Capacity for Carbon Monoxide of the Lung)

  • 이재호;정희순;심영수
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권4호
    • /
    • pp.555-568
    • /
    • 1995
  • 연구배경: 폐확산능은 산소를 이용하여 측정하는 것이 가장 생리적이지만 폐모세혈의 산소분압측정이 어려워 임상에서는 일산화탄소를 이용하여 측정하고 있으며, 단회호흡(single-breath)폐확산능검사법이 가장 널리 사용되고있는 방법이다. 그러나 총폐용량까지 흡기한후 10초간 숨을 참는 과정을 기침, 호흡곤란 등이 있는 환자로선 수용하기 곤란하므로 이러한 과정없이 낮은 유량의 일회호기만을 필요로 히는 호흡내(intra-breath)폐확산능검사법이 고안되었다. 본 연구에서는 단회호흡법과 호흡내법으로 측정한 폐확산능간에 유의한 차이가 있는지 그리고 차이가 있다면 어떤 인자가 영향을 미치는지를 알아보고자 하였다. 방법: 특정질환과 무관하게 임의로 73명을 선택하고 유량-용적곡선 검사를 3회 시행한후 노력성 폐활량(FVC)과 1초간 노력성호기량($FEV_1$)의 합이 가장 큰 검사에서 노력성폐활량, 1초간 노력성호기량, 1초간 노력성호기량의 노력성 폐활량에 대한 비($FEV_1$/FVC)를 구했다. 폐확산능은 5분간격으로 각각 3회씩 단회호흡법과 호흡내법으로 측정하였으며, 선형적 상관분석으로 어떤 인자가 두 방법간의 폐확산능의 차[단회호흡법과 호흡내법에 의한 각각의 폐확산능의 차이의 평균치(mL/min/mmHg)]에 영향을 미치는지를 평가하여 다음과 같은 결과를 얻었다. 결과: 1) 단회호흡법 및 호흡내법 모두 검사내 재현성은 우수하였다. 2) 단회호흡법과 호흡내법으로 측정한 폐확산능간에는 전체적으로 유의한 상관관계가 있었지만, 두 방법의 측정치간에는 의미있는 치아가 있었다($1.01{\pm}0.35ml/min/mmHg$, p<0.01). 3) 단회호흡법과 호흡내법간의 폐확산능의 차이는 노력성폐활량과는 상관관계가 없었지만, 1초간 노력성호기량, $FEV_1$/FVC 및 환기배분의 지표인 메탄농도의 기울기와는 유의한 상관관계가 있었고 다중상관분석결과 $FEV_1$/FVC에 의한 영향이 가장 컸다(r=-0.4725, p<0.01). 4) 단회호흡법과 호흡내법간의 폐확산능의 차이와 $FEV_1$/FVC를 도식화하면 두 방법간의 폐확산능의 차이는 $FEV_1$/FVC가 50~60%인 구간에서 두 군으로 분리됨을 알수 있으며, $FEV_1$/FVC가 60% 이상에서는 두방법간에 유의한 차이가 없으나($0.05{\pm}0.24ml/min/mmHg$, p>0.1) 60% 미만에서는 유의한 차이가 있었다($-4.65{\pm}0.34ml/min/mmHg$, p<0.01). 5) 메탄농도의 기울기가 정상범위인 2%/L이내에선 단회호흡법과 호흡내법의 폐확산능이 모두 $24.3{\pm}0.68ml/min/mmHg$로 측정방법에 따른 차이가 없지만 2%/L를 초과한 경우에는 단회호흡법에 의한 폐확산능이 $15.0{\pm}0.44ml/min/mmHg$ 호흡내법에 선 $11.9{\pm}0.51ml/min/mmHg$로 두 방법간에 유의한 차이가 있었다(p<0.01). 따라서 $FEV_1$/FVC가 60% 미만일때는 호흡내법으로 측정한 폐확산능이 단회호흡법보다 의미있게 낮은 값을 보이는데, 그 이유는 주로 환기배분의 장애로 추정되지만 폐확산능 이 단회호흡법에서 과대평가되거나 폐확산능의 감소가 호흡내법에서 더 예민하게 나타 났을 가능정도 배제할수 없다. 결론: 73명을 대상으로 폐확산능을 단회호흡법과 호흡내법으로 측정해본 결과 호흡내법은 검사의 재현성도 우수하고 폐기능이 정상이거나 제한성 장애, 그리고 경도의 폐쇄성장애가 있는 경우에는 단회호흡법을 대체해서 사용할수 있지만, 중등도 이상의 폐쇄성장애가 있는 경우에는 단회호흡법보다 유의하게 낮은 검사치를 보였다. 호흡내법과 단회호흡법에 의한 폐확산능의 차이가 호흡내법이 단회호흡법에 비해 폐확산능의 감소를 예민하게 나타내주는 것인지 혹은 환기의 불균형에 의한 영향을 많이 받아서인지는 연구가 더 필요할 것이다.

