• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.253-263
• /
• 2007

Three different weather-resistant coatings were fabricated with the various weight ratios of a mill-base silicone/acrylic resin to let-down silicone /acrylic resin at 2:8, 3:7, and 4:6 respectively. The prepared coatings were tested to investigate the effect of composition of weather-resistant coatings on the physical properties. The thermal stability, salt spray exposure, and weather-resistance were improved with the increased silicone content. It was concluded that the optimum retio of mill-base silicone/acrylic resin to let-down silicone/acrylic resin would be 2:8 and the coating with 30 wt% of silicone content would have high weather-resistance.

• 대한환경공학회지
• /
• 제37권4호
• /
• pp.246-252
• /
• 2015

철강공장의 열연공정에서 발생하는 폐부산물인 mill scale을 원료로 하여 인흡착에 효율적인 무기흡착제인 magnetite를 생산하고자 하였다. Mill scale의 주요 구성성분은 wustite (FeO), magnetite (FeO), hematite (FeO)였으며, 산처리를 수행할 경우 대부분의 wustite가 magnetite와 hematite로 전환되었다. Mill scale의 산처리는 HCl과 $H_2O_2$를 이용하여, 염기처리는 NaOH 이용하여, 산-염기 복합처리는 $H_2SO_4$와 NaOH를 이용하여 수행하였다. Oil 제거 및 DI water로 rinsing만 한 경우, 인 흡착용량은 0.28 mgP/g으로 나타난 반면, 염기처리를 한 경우 0.68, 산처리를 한 경우 1.19 mgP/g으로 인 흡착용량이 증가하였다. 산-염기 복합처리 과정을 통해 단일상의 magnetite 입자를 얻을 수 있었으며, 이 입자의 인 흡착용량은 3.11 mgP/g 이상인 것으로 파악되었다. 산화철의 인 흡착에 대한 동력학적 특성 분석결과 Freundlich와 Langmuir 두 등온 흡착모델 모두 magnetite의 인 흡착 거동을 잘 모사하였다. Freundlich 모델의 흡착능(K)과 흡착강도(1/n)를 조사한 결과, 온도가 증가할수록 강한 흡착능을 보이는 것으로 나타났다. Langmuir 모델 적용결과 최대 흡착용량은 $20^{\circ}C$에서 5.1 mgP/g인 것으로 파악되었다.

• 폴리머
• /
• 제30권4호
• /
• pp.350-356
• /
• 2006

실리콘/아크릴수지를 기반으로 한 내후성 도료의 조성이 물성에 미치는 영향을 연구하기 위하여 안료분산 용 및 희석용 실리콘/아크릴수지의 배합비를 중량비율 2 : 8, 3 : 7, 4 : 6 의 3종으로 변화시키면서 내후성 도료를 제조하였다. 제조된 도료의 도막물성 및 내후성이 판단할 수 있는 각종 도막실험을 실시한 결과, 실리콘 성분함량이 증가할수록 열적안정성, 염수분무 및 내후성 등이 향상되었으며, 적정배합비는 2 : 8임을 알 수 있었다. 또한 실리콘 성분을 30 wt% 함유한 도료는 고내후성을 보유함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.107.5-107
• /
• 2002

In this paper, a kinematic optimal design of a new paralleltype rolling mill based upon two Stewart platforms manipulator is investigated. The objective of this new parallel-type rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of the rolls, and tension of the strip. A manipulability measure, as the ratio of the manipulability ellipsoid volume and the condition number of a split Jacobian matrix, is defined. Two kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.220-223
• /
• 2000

In this study for the development of a 3D pattern mill, we designed its layout which has high stiffness and low-weight structure. We calculated the load of each axis component when 3D pattern mill is under the worst cutting conditions. On base of the calculations, we determined the size of its structure and selected main components of the machine. Also, using FEM we analyzed the layout design of 3D pattern mill to reduce the wcight of structure and increase stiffness of it. According to the load position and direction, shapes and values of the deformation and the stress distributions are calculated, also we calculated the natural frequencies and mode shapes in order ta modify and redesign the weak parts

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.180-187
• /
• 1999

This document illustrates the relationship between the wire rod wrinkle defect and the roll caliber design. The wrinkle defect is caused by the incongruent rolling conditions of the roll caliber design, the roll adjustment, and the extracting temperature. In this document, we restrict the study scope to the roll caliber design's effect on wrinkle defect at the base of real condition of the No.2 Wire Rod mill, POSCO. There has been wrinkle defect problem in the No.2 Wire Rod Mill, POSCO for many years. The engineers of the wire rod mill have been making efforts to solve the problem. As one of the efforts, we take the samples of the wire rod in the each stands of the 2'nd wire rod mill and then analyze the samples. Through the analysis, we find out the problem of the roll caliber design. So, we suggest the roll caliber design method to be more effective to weaken the wrinkle defect.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.925-936
• /
• 2003

The manipulability analysis of the parallel-type rolling mill proposed in Hong et al. [1] is re-visited. The parallel rolling mill uses two Stewart platforms in opposite direction for the generation of 6 degree-of-freedom motions of each roll. The objective of this new parallel rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of rolls, and tension of the strip. New forward/inverse kinematics problems, in contrast with [1], are formulated. The forward kinematics problem is defined as the problem of finding the roll-gap and the pair-crossing angle of two work rolls for given lengths of twelve legs. On the other hand, the inverse kinematics problem is defined as the problem of finding the lengths of twelve legs when the roll-gap, the pair-crossing angle, and the position and orientation of one work roll are given. The method of manipulability analysis used in this paper follows the spirit of [1]. But, because the rolling force and moment exerted from both upper and lower rolls have been included in the manipulability analysis, more accurate results than the use of a single platform can be achieved. Two. kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.56-59
• /
• 1988

The main purpose of Set-up control of hot strip mill plant is to obtain the most regular thickness. Then the learning or adaptive computer control in hot strip rolling mill has been developed. But it is very difficult to keep the inter-stands load distribution ratio uniform; so that the deviation of strip flatness is not avoidable. This leads to the degradation of quality of the products. In this report, an improved method base on the steepest descent method including the computation of optimum step size. This method is applied to the off-line simulation. In consequence, the better balances of inter-stands load distribution is achieved in addition to improvements of output thickness of hot strip mill in POSCO.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1095-1102
• /
• 2003

The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining of die is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure the tool wear and evaluated by the measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces the measuring time compared with the measuring methods such as the microscope and CCD.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.149-153
• /
• 2003

The most important thing in measuring the tool wear is to set up the measurement base. The end mill that is being used for machining is difficult to set up the base and to measure the tool wear because of geometric properties of that such as a helix and relief angle. In this study, a new instrument using spindle orientation function in end milling is developed to measure tool wear and evaluated by measuring system on the machine. Finally, this new method makes possible the wear measurement of same position and reduces measuring time compared with measuring methods such as the microscope and CCD.