  • PDF

영유아의 모유 섭취에 따른 폴리브롬화디페닐에테르의 위해성 평가 (Human Risk Assessment of Polybrominated Diphenyl Ethers by Breast Milk Feeding of Infants)

  • 위성욱;조봉희;조유진;윤조희;최시내;민병윤
    • 대한환경공학회지
    • /
    • 제34권2호
    • /
    • pp.109-118
    • /
    • 2012
  • 본 연구는 한국인 산모의 모유 중 PBDEs의 노출수준 및 위해성평가를 위해 서울지역에서 총 22개의 모유시료를 대상으로 분석되었다. PBDEs는 모든 대상 모유시료에서 검출되어, 이러한 화학물질이 서울지역에 거주하는 일반인에게 광범위하게 노출되었음을 시사한다. ${\Sigma}PBDEs$의 잔류수준은 0.84~13.1 ng/g lipid의 범위로 산술평균 농도는 3.56 ng/g lipid, 중앙값은 2.6 ng/g lipid이었다. 모유 중 ${\Sigma}PBDEs$ 농도 수준은 중국, 대만, 유럽국가(스위덴)와 유사하고 몇몇 아시아(베트남, 필리핀, 인도네시아)보다는 다소 높았다. 그러나 세계에서 PBDEs 소비가 가장 많은 북아메리카의 농도 수준보다는 10~100배 낮은 농도였다. 이성질체 기여율은 BDE-47이 가장 높았으며, 다음으로 BDE-153, BDE-100, BDE-99, BDE-28, BDE-183 그리고 BDE-154 순이었다. BDE-47과 BDE-153의 합은 대부분의 시료에서 ${\Sigma}PBDEs$의 약 65% 이상을 차지하였다. 영아의 모유 수유에 따른 ${\Sigma}PBDEs$ 위해성 평가 결과 영아의 모유 수유를 통한 6개월간 평균일일노출량은 16.5 ng/kg bw/day로 산출되었으며, BDE-47의 인체노출에 따른 위해도 지수(95th percentile)는 $1.2{\times}10^{-1}$로 예측되어 6개월간 모유 수유로 인한 영아의 건강유해영향은 나타나지 않을 것으로 평가되었다.

농촌지역 지하수의 오염 예측 방법 개선방안 연구: 충남 금산 지역에의 적용 (A Study of Improvement for the Prediction of Groundwater Pollution in Rural Area: Application in Keumsan, Korea)

  • 정범근;채기탁;고동찬;고경석;구민호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제13권4호
    • /
    • pp.40-53
    • /
    • 2008
  • 지하수의 오염 예측 기법의 개선을 위하여 미국 환경청(U.S. EPA)에서 개발된 지하수 오염 취약성 평가방법인 DRASTIC 모델(Aller et al., 1987), Panagopoulos et al.(2006)가 제안한 M-DRASTIC, Rupert(1999)가 제안한 LSDG 방법을 충남 금산 지역에 적용하였다. 충남 금산 지역은 농업을 비롯한 다양한 토지이용 특성과 아울러 다양한 지질, 지형, 토양 분포를 나타내어 지하수 오염예측 기법의 개선을 위한 연구에 최적의 조건을 갖추고 있다. DRASTIC 평가를 위하여 149개의 충적층 관정에 대한 수질 및 수리지질 조사가 수행되었으며, 지하수의 질산염 이온의 농도와 각 예측 방법으로부터 도출된 지수와의 상관관계 분석을 통하여 예측방법의 효용성을 평가하였다. EPA DRASTIC은 지하수 심도, 순 충진량, 대수층 매질, 토양 매질, 지형 경사, 비포화대 매질, 수리전도도 등 수리지질학적 인자들을 이용하여 지하수 오염 취약성을 상대적으로 평가하는 방법으로, 지하수의 잠재오염원에 대한 정보가 포함되지 않으므로 지하수 오염을 예측하는데 비효율적이다. 본 연구 결과, 관정 주변 150 m 영역의 DRASTIC 지수와 해당 관정의 질산염 이온 농도의 상관관계는 0.058로 낮게 나타났다. 한편, M-DRASTIC의 경우 DRASTIC과 사용하는 인자는 같으나 등급과 가중치를 실제 질산염 이온 농도의 비율로부터 산출한다. 등급만을 수정하였을 경우 0.245, 등급과 가중치를 모두 수정하였을 경우 질산염 이온 농도와의 상관관계는 0.400로 지하수 오염 예측율이 개선되었다. LSDG 방법은 토지이용(Land use), 토양 배수(Soil drainage), 지하수면 심도(Depth to water), 지질(Geology)를 특성에 따라서 구분하고 해당 지역의 질산염 이온 농도 평균의 차이를 통계적으로 분석하여 등급을 산정하는 기법으로, 금산 지역에 적용한 결과 질산염 이온 농도와의 상관관계가 0.415로 개선되었다. 결과적으로 LSDG를 적용하였을 경우 EPA DRASTIC 보다 질산염 이온 농도와의 상관관계가 0.357만큼 개선되었다. M-DRASTIC과 LSDG의 예측율이 증가하는 것은, 이 방법들의 등급과 가중치에는 현재의 오염현황이 반영되기 때문으로 질산염 이온 오염 가능성을 귀납적으로 예측하기 때문이다. LSDG의 예측율이 가장 높은 이유는 LSDG에는 잠재오염원으로 분류되는 토지이용이 포함되었기 때문인 것으로 판단된다.

기업형 슈퍼마켓(SSM)의 시장진입이 소매업태간 시장점유율 변화에 미친 영향 (The Impact of SSM Market Entry on Changes in Market Shares among Retailing Types)

  • 최지호;윤민석;문연희;최성호
    • 한국유통학회지:유통연구
    • /
    • 제17권3호
    • /
    • pp.115-132
    • /
    • 2012
  • 본 연구의 목적은 최근 급격하게 확산되고 있는 기업형 슈퍼마켓(SSM)의 시장 진입이 국내 소매업 경쟁구조에 미친 영향을 실증하는데 있다. 자료의 분석기간은 2000년 1월부터 2010년 12월까지이며, 기업형 슈퍼마켓이 월별로 진입한 점포수, 누적 점포수, 신규 SSM 사업체 중 $165m^2$ 미만 점포비율이 분석모형에 고려되어 소매업태별 상대적 시장점유율에 미치는 효과가 분석되었다. 한국표준산업분류 코드에서 종합소매업에 속해 있는 백화점, 대형마트, 슈퍼마켓, 체인화 편의점, 기타 음식료품 위주 종합 소매업으로 구분된 소매업태간 시장점유율은 매월 각 소매업태별 판매액을 합산하여 월별 총 소매판매액을 계산한 후, 각 소매업태의 판매액이 총 소매판매액에서 차지하는 비율로 측정하였다. 통제변수로 소매업태별 종사자 수, 통화량(M2)이 모형에 추가되어 분석되었다. 분석결과, 신규 SSM 시장진입으로 인한 소매업태별 시장점유율 변화는 대형마트에서만 통계적으로 유의한 결과가 도출되었다. SSM의 누적 점포수는 모든 소매업태의 시장점유율 변화에 유의한 영향을 미쳤으나 그 영향력에 대한 방향성이 소매업태별로 다르게 나타났다. 먼저 SSM의 확산은 대형마트와 편의점의 시장점유율을 감소시킨 반면에 백화점, 슈퍼마켓, 기타 음식료품 위주 종합 소매점의 시장점유율에는 긍정적인 공헌을 한 것으로 나타났다. 이러한 결과에 대한 논의, 시사점, 그리고 향후 연구 방향이 제시되었다.

  • PDF

부산수영하수처리장 하수와 음식물쓰레기 병합처리 시 공정별 악취특성 및 후처리시설 효율평가 (Removal Efficiency of the Deodorization Equipment and Characteristics of Malodor during the Process in Co-treatment of Sewage and Food Waste of Su-young Wastewater Treatment Plant in Busan)

  • 이형돈;강대종;이민호;강동효;오광중
    • 청정기술
    • /
    • 제18권4호
    • /
    • pp.379-389
    • /
    • 2012
  • 우리나라는 소득증가, 도시집중화, 인구증가로 인해 환경적인 문제에 대해 점점 관심이 증대되고 있으며, 이러한 다양한 환경문제 중 악취로 인한 피해는 심각한 환경문제 중 하나이다. 부산시 수영하수처리장 내 음식물처리장은 음식물과 하수를 병합처리하는 시설로 주거지역 인근에 위치해 있어 많은 민원이 제기되고 있는 실정이다. 이에 본 연구에서는 악취물질분석과 기여도를 악취지수(odor quotient, OQ)와 총악취지수(sum of odor quotient, SOQ)를 평가하여 분석하였으며, 또한 후처리시설인 바이오필터의 효율을 평가하였다. 공기희석관능법에 의한 복합악취 측정결과, 7월과 8월에 분쇄기, 투입호퍼, 침출수 순으로 복합악취가 높은 것으로 나타났다. 기기분석법을 이용해 분석한 결과, 황화수소, 암모니아, 메틸메르캅탄, 아세트알데히드에 의한 영향이 가장 큰 것으로 나타났고, 메틸메르캅탄의 경우, 최소감지농도를 3,571배 이상 초과한 것으로 나타났다. 또한 악취기여도평가에서 메틸메르캅탄(49.95~59.08%), 황화수소(20.43~29.27%), 트리메틸아민(8.82~13.42%), 아세트알데히드(9.17~11.35%)순으로 기여도가 높은 것으로 나타났다. 다른 시설과의 기여도를 비교분석한 결과, 황화합물(메틸메르캅탄, 황화수소)의 OQ가 가장 높았으며, 분쇄기에서 SOQ가 7,067로 가장 높은 것으로 분석되었다. 또한 황화합물과 아세트알데히드, 트리메틸아민의 악취기여도가 분쇄공정에서 가장 높은 것으로 나타났다. 본 연구시설의 후처리시설에 대한 처리효율을 평가한 결과, 암모니아, 아민류는 90.00% 이상의 처리효율을 보였으나, 황화합물류의 처리효율은 평균 53.51%로 나타났다. 종합적으로 본 시설은 기타 처리시설에 비해 아세트알데히드와 트리메틸아민의 기여도가 상대적으로 높은 것으로 나타났다. 또한 음식물처리장의 후처리시설은 복합적인 악취성분 처리 시 분해효율이 감소할 수 있어 적절한 용량 및 운전조건에 대한 검토가 필요하다.

유전형과 재배환경의 상호작용에 따른 감자 수량성과 글리코알카로이드 함량 변화 (Genotype x Environment Interaction and Stability Analysis for Potato Performance and Glycoalkaloid Content in Korea)

  • 김수정;손황배;이유영;박민우;장동칠;권오근;박영은;홍수영;서종택;남정환;정진철;구본철;김율호
    • 한국작물학회지
    • /
    • 제62권4호
    • /
    • pp.333-345
    • /
    • 2017
  • 감자 6품종인 수미(SP), 대서(AT), 하령(HR), 고운(GU), 홍영(HY), 자영(JY)을 대상으로, 해발고도별로 재배환경이 다른 강릉(E1), 진부(E2), 대관령(E3) 지역에서 2012년과 2013년 재배하여 괴경 수량성과 글리코알카로이드(PGA) 함량을 평가하였다. 품종이 가지고 있는 유전적 특성은 품종 고유의 유전형(G)과 재배환경(E)과의 상호작용($G{\times}E$)을 거쳐 발현되므로 본 연구에서는 AMMI 모델과 GGE biplot 분석을 통해 지역별 수량성과 PGA 함량 변화 양상을 검토하였다. 1. 감자 수량은 재배환경과 상호작용이 차지하는 비율이 높고, PGA 함량은 유전형(품종)의 효과가 차지하는 비율이 높은 것으로 나타났다. 2. 지역별로 높은 수량을 나타내는데 적합한 품종으로 강릉에서 '수미', 진부에서 '고운', 대관령 에서 '하령'이었으며, 수량이 높으면서 생산 안정성을 보인 품종은 수미였다. 3. 지역별로 높은 PGA 함량을 보이는 품종으로 강릉에서 '하령', 진부에서 '대서', 대관령에서 '수미'이었으며, PGA 함량이 낮으면서 재배환경에 영향을 덜 받는 안정성이 뛰어난 품종은 '고운'이었다. 4. 감자 품종의 양적 농업 형질인 수량은 재배환경에 따라 차이를 보였으며, PGA 함량은 품종 고유의 형질 차이에 의해 다르게 나타났다. 5. 감자의 수량성을 확보하기 위해서는 재배 적지의 선정이 중요하고, PGA 함량을 낮추기 위해서는 저함유 품종 개발이 선행되어야 한다고 판단되었다.

산욕기 산모의 산후 우울증에 영향을 미치는 요인 (A Study on the Factors related to postpartum Depression in Postpartum Women)

  • 최의순;오정아
    • 여성건강간호학회지
    • /
    • 제6권3호
    • /
    • pp.358-371
    • /
    • 2000
  • The purpose of this study was to provide the basic, data for developing a program for effective prevention for Postpartum Depression (PPD) by investigating the level of PPD in postpartum 2 weeks women. The subjects were 384 women who visited obstetrical clinics for postnatal care. The data were collected from June 29. 1999 to April. 2000, using a 46-item questionnaire related to PPD, and analyzed by SAS program for t-test, ANOVA, Scheffe test, stepwise multiple regressions. The results were as follows : 1. The level of PPD according to general characteristics Women had mild PPD (Min score; 46.0, Max score; 124.0). The PPD levels were significantly differences according to religion and marital satisfaction (p<0.05). 2. The level of PPD according to obstetrical characteristics 1) Characteristics related to pregnancy The PPD levels were significantly differences according to mood change, confidence of body weight recovery, depression related to appearance change, husband's help to housework, and husband's emotional support (p<0.05). 2) Stressful events during pregnancy The PPD levels were significantly differences according to financial problem, conflict between partners, conflict between family, and husband's job change (p<0.05). 3) Characteristics related to delivery and post natal period The PPD levels were significantly differences according to baby's health state, parenting confidence, and difficulties related to postpartum care (p<0.05). 3. The variables to predict postpartum depression in postpartum women are depression related to appearance change (10.4%), parenting confidence (8.8%), husband's help to housework (2.7%), confidence of body weight recovery (2.4%), husband's job change (1.9%), baby's health state (1.9%), difficulties related to postpartum care (1.6%), mood change (1.2%), conflict between partners (0.6%), marital satisfaction (0.5%), financial problem (0.4%). The sum total of all the above variables can account for 32.4% of postpartum depression. 4. The level of PPD according to PPD factors. Women had the highest degree of PPD in biophysiological phenomena-disturbance of physical functioning factor. The factors of relationship to baby-negative feeling and cognitive phenomena-self concept disturbance were showed the lowest degree of PPD. As a result of the above findings, a systemic and individualized program is strongly recommended for PPD prevention, diagnosis, and care for PPD in postpartum women. In near future, this study should be expanded to investigate the coping skills according to the PPD levels in postpartum women.

  • PDF